Klipsch S1 True Wireless Manual

Klipsch Hoofdtelefoon S1 True Wireless

Læs nedenfor 📖 manual på dansk for Klipsch S1 True Wireless (4 sider) i kategorien Hoofdtelefoon. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/4
GETTING STARTED FOR KLIPSCH S1 TRUE WIRELESS
INITIAL SET UP AND PAIRING:
1. Turn on the earphones by holding down the touch buttons (over the logo) on
both earphones for 3 seconds.
2. Once they are turned on you will hear a prompt indicating that the Left and the
Right Channels have been connected to each other.
3. Now it is time to pair them to your phone. Open up the Bluetooth connection
menu of your smartphone or tablet. Connect to “S1” or “Klipsch S1 True
Wireless”. If it does not connect right away wait 5 seconds and try again.
4. Once connected the earphones will recognize your device and will
automatically connect to it every time they are powered on in the future.
AUTO POWER ON/OFF:
There are 2 ways to power on the earphones:
1. If they are in the charging case simply remove the earphones without touching
the touch buttons to auto power on the earphones.
2. If they are not in the charging case or the case has run of power, press the
touch buttons on both earphones for 3 seconds to power on.
There are 2 ways to power off the earphones:
1. To auto power off place the earphones back into the charging case. After 5
seconds the earphones will automatically turn off and begin the charging
process. These features may not work if the charging case has been fully
depleted of power.
2. To manually power off press and hold the touch button over the logo of the
earphone for 3-5 seconds.
CHARGING THE EARPHONES:
1. To charge the earphones simply place them into the corresponding areas of the
charging case. Make sure they are securely in the correct position.
2. Close the lid.
3. The red indicator lights will turn on to indicate that they are charging. When
charging is complete the red lights will turn off. The blue indicator lights on the
charging case show the current power level remaining in the charging case.
CHARGING THE CASE:
1. To charge the power case plug in the included micro USB cable to the rear of the
case. Then plug the other end into a power source such as a computer or a USB
wall charger.
2. Charging is complete when all 4 LED lights are solid blue.
3. This is also compatible with wireless charging.
4. Simply place the charging case with the Klipsch brand facing upward on to a
powered wireless charging pad and charging will automatically begin.
S1
TRUE
WIRELESS


Produkt Specifikationer

Mærke: Klipsch
Kategori: Hoofdtelefoon
Model: S1 True Wireless

Har du brug for hjælp?

Hvis du har brug for hjælp til Klipsch S1 True Wireless stil et spørgsmål nedenfor, og andre brugere vil svare dig




Hoofdtelefoon Klipsch Manualer

Hoofdtelefoon Manualer

Nyeste Hoofdtelefoon Manualer

Trust

Trust 22134 Manual

16 September 2024
Speed-Link

Speed-Link Picus Manual

16 September 2024
AKG

AKG K72 Manual

15 September 2024
JBL

JBL Synchros E10 Manual

15 September 2024
AV:link

AV:link PBH10 Manual

15 September 2024
TCL

TCL ACTV500TWS Manual

14 September 2024
Yamaha

Yamaha HPH-MT5W Manual

14 September 2024
Reloop

Reloop RHP-6 Manual

14 September 2024