Honeywell ST9500C Manual
Honeywell
Temperaturkontrol
ST9500C
Læs nedenfor 📖 manual på dansk for Honeywell ST9500C (1 sider) i kategorien Temperaturkontrol. Denne guide var nyttig for 21 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/1
Guide to the Use of the ST9500C Programmer
This user guide is for guidance only and at the time of production represented the latest information available to Honeywell from various sources.
Honeywell reserves the right at any time and without notice to change any product, specification or any other information contained in this publication and
cannot accept any responsibility for loss or damage arising out of any errors that may inadvertently be contained herein.
EN2H-2101 UK01 R1009
honeywelluk.com
How do I use the OVERRIDE buttons?
There are two OVERRIDE buttons, one for ZONE
1 and one for ZONE 2 (marked on the image).
To turn ZONE 1 on and override the set
programme press the ZONE 2 OVERRIDE button
marked in the picture. The indicator light will light
up to confirm ZONE 1 is on.
To turn ZONE 1 off again press the OVERRIDE
button.
Alternatively the next time the programmer is set
to switch on or off the override will be cancelled.
The OVERRIDE button will only work in the AUTO
and ONCE modes. It will NOT work in the OFF or
CONT modes. To change the mode press the
button marked ‘A’ for and ‘B’ for ZONE 1 ZONE 2
in the picture. Each time you press the button it will
move through the list of modes above it.
To override ZONE 2 follow the same instructions
as above but with the ZONE 2 override button
marked in the picture.
How do I use the EXTRA HOUR buttons?
There are two EXTRA HOUR buttons, one for
ZONE 1 and one for ZONE 2 (marked on the
image).
Press the button once to bring ZONE 1 or ZONE 2
on for 1 hour. Press the button a second time to
bring them on for 2 hours and a third for 3 hours.
To turn the override off press the button a fourth
time.
The EXTRA HOUR button will only work in the
AUTO, ONCE and OFF modes. It will NOT work in
the CONT mode. To change the mode press the
button marked ‘A’ for ‘B’ for ZONE 1 and ZONE 2
in the picture. Each time you press the button it will
move through the list of modes above it.
CONT
ONCE
OF F
EXTRA HOUR
OVERRIDE
EXTRA HOUR
ZONE 1 ZONE 2
OVERRIDE
CONT
ONCE
AUTO AUTO
OF F
CONT
ONCE
OF F
EXTRA HOUR
OVERRIDE
EXTRA HOUR
ZONE 1 ZONE 2
OVERRIDE
CONT
ONCE
AUTO AUTO
OF F
Zone 1
EXTRA HOUR
Zone 2
EXTRA HOUR
Zone 2
OVERRIDE
Zone 1
OVERRIDE
Zone 1
indicator light
Zone 2
indicator light
A
B
List of
modes for
Zone 2
List of
modes for
Zone 1
Produkt Specifikationer
| Mærke: | Honeywell |
| Kategori: | Temperaturkontrol |
| Model: | ST9500C |
Har du brug for hjælp?
Hvis du har brug for hjælp til Honeywell ST9500C stil et spørgsmål nedenfor, og andre brugere vil svare dig
Temperaturkontrol Honeywell Manualer
7 Juli 2024
6 Juli 2024
5 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
28 Juni 2024
Temperaturkontrol Manualer
- Temperaturkontrol Bosch
- Temperaturkontrol AEG
- Temperaturkontrol Atag
- Temperaturkontrol Buderus
- Temperaturkontrol Barbecook
- Temperaturkontrol Danfoss
- Temperaturkontrol Junkers
- Temperaturkontrol Elco
- Temperaturkontrol Viessmann
- Temperaturkontrol Remeha
- Temperaturkontrol Tado
- Temperaturkontrol EQ-3
- Temperaturkontrol Nefit
- Temperaturkontrol Bulex
- Temperaturkontrol ICY
- Temperaturkontrol WTH
- Temperaturkontrol Sentiotec
- Temperaturkontrol Velbus
- Temperaturkontrol Plugwise
- Temperaturkontrol Sabi
- Temperaturkontrol Thermomax
- Temperaturkontrol Landis Staefa
- Temperaturkontrol Infresco
Nyeste Temperaturkontrol Manualer
21 December 2024
20 December 2024
5 Oktober 2024
21 September 2024
15 September 2024
26 August 2024
24 August 2024
24 August 2024
23 August 2024
23 August 2024