Kramer SI-1VGA Manual

Kramer Controller SI-1VGA

Læs nedenfor 📖 manual på dansk for Kramer SI-1VGA (2 sider) i kategorien Controller. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
The Kramer SI 1VGA- - Step in Module
Congratulations on purchasing your Kramer SI-1VGA Step-in Module which is ideal for
boardrooms and presentation rooms.
The Kramer VGA and unbalanced stereo audio remoteSI-1VGA is a control panel that
can, for example, the Kramer fit into TBUS-10 Table Connection Box (see Figure 3) or
the The K-POD301 . Podium Table Bus SI-1VGA is used for remotely taking control of
a compatible switcher, for example, the VP-81KSi.
Figure 1 and Table 1 define the SI- 1VGA Step-in Module.
Figure SI Front Panel 1: - -1VGA Step in Module and Rear View
Table SI1: - -1VGA Step in Module Front and Rear Features
# Feature Function
1 VIDEO INPUT VGA 15-pin HD
(F) Connector
Connect to video sourcethe
2 AUDIO INPUT 3.5mm Mini
Jack
Connect to nced stereo audio source the unbala
3 STEP IN Button Press to switch the input to this remote control panel. LED lights yellow
when active
4 AUDIO OUTPUT 3.5mm Mini
Jack
Connect to unbalanced stereo audio inputthe of the switcher
5 VIDEO OUTPUT VGA 15-pin
HD (F) Connector
Connect to video inputthe of the switcher. (The cable used must connect
all pins, for example, Kramer cable CP-GMA/GMA/XL)
Figure 2 shows the wiring connections of the SI-1VGA.
Figure SI2: - 1VGA Wiring Connections
To install as illustrated in and connect the SI- 1VGA Figure 2:
Note: The eps assume that you have video (with 15 tfollowing s -pin HD (M)
connectors) and audio (with 3.5mm mini jacks) cables running from the switcher
inputs to the inside of either the TBUS-10 (see Figure 3) or the
K-POD301, depending on which you are using.
1. Connect the video cable in the TBUS- /K-10 POD301 -to the 15 pin HD VIDEO
OUTPUT connector on the rear of the SI-1VGA.
2. Connect the audio cable in the TBUS- /K-10 POD301 to the 3.5mm mini jack
AUDIO OUTPUT connector on the rear of the SI-1VGA.
3. . Insert the SI-1VGA into the required cutout of the TBUS- -10/K POD301
4. Insert the two screws to secure the module in place and tighten the screws.
5. Plug the video source (for example, a computer) into the 15-pin HD VIDEO
INPUT connector on the front panel of the SI- .1VGA
6. Plug the audio source (for example, a computer) into the 3.5mm mini jack AUDIO
INPUT connector on the front panel of SI-1VGA.
7. . Press the STEP IN button to take control of the switcher input


Produkt Specifikationer

Mærke: Kramer
Kategori: Controller
Model: SI-1VGA

Har du brug for hjælp?

Hvis du har brug for hjælp til Kramer SI-1VGA stil et spørgsmål nedenfor, og andre brugere vil svare dig




Controller Kramer Manualer

Kramer

Kramer KT-107 Manual

21 August 2024
Kramer

Kramer SL-240C Manual

21 August 2024
Kramer

Kramer RC-8iR Manual

20 August 2024
Kramer

Kramer RC-63DLN Manual

20 August 2024
Kramer

Kramer VA-8XL Manual

20 August 2024
Kramer

Kramer SI-1VGA Manual

19 August 2024
Kramer

Kramer RB-6 Manual

19 August 2024
Kramer

Kramer SL-1N Manual

18 August 2024
Kramer

Kramer FC-26 Manual

18 August 2024
Kramer

Kramer SL-12 Manual

17 August 2024

Controller Manualer

Nyeste Controller Manualer