Gamber-Johnson 7160-1433 Manual

Gamber-Johnson Ikke kategoriseret 7160-1433

Læs nedenfor 📖 manual på dansk for Gamber-Johnson 7160-1433 (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Revision

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Form Product

INSTALLATION INSTRUCTIONS

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brake lines, electrical, drive train or other systems), air-bags and other safety equipment is

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with original vehicle manufactures specifications

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

1/1

7160-1433

SCANNER POCKET WITH AMPS PLATE

Rev A INST-937

AMP's plate (7160-1433) to a Zirkona joiner with an AMP's mounting plate (7160-

PS-001

Printing Spec:

This instruction sheet is for mounting the Gamber-Johnson scanner pocket with

1261).

Mouinting the device

1. Attach the scanner pocket to the Zirkona Joiner with the #10-32 machine screws

and lock washers provided in hardware bag 7120-0934.