Gioteck FR-1 (PS3) Manual

Gioteck Joystick FR-1 (PS3)

Læs nedenfor 📖 manual på dansk for Gioteck FR-1 (PS3) (2 sider) i kategorien Joystick. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

04 05

0201

90˚

120° STEERING TO THE RIGHT

01 | Steuerkreuz

02 | Aktionstasten

03 | Home-Taste

04 | Select-Taste

05 | Starttaste

06 | Kanal-LED

07 | Stromversorgungs-LED

08 | Empndlichkeitsschalter

09 | R2-Taste

10 | L2-Taste

11 | X Trigger

12 | Trigger

13 | R1-Taste

14 | L1-Taste

15 | USB-Minianschluss

16 | Batteriefach

17 | USB-Dongle

prEcautions

This product has been designed with the

highest concern for safety. However, any

electrical device, if used improperly, has

the potential to cause harm. To help ensure

risk-free operation please pay attention to the

following guidelines.

• Use only as intended. This is a precision

product, handle with care.

• Contains small parts. Not suitable for

children under 3 years of age.

• Store in a dry & dust free area.

• Do not store in areas of extreme heat or

cold, and avoid direct sunlight or heat

sources eg. heaters.

• Do not allow the product to get wet or dirty;

doing so may cause damage.

• Do not clean with benzene, paint thinner,

acetone, alcohol, or other such solvents.

• Do not take the product apart; doing so will

void your warranty and may cause

electrical shock.

warnings

Always follow these instructions

closely. This symbol indicates

important installation, operational or

maintenance instructions.

any interference received, including interference

that may cause undesired operation. Note:

This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instructions, may cause harmful interference

to radio communications. However, there is no

guarantee that interference will not occur in a

particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning

the equipment off and on, the user is encouraged

to try to correct the interference by one or more

of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the

equipment and receiver.

• Connect the equipment into an outlet on a

circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help.

sEt up

1) Plug the USB Dongle into USB Port #1

on the PS3 console.

2) Turn on the console.

3) Open the battery compartment and

insert 2 x AA batteries.

4) Press the “Home” Button to power

on the Freedom Racing Wheel.

5) The FR-1 will automatically select a

channel and an LED will light.

6) Now you can enjoy all of your racing

games with a Gioteck Freedom Wheel!

Press & hold the “Home” button

for 5 seconds to activate pairing

at any time.

EnvironmEnt

Please help to conserve the

environment by recycling the

cardboard packaging of this product.

This product should NOT be disposed

of in normal household waste. It should

be disposed of separately. Please take

it to an electrical waste collection point.

lEgals

This product complies with the following legal

regulations. For further information go to

www.gioteck.com

Gioteck hereby declares that this

controller is in compliance with the

essential requirements and other provisions

of Directive 2004/108/EC. To view the full

version of the Declaration of Conformity

please go online to doc.gioteck.com

Caution: The user is cautioned that changes

or modications not expressly approved by the

party responsible for compliance could void

the user’s authority to operate the equipment.

This device complies with Part 15 of the FCC

Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful

interference, and (2) this device must accept

motion sEnsing calibration

To calibrate your FR1 follow the

instructions below:

1) Place it on a at surface.

2) Press and hold the “Select” & “Home”

buttons simultaneously for 5 seconds

3) All four channel LED's will light.

4) Press the “Start” button to calibrate.

5) Once calibration is complete,

the LED's will turn OFF and the

assigned channel LED will light.

motion stEEring control

1) Tilt the wheel above 30° to activate

motion sensing steering technology.

2) Turn 120° Left/Right for an effective

steering angle. (Note: If you turn the

wheel more than 120°, the steering will

default back to the neutral position.)

3) Tilt between 30° to 145° horizontally for

an effective operational angle.

Lay the FR-1 at during menu

operation to prevent motion

sensor interference.

opEration

POWER ON

To turn on the FR-1, press Home button

once and the LED will light.

POWER OFF

To turn off, press & hold “Select” & the

“O” button simultaneously for 5 seconds.

Note: The FR-1 will automatically turn

off if it is disconnected from the PS3

for 30 seconds or more.

SLEEP MODE

The FR-1 will enter sleep mode if it is

inactive for 5 minutes. To exit sleep

mode, press Home button once.

SENSITIVITY ADJUSTMENT

To adjust the sensitivity, slide the

Sensitivity Switch to your desired level.

Note: Sensitivity Adjustment does

not work during Six Axis Mode.

LOW BATTERY

The Channel LEDs will ash rapidly

when the battery charge is low. You will

need to replace with new batteries.

troublEshooting

i) In some games the racing wheel

must be assigned to Port 1.

To assign The FR-1 to Port 1, press and

hold the “Home” button. The Channel

LED will indicate when the channel

assignment is successful.

ii) The Pedals do not seem to work.

Make sure the trigger pedals have not

been reprogrammed – Please follow the

instructions in the “Reassigning Trigger

Pedals” section.

For further assistance please contact

our customer support team on our

website: www.gioteck.com

Thank you for purchasing the

FR-1 Freedom Racing Wheel

from Gioteck.

We hope that this product will

go beyond your expectations for

a quality made accessory.

Please read this booklet

thoroughly before using the

product and review the PS3™

manual for additional details

regarding PS3™ operation.

Thank you & enjoy!

FR-1

FREEDOM RACING WHEEL

FOR PLAYSTATION 3™

01 | Directional Pad

02 | Action Buttons

03 | Home Button

04 | Select Button

05 | Start Button

06 | Channel LED

07 | Power LED

08 | Sensitivity Switch

09 | R2 Button

10 | L2 Button

11 | X Trigger

12 | Trigger

13 | R1 Button

14 | L1 Button

15 | Mini USB Port

16 | Battery Compartment

17 | USB Dongle

01 | Pad directionnel

02 | Boutons d'action

03 | Bouton Home

04 | Bouton Sélection

05 | Bouton Démarrer

06 | Canal DEL

07 | Alimentation DEL

08 | Interrupteur de sensibilité

09 | Bouton R2

10 | Bouton L2

11 | Gâchette X

12 | Gâchette

13 | Bouton R1

14 | Bouton L1

15 | Mini port USB

16 | Compartiment à piles

17 | Branchement USB

01 | Control de dirección

02 | Botones de acción

03 | Botón Inicio

04 | Botón Selección

05 | Botón Start

06 | LED de canales

07 | LED de encendido

08 | Selector de sensibilidad

09 | Botón R2

10 | Botón L2

11 | Disparador X

12 | Disparador

13 | Botón R1

14 | Botón L1

15 | Puerto miniUSB

16 | Compartimento de baterías

17 | Llave (dongle) USB

01 | Control de dirección

02 | Botones de acción

03 | Botón Inicio

04 | Botón Selección

05 | Botón Start

06 | LED de canales

07 | LED de encendido

08 | Selector de sensibilidad

09 | Botón R2

10 | Botón L2

11 | Disparador X

12 | Disparador

13 | Botón R1

14 | Botón L1

15 | Puerto miniUSB

16 | Compartimento de baterías

17 | Llave (dongle) USB

01 | Pad direzionale

02 | Pulsanti di comando

03 | Pulsante Home

04 | Pulsante di selezione

05 | Pulsante di avvio

06 | LED canale

07 | LED alimentazione

08 | Interruttore sensibilità

09 | Pulsante R2

10 | Pulsante L2

11 | Trigger X

12 | Trigger

13 | Pulsante R1

14 | Pulsante L1

15 | Porta USB Mini

16 | Vano batterie

17 | Dongle USB

01 | Ovladač směru

02 | Akční tlačítka

03 | Tlačítko pro návrat

04 | Tlačítko pro výběr

05 | Tlačítko start

06 | LED pro kanál

07 | Napájecí LED

08 | Tlačítko pro citlivost

09 | Tlačítko R2

10 | Tlačítko L2

11 | X Spoušť

12 | Spoušť

13 | Tlačítko R1

14 | Tlačítko L1

15 | Port USB Mini

16 | Oddíl pro baterie

17 | Bezpečnostní klíč USB

motion sEnsing moDE

The default setting for the Motion Sensing

Mode is the Left 3D Stick.

To change Motion Sensing from the

Left 3D Stick to Six Axis Mode:

1) Press and hold “Select” with “the down

arrow on the D-Pad” for 5 seconds.

2) The Power LED will ash slowly

3 times to indicate the change.

3) To change back to the default setting,

repeat the process above.

Note: Once the power is off,

all program settings will

reset to default.

rEassigning X & triggErs

The default keys for the Trigger Pedals

are the X Trigger & □ Trigger. To change

the Trigger Pedals to the R2 Button &

L2 Button:

1) Press and hold the “Select” & “Start”

buttons simultaneously for 5 seconds.

2) The power LED will ash slowly 3 times

to indicate the change.

3) To change back to the default setting,

repeat the process above.

Note: Once the power is off,

all program settings will

reset to default.

30˚

115˚

EFFECTIVE TILT ANGLE

TILT TO ACTIVATE

MOTION SENSING

90˚

EFFECTIVE TURNING ANGLE STEERING TO THE LEFT120°

FR-1

FREEDOM

RACING WHEEL

FOR PS3™

Produkt Specifikationer

Mærke:	Gioteck
Kategori:	Joystick
Model:	FR-1 (PS3)

Har du brug for hjælp?

Hvis du har brug for hjælp til Gioteck FR-1 (PS3) stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Joystick Gioteck Manualer

Gioteck FR-1 (PS3) Manual

26 November 2024

Gioteck GC-1 (PS3) Manual

26 November 2024

Gioteck HF-2 (PS3) Manual

26 November 2024

Gioteck SC-1 (PS3) Manual

26 November 2024

Gioteck GC-2 (PS3) Manual

26 November 2024

Gioteck HF-1 (PS3) Manual

26 November 2024

Gioteck VX-1 (PS3) Manual

26 November 2024

Gioteck GC-2 Manual

25 November 2024

Gioteck VX-1 Manual

25 November 2024

Joystick Manualer

Nyeste Joystick Manualer

Steca Solarix PRS 1010 Manual

19 November 2024

Steca Tarom 440 Manual

19 November 2024

Asustor AS-T10G3 Manual

16 November 2024

Audibax MC1000 Manual

2 November 2024

PCE Instruments PCE-RE21R Manual

18 Oktober 2024

PCE Instruments PCE-RE100P Manual

18 Oktober 2024

Icon P1-Nano Manual

30 September 2024

Icon iKeyboard 3 Mini Manual

30 September 2024

Icon iKeyboard 4 Mini Manual

30 September 2024

Icon V1-X Manual

30 September 2024