Gigabyte GA-Z68A-D3H-B3 Manual

Gigabyte Bundkort GA-Z68A-D3H-B3

Læs nedenfor 📖 manual på dansk for Gigabyte GA-Z68A-D3H-B3 (3 sider) i kategorien Bundkort. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
- 1 -- 1 -
English
Enabling RAID mode in BIOS Setup:2.
Turn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-Test). Set
PCH SATA Control Mode Integrated Peripherals RAID(XHD) under the menu to . Then save changes and
exit BIOS Setup.
The BIOS Setup menus described here may differ from the exact settings for your motherboard.
The actual BIOS Setup menu options you will see shall depend on the motherboard you have and
the BIOS version.
CMOS Setup Utility-Copyright (C) 1984-2011 Award Software
Integrated Peripherals
eXtreme Hard Drive (XHD) [Disabled]
PCH SATA Control Mode [RAID(XHD)]
OROM UI and Banner [Enabled]
SATA Port0-3 Native Mode [Enabled]
USB Controllers [Enabled]
USB Legacy Function [Enabled]
USB Storage Function [Enabled]
Azalia Codec [Auto]
Onboard H/W 1394 [Enabled]
Onboard H/W LAN [Enabled]
} SMART LAN [Press Enter]
Onboard LAN Boot ROM [Disabled]
R_USB30 Controller [Enabled]
R_USB30 Turbo [Disabled]
F_USB30 Controller [Enabled]
GSATA3 Controller [Enabled]
GSATA3 Ctrl Mode [IDE]
Onboard Serial Port 1 [3F8/IQR4]

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Item Help
Menu Level }
Follow the steps below to enable the Intel® Smart Response Technology:
Installing a conventional SATA hard disk and a solid-state drive (SSD)1.
Enabling RAID mode in BIOS Setup2.
Installing the operating system and drivers to the SATA disk3.
Launching the Intel Rapid Storage Technology utility to enable the Intel Smart Response 4.
Technology
Installing a conventional SATA hard disk and a solid-state drive (SSD): 1.
Besides the conventional SATA disk, you also need an SSD to make it work as a cache of the hard disk. The
maximum cache memory size is 64 GB. If you use an SSD larger than 64 GB, the space beyond 64 GB can still
be used for storing your data.
The Intel Smart Response Technology requires a computer system with an Intel Z68 Chipset-based
motherboard and an Intel Core series CPU.
The operating system must be installed to the SATA disk.
Supported operating systems include Windows 7 and Windows Vista.
If you have installed the operating system before con guring the Smart Response Technology,
all original data on the hard disk will be lost once you enable RAID mode. It is recommended that
you back up the hard disk before enabling the Smart Response Technology.


Produkt Specifikationer

Mærke: Gigabyte
Kategori: Bundkort
Model: GA-Z68A-D3H-B3

Har du brug for hjælp?

Hvis du har brug for hjælp til Gigabyte GA-Z68A-D3H-B3 stil et spørgsmål nedenfor, og andre brugere vil svare dig