Gigabyte GA-8GE800 Manual

Gigabyte Bundkort GA-8GE800

Læs nedenfor 📖 manual på dansk for Gigabyte GA-8GE800 (96 sider) i kategorien Bundkort. Denne guide var nyttig for 16 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/96
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has "AGP
4X notch"(show below), please make sure your AGP card is AGP 4X
(1.5V).
Caution: AGP 2X card is not supported by Intel® 845(GE/PE) /
845(E/G) / 850(E). You might experience system unable to boot up
normally. Please insert an AGP 4X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)mode
by adjusting the jumper. The factory default for this card is 2X(3.3V). The
GA-8GE800 (or any AGP 4X only) motherboards might not function properly,
if you install this card without switching the jumper to 4X(1.5) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X
(3.3V) only. The GA-8GE800 (or any AGP 4X only) motherboards might not
function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
specification. Therefore, AG32S(G) will work fine with Intel ®
845(GE/PE) /
845(E/G) / 850(E) based motherboards.


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-8GE800

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-8GE800 stil et spørgsmål nedenfor, og andre brugere vil svare dig