Lazer Cage KinetiCore Manual

Lazer Ikke kategoriseret Cage KinetiCore

Læs nedenfor 📖 manual på dansk for Lazer Cage KinetiCore (1 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
1. The Cage KinetiCore helmet comes with a
set of thinner spare cheek padding in the box.
2. These can be exchanged with the standard
thick cheek pads to adjust the t of the helmet
according to the riders comfort preferences.
3. The cheek pads
are attached to
the helmet via 3
mushroom mounts.
4. To remove each pad, grab it and pull it
away from the helmet until the mushroom
mount pops out of it’s basket.
5. Repeat this for each mushroom
basket, then repeat on the other side.
6. To install the thinner cheek pads,
align the mushroom with the mushroom
baskets and rmly push them in.
7. Ensure all 3 mushroom mounts are securely
connected, then repeat on the other side.
8. Thick pads give a more secure and
tighter t for a more condent feeling.
9. Thinner pads allow more ventilation and an
open feeling when the helmet is being worn.
10. Additional spare padding sets
are available through your local
distributor based on availability.
Cage KinetiCore
How to change the cheek pads


Produkt Specifikationer

Mærke: Lazer
Kategori: Ikke kategoriseret
Model: Cage KinetiCore

Har du brug for hjælp?

Hvis du har brug for hjælp til Lazer Cage KinetiCore stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Lazer Manualer

Lazer

Lazer Cage KinetiCore Manual

19 December 2024
Lazer

Lazer Urbanize MIPS Manual

26 November 2024
Lazer

Lazer Cameleon DLX Manual

26 November 2024
Lazer

Lazer Bob+ Manual

25 November 2024
Lazer

Lazer Armor 2.0 Manual

29 August 2024
Lazer

Lazer Impala Manual

29 August 2024
Lazer

Lazer Coyote Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer