JL Audio MBT-RX Manual


Læs nedenfor 📖 manual på dansk for JL Audio MBT-RX (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 17 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
MBT-RX
BLU E TOOT H® AUDIO RECE I VER
Pairing your device (required for operation):
1. Ensure your streaming device has Bluetooth® enabled and
that power is applied to the MBT-RX. (The blue LED on the
MBT-RX will blink to indicate it is in pairing mode.)
2. Within your streaming device’s Bluetooth® setup menu,
select “MBT-RX” from the list of pairable devices.
3. When successfully connected, the Blue LED on the MBT-RX
will stop blinking and remain lit. A single beep will be heard
through the connected audio system.
Multiple devices can be paired to the MBT-RX, but only one
streaming device can connect at one time.
The MBT-RX will remember the last device that was connected
to it and reconnect with it automatically. If that streaming
device is not active, then other paired streaming devices can
connect manually, or new streaming devices can be paired.
When a connected streaming device is out of range for more
than one minute, the MBT-RX will automatically disconnect this
streaming device and return to pairing mode (LED will blink).
Controlling audio playback:
1. Once connected, audio is controlled from the streaming
device. This includes volume and media selection.
2. The MBT-RX can be installed out of sight, as it has no user
controls that need to be accessed.


Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: MBT-RX

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio MBT-RX stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret JL Audio Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer