JANDY JE3000TR3 Manual

JANDY Warmtepomp JE3000TR3

Læs nedenfor 📖 manual på dansk for JANDY JE3000TR3 (96 sider) i kategorien Warmtepomp. Denne guide var nyttig for 14 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/96
Jandy®
JE Heat Pump
INSTALLATION AND
OPERATION MANUAL
H0408600_REVF
WARNING
FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in
pool equipment by the jurisdiction in which the product will be installed where such state or local requirements
exist. The maintainer must be a licensed HVAC technician certified in heat pump repair and maintenance
by the jurisdiction in which the product will be installed where such state or local requirements exists. The
technician must possess and comply with all certifications and regulations regarding the purchasing, handling,
transportation and reclamation of R410A refrigerant. In the event no such state or local requirement exists, the
installer or maintainer must be a professional with sufficient experience in pool equipment installation and
maintenance so that all of the instructions in this manual can be followed exactly. Before installing this product,
read and follow all warning notices and instructions that accompany this product. Failure to follow warning
notices and instructions may result in property damage, personal injury, or death. Improper installation and/or
operation will void the warranty.
Improper installation and/or operation can create unwanted electrical hazard which can cause
serious injury, property damage, or death.
ATTENTION INSTALLER - This manual contains important information about the installation,
operation and safe use of this product. This information should be given to the owner/operator
of this equipment.


Produkt Specifikationer

Mærke: JANDY
Kategori: Warmtepomp
Model: JE3000TR3

Har du brug for hjælp?

Hvis du har brug for hjælp til JANDY JE3000TR3 stil et spørgsmål nedenfor, og andre brugere vil svare dig