Monacor AN-2075 Manual


Læs nedenfor 📖 manual på dansk for Monacor AN-2075 (1 sider) i kategorien Højttaler. Denne guide var nyttig for 13 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Compact Array
AN2075
Features
Compact and lightweight, full-range neodymium loudspeakers
Advanced Finite Element Analysis techniques used for acoustic, mechanical
and electromagnetic modelling
Ideal for applications such as portable line arrays where actively
controlled wavefront (beam steering) is used
Delivers wider dispersion to higher frequencies than many equivalent
compact, full-range drivers on the market
Chassis purpose designed for maximum free air movement, with square
mounting frame to facilitate close coupling of multiple units
Sti and light aluminium cone remains rigid to higher frequencies,
delivering a smoother response in the critical listening band
Half roll elastomer surround provides damping for unwanted resonances and
sustained centring control at extremes of excursion
Designed to be weather resistant for outdoor applications
8 Ω Frequency Response
1. Tested for two hours using a continuous, band-limited pink noise signal as per AES standard. Power
calculated on minimum impedance. Loudspeaker tested in free air.
2. Measured on axis at 1W, 1m in 2 anechoic environment.
3. Xmax derived from: (voice coil winding width-gap depth)/2.
General Specications
Nominal diameter 50mm/2in
Power rating 120Wrms
Nominal impedance 8 Ω
Sensitivity 280dB
Frequency range 160Hz-19kHz
Voice coil diameter 20mm/0.75in
Chassis type Glass reinforced ABS
Magnet type Neodymium
Coil material Round Copper
Former material Polyimide
Cone material Aluminium
Surround material Elastomer
Xmax 31.5mm/0.06in
Gap depth 3mm/0.12in
Voice coil winding width 6mm/0.24in
Voice coil material Round Copper
Voice coil former material Polyimide
Bandwidth 200Hz-20kHz
Small Signal Parameters
Sd 12.57cm2/1.94in2
D 40mm/1.57in
Fs 160Hz
Mms 1.37g/0.05oz
Qms 10.12
Qes 1.22
Qts 1.09
Re 5.28 Ω
Vas 0.12lt/0.004ft3
BI 2.60Tm
Cms 0.55mm/N
Mounting Information
Overall depth 43.5mm/1.7in
Overall size 56.2 x 56.2mm/2.2in x 2.2in
Cut-out diameter 51.1mm/2.0in
Fitting 4 x M4 holes
Mounting PCD range Ø62mm/2.45in
Unit weight 97g/3.4oz
Celestion, Claydon Business Park, Great Blakenham, Ipswich, IP6 0NL United Kingdom


Produkt Specifikationer

Mærke: Monacor
Kategori: Højttaler
Model: AN-2075

Har du brug for hjælp?

Hvis du har brug for hjælp til Monacor AN-2075 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler Monacor Manualer

Højttaler Manualer

Nyeste Højttaler Manualer