JL Audio Stealthbox SB-N-TTNCRW/10W1v3/BK Manual

JL Audio Ikke kategoriseret Stealthbox SB-N-TTNCRW/10W1v3/BK

Læs nedenfor 📖 manual på dansk for JL Audio Stealthbox SB-N-TTNCRW/10W1v3/BK (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Stealthbox®
I N S T A L L A T I O N G U I D E
SB - N - T T CRW / 1 0 W3 v2 , JL AU D IO, I n c 2 0 0 4 Sh e e t S K U # 0 1 1 9 2 Re v i s io n 1 0 / 9 /2 0 0 4 Pag e 1
for the
SB-N-TTNCRW/210W3v2
(04-Up Nissan Titan Crew Cab)
This Stealthbox is a product which
requires professional installation skills and
tools.
Please read this installation guide thor-
oughly before beginning the project. It
will guide you step by step through the
installation. Several of the steps in this
process may require two people to
accomplish.
It is absolutely vital that the enclosure
be properly mounted to the vehicle
according to these instructions. Failure
to mount the enclosure properly pres-
ents two problems: 1) The sub-bass
performance will suffer due to the
movement of the enclosure caused by
the force exerted by the woofer(s) and
2) A loose enclosure presents a serious
safety hazard in the event of a collision
or sudden deceleration.
Please enjoy your JL Audio Stealthbox
responsibly.
STEP 1:
The wax square needs to be placed
into the curvature of the floor bulk head.
STEP 2:
With the passenger side rear seat
lifted, out of the way.
Measure 8” from the left floor corner to the
middle of the placed wax square.
Once placement is found, remove the paper
backing and adhere to the carpet.
STEP 3:
Place the supplied socket cup set
screw into the enclosure, leaving 1/4”
exposed.
STEP 4:
Place the enclosure into position and
press down firmly.
Make sure that the enclosure does not move
around when placing the enclosure into posi-
tion.
Once the wax square is marked, remove the
enclosure out of vehicle.
STEP 5: *CAUTION*
Before drilling, make sure that you are not going to
be drilling into any gas lines, brake lines, transmission
lines, electrical wiring, transfer case(4x4 vehicles) or
anything else that might cause a reduction in your
weekly pay. Always wear eye protection when drilling.
With the use of a 1/2” drill bit and drill. Drill out the
floor at the impression on the wax square.
STEP 6:
With the enclosure removed out of
the vehicle, expose 1-1/2 of the socket cup
set screw.
START
HERE
Continued on Next Page
w w w . j l a u d i o . c o m


Produkt Specifikationer

Mærke: JL Audio
Kategori: Ikke kategoriseret
Model: Stealthbox SB-N-TTNCRW/10W1v3/BK

Har du brug for hjælp?

Hvis du har brug for hjælp til JL Audio Stealthbox SB-N-TTNCRW/10W1v3/BK stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret JL Audio Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kramer

Kramer VP-8X8 Manual

25 November 2024
Kramer

Kramer PT-2C Manual

25 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Dometic

Dometic DPS 80 Manual

25 November 2024
Kramer

Kramer 102MX Manual

25 November 2024
Kramer

Kramer FC-18 Manual

25 November 2024
Kramer

Kramer DSP-62-UC Manual

25 November 2024
Tiger

Tiger SKF-H101 Manual

25 November 2024