Muse M-335 TV Manual

Muse TV M-335 TV

Læs nedenfor 📖 manual på dansk for Muse M-335 TV (14 sider) i kategorien TV. Denne guide var nyttig for 22 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/14

R1. POWER ON/OFF button

R2.

ZOOM: To access the zoom

function

R3.

SUBTITLE: To change the

subtitle setting( HDTV mode)

R4. REC: Record button

R5. ◄ ► ▲ ▼, , , : To navigate

through the on-screen menu.

◄: Volume down (during

playback)

: Volume up (during playback)►

ENTER: To conrm the selection.

R6. SETUP: To enter the Setup menu

R7.

FAV: To show your favorite

channel (for HDTV mode)

R8.

TV/RADIO : To switch between

TV and radio channels (for HDTV

mode)

R9.

EXIT

: To exit current menu and

return to previous menu

R10.

DISPLAY: To display the

informaion of current signal.

R11. VOL+/-

: To adjust volume.

R12.

SOURCE: To fast access

USB mode when watching TV

program.

R13. 0…9: Number entry

R14. MUTE: To mute or restore sound.

R15. REPEAT: To select playmode: repeat one, repeat all and random.

R16. MODE: To adjust LCD setup (Brightness, Contrast or Colour) and standby time.

R17. AUDIO: To select different sound mode

R18. : Play /pause

R19. : stop button

R20. Return button

R21.

EPG (Electronic program guide)

: To show the preview of the program picture (for

HDTV mode)

R22. TTX: To turn on / off the teletext information (for HDTV mode)

R23. / : To go to previous or next option.

R24. / : To start reverse or forward accelerated playback.

R25. Color buttons (red, green, yellow, blue

): To activates the function according to

different color shows on the display.

M-335 TV

GB - 1

Please read the instruction carefully

before operating the unit.

LOCATION OF CONTROLS

Main Unit

GB - 2 GB - 3

GB - 6 GB - 7 GB - 8GB - 5

Portable TV

User Manual

REPLACING BATTERY FOR THE REMOTE CONTROL

1. Push the button toward right.

2. Pull the battery loader out.

3. Insert one “CR2025” size battery with the positive side (+) facing up.

4. Replace the cover.

The remote control operates on 1pc “CR2025” lithium battery

(included). To power up the remote control, remove the insulation

tab from the back of unit.

Remote control

GB - 9

GB - 4

Before throwing any batteries away, consult your distributor who may be

able to take them back for specic recycling.

NOTES:

- Never recharge the batteries, apply heat to them or take them apart.

- If the remote control is not going to be used for a long time, remove the battery to avoid

damage caused by battery leakage corrosion.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type.

WARNING

Do not ingest the battery, Chemical Burn Hazard

(The remote control supplied with) This product contains a coin/ button cell battery. If

the coin/ button cell battery is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product and keep it

away from children.

If you think batteries might have been swallowed or placed inside any part of the body,

seek immediate medical attention.

ACCESSORIES

Remote control x1

AC adapter x1

Car plug x1

DVB-T antenna x1

The supplied AC adaptor is suitable for use on AC mains supplies of 100-240V AC and

should only be connected to a mains supply within these parameters.

Cautions:

• The AC adaptor included with this unit is for its use only. Do not use it with other

equipment.

• Turn off the unit before unplugging the AC adaptor from the unit so as to avoid the unit

being damaged.

• When the unit is not going to be used for long time, disconnect the AC adaptor from

the AC outlet.

• Be sure to use it near the wall outlet and easily accessible. If a malfunction occurs,

disconnect the plug from the wall outlet at once.

• AC adaptor is used as the disconnect device. It shall remain readily operable and should

not be obstructed during intended use. To be completely disconnected the apparatus

from supply mains, the AC adaptor of the apparatus shall be disconnected from the

mains socket outlet completely.

• Never use an AC adaptor that is damaged, route power lead in a safe manner and

make sure it is not subjected to trapping or pinching. If the power lead is damaged refer

to a qualied service agent.

POWER SUPPLY

Using the AC adaptor

Using car plug

CONNECTIONS

Disconnect all devices from the main supply before connecting.

1. Connecting external antenna

* Connect with DVB-T antenna (for outdoor reception)

* Connect with 75 ohm transferring antenna cable (for indoor cable TV)

Connect the the 75 ohm antenna cable (not included) to public antenna for TV.

2. Connecting the A/V cable (not included)

Note: AV OUT is only available in HDTV or USB Mode.

3. Connecting to the Amplier

4. HDMI (High Denition Multimedia Interface)

The high denition image and sound can be transferred to the external TV. Use the

HDMI cable (not included ) to connect the portable TV to the external TV which has

HDMI input jack. Select “RAW HDMI ON” under “OPTION” in setup menu on portable

TV. Then enable HDMI input signal on your external TV.

If you connect the DVB-T antenna, set the antenna setting “ON”. While

connect 75ohm transferring antenna, set the antenna setting “OFF”. (Refer

to the “DVB-T SETUP MENU/ Channel Search”.)

USING HEADPHONES / EARPHONES (NOT INCLUDED)

Maximum output voltage ≤ 150mV

HEADPHONE VOLUME WARNING

Connect earphones with the volume set low and increase it if required. Prolonged listening

through some earphones at high volume settings can result in hearing damage. When

headphones/earphones are connected, no sound will be emitted from the unit’s speaker.

Caution: Avoid listening to sound at levels which may be harmful to your ears.

BASIC OPERATION

MODE MENU SETTING

To adjust LCD setup (Brightness, Contrast or Colour) and Standby time, press MODE

button when watching a program (in HDTV mode) or playing audio/video le in USB.

* STANDBY

This function allows you to select the standby setting:

OFF: The unit will not switch to standby mode.

3H (HOURS): If no button is pressed within 3 hours, the unit will switch to standby mode

automatically.

4H (HOURS): If no button is pressed within 4 hours, the unit will switch to standby mode

automatically.

* RESET

To restore the mode menu setting to default setting.

Select “RESET”, then press button.►

FIRST TIME INSTALLATION

After all connections have been made properly, switch on the TV. Slide the ON/OFF

switch to ON position to turn on the unit. If you are using the TV for the rst time or just

restored it to factory default, the Main Menu will appear on your TV screen.

Navigating the setup menu

1. Press to display the setup main menu in HDTV mode.SETUP

2. Press ◄ / ► to select a menu icon.

3. Press ▲/▼ to select one of the available options under a menu icon.

4. Press ► to select an option.

5. Press EXIT to return to menu icon selection, press again to exit from the setup EXIT

menu.

OSD Language

Press ▲/▼ to select [OSD Language] and press ◄ , ► to select an language.

Country

Press ▲/▼ to select [Country] and press ◄ , ► to select your country of residence.

Note: Less or no channel could be received if “Country” setting is incorrect.

Channel Search

Press ▲/▼ to select [Channel Search] and press ► or ENTER to begin Automatic channel

search. Once channel tuning is complete, you are now ready to watch TV.

If no channel is found during the channel searching process, to adjust the antenna position

to obtain optimal TV signal.

Note:

* If installation has been already nished or the program list is not empty, installation

guide may not appear.

* The settings could be modied in DVB-T menu.

DVB-T SETUP MENU

English

WARNING: Disconnect this car power adaptor when not in use. Not for use in

24V vehicles.

Cautions

• Use only the included 12V car power adaptor. Use of any other 12V car power adaptor

could damage the unit.

• The 12V car power adaptor included is for use with this unit only. Do not use it with

any other equipment.

• In the interest of trafc safety, drivers should not operate the unit or view videos while

driving.

• Make sure the unit is fastened correctly to prevent from falling in the vehicle in the

event of an accident.

• When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug

section may become hot due to poor contact. Be sure to clean the cigarette lighter

socket before use.

• After use, disconnect the car power adaptor from both the unit and cigarette lighter socket.

SAFETY WARNING!

On no account should this unit be used by the driver of a moving motor vehicle, or left

unsecured in the vehicle whilst driving. If this unit is being used by a passenger in your

vehicle, be sure that it is secured or held safely, and does not obstruct any safety device

(i.e. airbag, seat belt etc.) that is tted.

Using the Built-in battery

The unit has a built-in rechargeable battery (lithium-ion). Charge the built-in battery before

using it for the rst time. The charging indicator will change from red to green when the

battery becomes fully charged.

Warnings:

• To charge the battery, just connect the AC adaptor.

• Recharge the built-in battery when you are ready to use it again.

• While using the built-in battery, the environmental temperature should be 5°C (41°F)

to 35°C (95°F).

• To get the longest service life of the built-in battery, charge at indoor-temperature.

• The built-in battery in this device may present a risk of re or chemical burn if mistreated.

Do not disassemble, heat above 100°C (212°F), or incinerate.

• The unit should not be exposed to excessive heat such as sunshine, re or the like.

• When discarding the unit, environmental problems must be considered and local rules

or laws governing the disposal of such products must be strictly followed.

• When the built-in battery power is low, “ ” will blink on display.

1. SETUP: To enter the Setup menu.

2. ENTER: To conrm the selection.

3. EXIT: To exit current menu and return

to previous Menu.

4. ▲: Upward

5. ▼: Downward

6. VOL-, ◄: Volume down; leftward.

7. VOL+, ►: Volume up; rightward

8. TFT-LCD display

9. Charging indicator: The charging

light will change from RED to GREEN

when t he b at tery b ec om es f ully

charged.

10. Power ON indicator: When the

unit is switched ON, the light will

illuminate.

11. Remote sensor

12. Antenna socket

13. HDMI jack

14. USB port

15. AV OUT jack

16. COAXIAL jack

17. Earphones jack

18. ON/OFF switch

19. DC IN 9-12V jack

20. Stand

To prevent possible hearing damage, do not listen at high volume

levels for long periods.

Installation Guide

Note: Make sure to use the cable with correct plug.

PTM-3850 IB MUSE 001 REV0 - GB.indd 1 2017/3/31 17:05:46

Produkt Specifikationer

Mærke:	Muse
Kategori:	TV
Model:	M-335 TV
Bredde:	245 mm
Dybde:	24 mm
Højde:	157 mm
Vægt:	280 g
Produktfarve:	Sort
Strøm:	1.5 A
Pakkedybde:	365 mm
Pakkebredde:	205 mm
Pakkehøjde:	49 mm
Skærm diagonal:	10.1 "
Skærmopløsning:	- pixel
USB-port:	Ja
Skærmteknologi:	TFT
Indbyggede højttaler(e):	Ja
Tuner type:	Analog & digital
System for digitalt signalformat:	DVB-T
Antal HDMI-porte:	1
Udgange til hovedtelefoner:	1
Elektronisk programguide (EPG):	Ja
Understøttede videoformater:	MPEG4
Understøttede lydformater:	MP3
Understøttede billedformater:	JPS
Fjernbetjening inkluderet:	Ja
DC-in-stik:	Ja
Strømkilde type:	DC
AC-adapter inkluderet:	Ja
Fjernbetjent:	Ja
Billedformat:	4:3, 16:9
Tilslutning af hovedtelefoner:	3,5 mm
Oprindelsesland:	Kina
Strømforsyningsadapter til bil medfølger:	Ja
AV-udgang:	Ja