Honeywell RPLS730B1000 Manual

Honeywell Skifte RPLS730B1000

Læs nedenfor 📖 manual på dansk for Honeywell RPLS730B1000 (12 sider) i kategorien Skifte. Denne guide var nyttig for 55 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/12
INSTALLATION AND USER GUIDE
69-2457EFS-05
RPLS730B / RPLS731B
Programmable Wall Switch
APPLICATIONS
The RPLS730B / RPLS731B programmable wall switch has been designed to
control lightings and motors:
INSTALLATION
NOTE: This switch cannot be used if there are not at least 2 white wires joined
by a connector inside the electrical box.
1. Cut power at the circuit breaker to avoid electric shock.
2. Remove the existing switch.
3. Install the new switch as shown in the diagram below.
4. Apply power at the circuit breaker.
Load type Maximum load Examples
Resistive load 2400 W (20 A @ 120 V) incandescent lights
halogen lights
block heater
Inductive load 2400 W (20 A @ 120 V) fluorescent lights
compact fluorescent lights (CFL)
sodium lamps
electronic ballasts
Motor 1 hp pool filter pumps
fans
M38497
120 VAC (line)
blue (load)
white (neutral)
Load
black (line)


Produkt Specifikationer

Mærke: Honeywell
Kategori: Skifte
Model: RPLS730B1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Honeywell RPLS730B1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Skifte Honeywell Manualer

Skifte Manualer

Nyeste Skifte Manualer