Gigabyte GA-8PENXP Manual

Gigabyte Bundkort GA-8PENXP

Læs nedenfor 📖 manual på dansk for Gigabyte GA-8PENXP (112 sider) i kategorien Bundkort. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/112
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X/8X (1.5V).
Caution: AGP 2X(3.3V) card is not supported by Intel® 845(GE/PE) /
845(E/G) / 850(E)/E7205 / 865(P/G/PE)/875P. You might experience
system unable to boot up normally. Please insert an AGP Pro 4X/8X
(1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-8PENXP motherboards might not function properly, if you install
this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305 cards,
their golden finger is compatible with 2X/4X mode AGP slot, but they
support 2X(3.3V) only. The GA-8PENXP motherboards might not function
properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with Intel® 845(GE/PE) / 845(E/G) / 850(E) /E7205 / 865(P/G/PE)/875P.
based motherboards.
Before you install PCI cards, please remove the Dual BIOS
label from PCI slots if there is one.
AGP 4X/8X no htc


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-8PENXP

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-8PENXP stil et spørgsmål nedenfor, og andre brugere vil svare dig