Gigabyte GA-7VT600 1394 Manual

Gigabyte Bundkort GA-7VT600 1394

Læs nedenfor 📖 manual på dansk for Gigabyte GA-7VT600 1394 (96 sider) i kategorien Bundkort. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/96
When you installing AGP card, please make s eur the fo oll wing
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1 5. V) notch"(show b oel w), please ake m sure your AGP
card is AGP 4 8X/ X(1 5. V).
Caution: AGP 2 3 3X( . V) ca srd i no uppo dt s rte by VIA® KT600. You
might ex ep rie cen system un ba le to boot up normall .y
Please insert an AGP 4X X/8 (1 5. V) card
Example 1: Diamond Vipper V770 golden finger is co pam ti lb e with
2X/4X mode AGP slot. It can be s cwit hed be eentw AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2 3X( . .3V)
The GA-7VT600 1394 motherboards might not function properly, if you
install this card without switching the jumper to 4X(1.5V) mode in it.
Exa pm le 2: So em ATi Rage 128 Pro graphics cards made by "Po ew r
Color", the g aphr ics card manufacturer & some S Si 305 cards, their
golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but
they support 2X(3.3V) only.
The GA-7VT600 1394 motherboa dr s might not function properly, If you
install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is ba eds on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) speci if cation. There of re, AG32S ( )G will work
fine with VIA® KT600 based mo het rboards.
Before you install PCI cards, please remo ev the Dual BIOS
label from PCI slots if there is one.
AGP 4X/8X no htc


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-7VT600 1394

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-7VT600 1394 stil et spørgsmål nedenfor, og andre brugere vil svare dig