Gigabyte GA-8VT880 Manual

Gigabyte Bundkort GA-8VT880

Læs nedenfor 📖 manual på dansk for Gigabyte GA-8VT880 (120 sider) i kategorien Bundkort. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/120
When you installing AGP card, please make sure the following
notice is fully understood and practiced. If your AGP card has
"AGP 4X/8X(1.5V) notch"(show below), please make sure your AGP
card is AGP 4X/8X (1.5V).
Caution: AGP 2X(3.3V) card is not supported by VIA PT880. You might
experiencesystem unable to boot up normally. Please insert an AGP
4X/8X (1.5V) card
Example 1: Diamond Vipper V770 golden finger is compatible with
2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X
(1.5V) mode by adjusting the jumper. The factory default for this card is
2X(3.3V).
The GA-8VT880 Series motherboards might not function properly, if you
install this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by
"Power Color", the graphics card manufacturer & some SiS 305 cards,
their golden finger is compatible with 2X/4X mode AGP slot, but they
support 2X(3.3V) only. The GA-8VT880 Series motherboards might not
function properly, If you install this card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on
ATi Rage 128 Pro chip, the design of AG32S(G) is compliance
with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work
fine with VIA PT880 based motherboards.
AGP 4X/8X notch


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-8VT880

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-8VT880 stil et spørgsmål nedenfor, og andre brugere vil svare dig