Gamber-Johnson 7160-0981 Manual


Læs nedenfor 📖 manual på dansk for Gamber-Johnson 7160-0981 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
7160-0982: 10" THERMAL TABLET PROTECTIVE COVER
7160-0981: 8" THERMAL TABLET PROTECTIVE COVER INST-798REV. A
© Copyright 2017 Gamber-Johnson, LLC
Revision
PS-001
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Printing Spec:
FormProduct
INSTALLATION INSTRUCTIONS
INPUT. ANY INPUT GREATER
10" TABLET COVER BACK PLATE
THAN 12 VOLTS WILL REQUIRE AN
ADDITIONAL CONVERTER.
8" TABLET COVER BACK PLATE
ADHESIVE STRIP
USING THE GIVEN ADHESIVE
STRIP, REMOVE THE ADHESIVE
COVERING.
CAREFULLY ALIGN THE HOLE
PATTERNS FROM THE BACK
PLATE AND THE PROTECTIVE
COVER AND PRESS THEM FIRMLY
TOGETHER.
APPLY PRESSURE FOR 30
SECONDS TO ALLOW PROPER
ADHESION.
USING THE PROVIDED
DIAGRAMS CORRECTLY LOCATE
THE HOLE PATTERN FOR YOUR
DOCK.
THE COVER IS THEN MOUNTED IN
BETWEEN THE DOCK AND ANY
MOTION ATTACHMENT.
NOTE: PRODUCTS LISTED
REQUIRE A 12 VOLT DC POWER
THE FOLLOWING INSTRUCTION SHEET IS FOR INSTALLING GAMBER-JOHNSON UNIVERSAL
THERMAL TABLET PROTECTIVE COVERS. THE COVERS ARE DESIGNED TO PROVIDE A
CONSISTENT TEMPERATURE TO MAINTAIN TABLET FUNCTIONALITY.


Produkt Specifikationer

Mærke: Gamber-Johnson
Kategori: Ikke kategoriseret
Model: 7160-0981

Har du brug for hjælp?

Hvis du har brug for hjælp til Gamber-Johnson 7160-0981 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Gamber-Johnson Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Smeg

Smeg KIT6PX Manual

23 December 2024
Smeg

Smeg KIT6CX Manual

23 December 2024
Smeg

Smeg GTA-6 Manual

23 December 2024