Kuzco Latitude-Slim VL4721-CH Manual

Kuzco Lys Latitude-Slim VL4721-CH

Læs nedenfor 📖 manual på dansk for Kuzco Latitude-Slim VL4721-CH (1 sider) i kategorien Lys. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Remove the fixture from its original packaging and remove the
fixture mounting plate from within the hardware package.
Attach the fixture mounting plate to the electrical junction box
(1a) on the wall using the two screws provided in the hardware
package.
Attach the xture (2a) to the mounting plate (2b), which is attached
to the electrical junction box on the wall. First attach all wiring
with the provided marrets (2c) (white to white “N”, black to black
“L”, ground to ground “G”). Secure the mounting plate (2b) to the
junction box using the two threaded bolts. Connect the xture (2a)
to the mounting plate. Be sure to align the two support bolts to the
exture plate holes (2a). Once this is complete you can screw on
the decorative nuts (2e) until the xture (2a) is secured to the wall.
You have now completed the installation of your xture,
enjoy.
1.
2.
3.
Single lamp vanity with white squared acrylic VL4721-CH
INSTALLATION SHEET
START FROM HERE
Make sure power is completely o at the fuse box.
Have your xture installed by a qualied licensed
electrician
Prepare everything in clear area.
Wear gloves at all times during this installation.
Read instructions carefully before you start assembly.
Keep this instruction sheet for future reference.
Technical Support: 1-877-452-6858
Install the acrylic cover (3a) onto the xture. The acrylic cover is
installed by gently pushing it foward between the two end
plates. When the acrylic meets the xture increase pressure util
the acrylic catches the xtures top and bottom leading edges
by the bracket. Lastly, connect the decorative end plates (3b)
to the xture using the machine screws provided.
Please Note:
• All Kuzco LED fixtures come with pre-wired LED
module(s).
• Unless instructed to do so, please do not touch any part
of the LED module(s) as any unnecessary contact with the
module could cause permanent damage.
• For dimming, an ELV (Electronic Low Voltage) dimmer is
required.
4.
2c
1a
2d 2b
2a
3a
3b
2e


Produkt Specifikationer

Mærke: Kuzco
Kategori: Lys
Model: Latitude-Slim VL4721-CH

Har du brug for hjælp?

Hvis du har brug for hjælp til Kuzco Latitude-Slim VL4721-CH stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Kuzco Manualer

Lys Manualer

Nyeste Lys Manualer