Mebus 19422 Manual

Mebus Ur 19422

Læs nedenfor 📖 manual på dansk for Mebus 19422 (2 sider) i kategorien Ur. Denne guide var nyttig for 6 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
Radio-controlled wall
clock with LCD Item no. 19422
Radio-controlled wall clock with LCD Page 1 EN
EN
Thank you for purchasing this radio-controlled wall clock with LCD. Developed and designed with innovative components and techniques, the
device allows you to read the time to the second, the indoor temperature, the date and the day of the week.
Please read the operating instructions carefully before using the appliance to familiarise yourself with its features and functions and keep them in
a safe place.
Commissioning
1. Insert a new battery (1 x 1.5V, type AA/R6) into the battery compartment of the movement. Observe the correct polarity in the battery
compartment. The clock automatically runs to the "12 o'clock" position and stops there. The clock automatically searches for the radio-
controlled clock signal. As soon as this is received, it automatically sets itself to the correct time.
2. Insert a new battery (1 x 1.5V, type AA/R6) into the battery compartment of the LC display. Observe the correct polarity in the battery
compartment. The display starts automatically. The setting can be found below.
Note: 2x AA batteries for the wall clock are not included.
Settings
Movement
RESET
Press and hold the ‘RESET’ button with a pointed object for about 5 seconds. As soon as
you release the button, the watch will restart. The hands turn to the original setting of 12:00
and the radio signal is searched for again. After a successful radio signal search, the
current time is set automatically.
REC
To search for the radio signal again, press and hold the ‘REC’ button for about 3 seconds.
The second hand moves to 12:00 o'clock, the hour and minute hands rotate until the radio
signal found has been recognised.
SET
Press and hold the ‘SET’ button to set the time manually. After about 3 seconds, the hands
start moving and continue to do so for as long as the ‘SET’ button is pressed.
As soon as the button is released, the hands stop at the set time and after about 5 seconds
the time continues to run normally. Manual time setting is only recommended if the item
is out of range of the DCF-77 radio-controlled clock signal and automatic setting does not
work. As soon as the radio signal is within range again and has been successfully received,
the time is automatically adjusted to the second.
LCD
1. Press the button.SET
2. The year starts to flash. Set the desired year by pressing the buttons and confirm your selection by pressing theUP or DOWN SET button.
3. The month starts to flash. Set the desired month by pressing the buttons and confirm your selection by pressing the button.UP or DOWN SET
4. The day starts to flash. Set the desired day by pressing the buttons and confirm your selection by pressing the button.UP or DOWN SET
5. The 12 or 24 hour display mode flashes. Set the desired display mode by pressing the UP or DOWN buttons and confirm your selection by
pressing the button. In Germany, the standard mode is "SET 24 hr".
6. The hours of the time start to flash. Set the desired value by pressing the buttons and confirm your selection by pressing theUP or DOWN SET
button.
7. The minutes of the time start to flash. Set the desired value by pressing the UP or DOWN buttons and confirm your selection by pressing the
SET button.
The basic settings of the LCD are now complete.
Further settings:
You can now switch between the indoor temperature display in °C and °F by briefly pressing button repeatedly.the UP
You can now switch between the date and digital time display by briefly pressing the button repeatedly.DOWN
You can change the language of the displayed day of the week. To do this, press and hold the button for approx. 3 seconds. One of theUP
country abbreviations (= German), (= Italian), (= French), (= Dutch), (= English) now appears instead ofGER ITAFRE DUT SPA(= Spanish), ENG
the day of the week. Now press the button briefly and repeatedly to switch between the languages. Your selection will be savedUP
automatically after approx. 10 seconds without pressing a button. The day of the week then appears again.
Safety instructions
Our appliance has been designed and manufactured in such a way that it will fulfil its purpose satisfactorily for many years if used properly. To
ensure this, please observe the following safety instructions.
Do not expose the device to extreme loads, such as vibrations, extremely high temperatures or extremely high humidity. This could result in
damage to the electronic components or individual components.
Never drop the appliance into water, as this could lead to complete failure of the appliance.
Never use abrasive cleaning agents or corrosive substances. This could cause irreparable damage to the appliance. Scratching plastic parts
or corroding circuits could be the result.
Never open the housing as this will invalidate the warranty.

Produkt Specifikationer

Mærke: Mebus
Kategori: Ur
Model: 19422

Har du brug for hjælp?

Hvis du har brug for hjælp til Mebus 19422 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ur Mebus Manualer

Mebus

Mebus 19422 Manual

30 December 2025
Mebus

Mebus PD1202RC - 41824 Manual

19 August 2024
Mebus

Mebus PD1202RC - 41918 Manual

16 August 2024

Ur Manualer

Nyeste Ur Manualer

Techno Line

Techno Line WT 8000 Manual

5 Januar 2025
AKAI

AKAI ACR-2993 Manual

3 Januar 2025
Techno Line

Techno Line WT 539 Manual

2 Januar 2025
AKAI

AKAI ACR-3088 Manual

1 Januar 2025
AKAI

AKAI ACR-3888 Manual

1 Januar 2025
AKAI

AKAI ACRB-2000 Manual

1 Januar 2025
AKAI

AKAI ACRS-4000 Manual

1 Januar 2025
AKAI

AKAI ACRB-1000 Manual

1 Januar 2025
Ice Watch

Ice Watch Digit Retro Manual

31 December 2025
Ice Watch

Ice Watch Glam Secret Manual

31 December 2025