Marc Jacobs FS20 Manual

Marc Jacobs Ur FS20

Læs nedenfor 📖 manual på dansk for Marc Jacobs FS20 (7 sider) i kategorien Ur. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/7
2
caseback time setting
time setting
1. push button to move hands.
2. set to correct time.
english
date models
date setting
1. pull the crown out to position 2.
2. turn the crown either clockwise or counter-clockwise and set the date for the
previous day. the direction that moves the date varies on different watch models.
time setting
1. pull the crown out to position 3.
2. turn crown to advance the time and continue until the day/date changes to the
present day.
3. set to the correct time.
4. push crown back to position 1.
321
date
front
pusher
button
for time
adjustment back
3
chronograph with date fs20
(1 crown/2 pushers)
time setting
1. pull crown out to position 3. chronograph second hand will return to zero position.
do not return the crown to its normal position while the hands are returning to zero,
or else the position the hands are at when this is done will be recognized as the new
zero position.
2. turn to set hour, minute and 24 hour hands.
3. return crown to position 1.
date setting
1. pull crown out to position 2.
2. turn clockwise to set the date.
3. return crown to position 1.
chronograph operation
1. push a to start/stop the chronograph.
2. push b to reset the chronograph.
chronograph zero reset
1. pull crown out to position 3.
2. press a to set the chronograph second hand to 12:00 (zero) position. each press
advances the chronograph second hand one mark. if a is held down for over 2 seconds,
the chronograph second hand advances continuously.
3. return crown to position 1.
321
a
b
chronograph
second hand
chronograph
minute hand
24-hour hand
date
second hand
4
chronograph stopwatch vd53b
(1 crown/2 pushers)
time and date setting
1. before setting the time, make sure the chronograph is stopped and set to zero
(12:00) position.
2. pull crown out to position 2.
3. turn crown clockwise until the previous day’s date is displayed.
4. pull crown out to position 3 when the second hand is at the 12:00 position.
5. turn crown to set time.
note: 24-hour hand moves correspondingly with the hour and minute hands. when setting
the time be sure to check that the 24-hour hand is set properly.
6. return crown to position 1.
note: when the crown is in position 2, do not press the pushers. otherwise the
chronograph hands will move.
chronograph
1. press a to start/stop the chronograph.
2. press b to reset to zero.
split time
1. press b while the chronograph is running.
2. press b again to return to the chronograph.
3. press a to finalize timing.
4. press b to reset.
chronograph zero reset
1. if either of the chronograph hands is not at the zero (12:00) position, pull crown out to
position 3.
2. press a to move hands clockwise; press b to move hands counter-clockwise.
3. return crown to position 1.
321
a
b
24-hour hand
minute hand
second hand
6
digital fl133
time and date setting
1. press b three times in the time/calendar mode to enter into the time setting mode. second
will start flashing.
2. press c to adjust seconds to “00”.
3. press d to next setting item. setting sequence will be cycled by second, minute, hour,
date, month and day of week.
4. press c to adjust the flashing digit.
5. press b to return to the normal time mode.
alarm setting
1. in the time/calendar mode, press b twice to switch to alarm mode. hour will start
flashing.
2. press d to select next setting item. minute will be set and flashing.
3. press c to adjust flashing digit.
4. press b to return to the normal time mode from alarm setting mode.
alarm on/off and sound
1. hold c and depress d button at normal time mode to switch alarm on/off.
2. the alarm will sound for 30 seconds and can be stopped by pressing the c or d.
chime on/off
hold c and depress the b button to set chime on/off in normal time mode.
using the chronograph
1. press c to start/stop measurement.
2. press d to reset the chronograph.
3. press d to measure a split time while the chronograph is timing.
4. press d to return the display to the chronograph measurement.
5. press d to finalize the split time display with the chronograph in the split stop state.
6. press d to reset the chronograph.
AC
B D

Produkt Specifikationer

Mærke: Marc Jacobs
Kategori: Ur
Model: FS20

Har du brug for hjælp?

Hvis du har brug for hjælp til Marc Jacobs FS20 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Marc Jacobs Manualer

Marc Jacobs

Marc Jacobs FDT0013 Manual

23 August 2024
Marc Jacobs

Marc Jacobs FS20 Manual

22 August 2024
Marc Jacobs

Marc Jacobs 5040B Manual

21 August 2024
Marc Jacobs

Marc Jacobs FL133 Manual

17 August 2024

Ur Manualer

Nyeste Ur Manualer

Casio

Casio Edifice EFV-600 Manual

7 April 2025
Casio

Casio Edifice EFV-550GY Manual

7 April 2025
Casio

Casio EFR-571DB Manual

30 Marts 2025
La Crosse Technology

La Crosse Technology 404-2658-INT Manual

4 Marts 2025
Crane

Crane HO6-CDSM11A Manual

4 Marts 2025
Crane

Crane Analogue Watch 1.0 Manual

4 Marts 2025
Miyota

Miyota 0S10 Manual

1 Marts 2025
Miyota

Miyota 0S1A Manual

1 Marts 2025
Crane

Crane GPS Watch Manual

26 Februar 2025
Adidas

Adidas ADH9002 Manual

15 Januar 2025