Kraun Bluetooth Headset Manual

Kraun Hovedtelefon Bluetooth Headset

Læs nedenfor 📖 manual på dansk for Kraun Bluetooth Headset (2 sider) i kategorien Hovedtelefon. Denne guide var nyttig for 49 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

www.kraun.it

Bluetooth Headset

Event Button Duration

Power On 1 Long

Power Off 1 Very Long

Enter Pairing Mode 1 Very Long

Voice Dial 1 Short

Answer 1 Short

Reject 1 Long

Redial 1 Double

Accept Waiting Hold Active 1 Long

Add Held ToTWC 2 Long

Volume Up 2 Short

Volume Down 3 Short

Transfer audio 1+2 Long

Toggle Mute 2+3 Long

1. Charging the battery:

Your headset has a built-in Lithium-Ion battery which must be

fully charged before you use the headset first time. For the

charging first time, you need to charge it for 3 hours. During

the charging, the indicator shows a steady red light. When

the battery is fully charged, the red light will turn off. For later

on charging, it will take 60 minutes to fully charge the battery

or you found the red light has turned off. You can charge the

headset either by using the USB charger (USB charging cable)

or the car charger depending upon the package accessories

available. Please check your package for details.

1.1. lf your package has a USB charger included:

Plug the charge lead of USB charger into the charging port of

your Bluetooth headset. And then, plug the other end of the

USB charger into the PC/Mac’s USB port. When charging is

complete (Red indicator turns off),

Remove the USB charger and remove the charge lead from

your headset. (Please refer to Fig.4.1, Fig 4.2)

1.2. If your package has a car charger included:

Plug the car charger into the cigarette lighter socket. And

then,plug the charge lead into the charging port on the

Bluetooth headset. When charging is complete (Red indica-

tor turns off),remove the car charger and remove the charge

lead from the Bluetooth headset. (Please refer to Fig.4.1, Fig

4.3)

2. Turning the headset on or off:

(a) Press the “Button 1” for nearly 3 seconds. You will hear two

beep sounds and the blue indicator will begin to flash. The

headset is now powered on.

(b) When the power is on, press the “Button 1” for 5 seconds.

You will hear two beep sounds and the red indicator will

flash. Now the headset is turned off. (Please refer to Fig.5

and Fig.6)

3. Pairing the headset:

(a)The headset must be powered off before you begin to

initiate the pairing. Press the “Button 1” till the blue and red

indicators begin to flash alternatively. The headset is now in

pairing mode.

(b)lnitiate the pairing process of your Bluetooth mobile phone.

(Please refer to the manual of your mobile phone.)

(c)When asked the PIN code, please enter “OOOO” to suc-

cessfully complete the pairing process.

(d)When the pairing process is successfully completed,

the blue indicator will flash. The headset is now in standby

mode.

(e) After the headset is successfully paired with your mobile

phone, in some case, you will still have to connect the head-

set with your mobile phone (please refer to the mobile phone

manual). (Please refer to Fig.7.)

Note:

(1)If the headset is not in pairing mode, your mobile phone

can not find the headset. Please set the headset into pairing

mode before you start to pair

the headset with your phone.

(2)If no pairing is possible over a period of time (Aprox.1 min-

ute), the pairing process will be stopped. You have to repeat

STEP 4 to successfully complete the pairing.

4. Answering or ending calls:

When the headset is paired with your phone, and when there

is an incoming call,you will hear a musical ring. Then press

the “Button 1” to answer the call. When there is a call in ses-

sion, you can press the “ Button 1 “ to end the call.

Note:

Because of the different design of some mobile phones, a

disconnection may automatically happen even when the

headset is powered on. In this case, the headset will not ring

if there is an incoming call. Press “Button 1” for 1 second to

re-connect the headset with the mobile phone for an incom-

ing call.

(Please refer to Fig.8.)

5. Making calls:

(a) Voice-dialing:

Press the “Button 1”. After hearing a beep sound, say the

name of the person you recorded on your phone. (The avail-

ability of this function depends on the design of the mobile

phone you use. Please refer to the manual of your mobile

phone for the voice-dialing function.)

(b)Dial the phone number on you mobile phone as you nor-

mally do. The sound will be transmitted to the headset au-

tomatically.

6. Changing the volume of the Headset:

(a) Press the “Button 2” to increase the listening volume of

the headset.

(b) Press the “Button 3” to decrease the listening volume of

the headset.

Please refer to the manual of your mobile phone.

7. Redialing the call:

After ending the call, you can double press the “Button 1” to

redial the call you just ended. (The availability of this function

depends on the design of the mobile phone you use. Please

refer to the manual of your mobile phone.)

8. Mute function:

You may have to keep a call on line while talking to others.

Push the “Button 2” and the “Button 3” at the same time for

one second. You will hear continuous beep sounds. Now the

headset is in “Mute function” mode. To disable the “Mute

function”, press the “Button 2” and the “Button 3” at the same

time once again.

9. Rejecting a call

When there is a call in session, you can press the “Button 1”

for three seconds to reject a call.

Trouble-Shooting:

1.The red indicator flashes:

it indicates that headset is in low-battery. Charge the battery

until the red indicator is turned off.

2. If no connection between the headset and your phone:

make sure that the bluetooth headset fully charged. Repeat

the step 3 to complete the pairing process. Make sure that

the headset is within 10 meters of your phone and that there

are no obstructions such as walls or other electronic device

between the headset and your phone. If the steps above do

not solve the problem, please refer to the manual of your mo-

bile phone for more information.

Note:

This headset is complied with Bluetooth Specification 1.2.

However, the interoperability of this headset and other de-

vices is not guaranteed because of the compatibility.

Product Care:

(1) Avoid humidity, liquid or moisture as this device is

not water-proof.

(2) Avoid high and low temperature, especially in a car.

(3) Please do not dissemble the headset.

(4) Please do not use chemical, cleaning solvent or strong de-

tergent to clean the headset. And avoid sharp object.

(5) Please do not change or modify the headset. Any change

or modification will void the warranty of the product.

(6) Do not dispose the headset into a fire. This may result in

an explosion.

(7) Use only the attached charger when you charge the head-

set.

Safety instructions:

(1) Check local laws about the use of mobile phone and

headset while driving. For your own safety, please focus on

the road while using the headset.

(2) Please turn off the headset according to the sign of the

specified areas that requires an electric device to be switch

off. These areas include the hospital, aircraft, and blasting

area or potentially explosive atmosphere.

(3) Do not store the headset in the air-bag deployment area.

This may result in an injury when the air-bag deploys.

(4) Do not dissemble the charger. It may expose you to the

danger of electric shock.

Warning

The manufacturer is under no circumstances liable for any

unauthorised modifications made to the product by the user

or any other parties which may compromise its conformity

and safety.

Button 1

Pulsante 1

Button 2

Pulsante 2

Button 3

Pulsante 3 DC Input

Ingresso DC Fig.1 Fig.2 Fig.3

Fig.4.1 Fig.4.2 Fig.4.2 Fig.4.4

Fig.5 Fig.6

Fig.7 Fig.8

Quick Guide

Produkt Specifikationer

Mærke:	Kraun
Kategori:	Hovedtelefon
Model:	Bluetooth Headset
Vægt:	7 g
Produktfarve:	Sort, sølv
Produkttype:	Headset
Bluetooth:	Ja
Forbindelsesteknologi:	Trådløs
Bæremåde:	Ørekrog
Headset type:	Mono
Trådløs rækkevidde:	10 m
Ørekobling:	Intraaural