Neewer PL81 PRO Manual

Neewer Lys PL81 PRO

Læs nedenfor 📖 manual på dansk for Neewer PL81 PRO (1 sider) i kategorien Lys. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
Use the " " dial to adjust the
brightness of the LED light.
※If your computer's USB port cannot provide sufficient power, the
device will automatically limit the brightness adjustment range
a ording to the max power supported by your USB port. Should this cc
happen, please connect to an alternative port.
Use the " " dial to adjust the
LED light color temperature
2900K ~ 7000K.
EN
Product Overview
Included contents
Product Illustration
USB Charging Cable ×1Silicone Diffuser ×1
Desktop Stand ×1
Storage Pouch ×1
PL81 Pro LED Video Light ×1
01
Installation Instructions
The PL81 Pro conference LED video light is designed with a compact,
simple interface with 90 LEDs. Easy to use, featuring bi-color temperature,
and adjustable brightness. Supplied with a desktop stand for use as a
tabletop LED fill light or mount it on the display of a laptop/computer.
Power button
Brightness Adjustment
Color temperature
Adjustment
1/4" Threaded cold shoe
mount adapter
Type-C Power Supply Port
① Screw the top of the desktop
stand into the screw hole at the
bottom of the LED light and
then tighten the locking ring
to secure.
② The stand can be used flat on a
table by rotating the back cover
of the stand to a suitable angle.
Brightness Indic orat
Cold shoe mount
Cold shoe mount
Cold shoe
mount
1. Installing the light on the desktop stand
EN
02
③ Pull the sliding cover of the stand
upward to the required height
to adjust the height of the LED
light.
⑤ Attach the silicone diffuser to the
front of the LED light in the
direction shown in the image.
The two openings of the soft
diffuser must be aligned with
the two knobs of the LED light.
④ Adjust the pivoting head of the
stand to a suitable angle to adjust
the angle of the LED light.
① Insert the LED light base piece
into the cold shoe of another
LED light, tighten the locking
ring to secure. The two LED lights
can be used in series.
② Insert the LED light base piece
into the camera's hot shoe, turn
the locking ring on the base to
secure onto the camera.
① Rot e the hook of the stand to at
a suitable angle (as shown in
the picture).
② Hang the hook of the stand on
the edge of the computer screen
to use.
EN
04
3. Installing the light on the camera
2. Installing the light on the laptop/computer display.
⑥ After the bracket is placed flat on
the desktop, the phone can be
placed on the back cover of the
bracket.
Notes Specifications
1. Do not place the product in an environment where the temperature is
higher than 40℃.
2. Do not drop the product on the ground, or subject it to collision or strong
impact.
3. Do not look directly into the light when using the product, as this may
cause visual impairment.
4. Do not use the product in the rain or in a humid environment.
5. If the product is not used for a long time, it should be stored in a ventilated,
dry place away from heat sources and magnetic fields.
6. Do not wipe the product with alcohol or liquid on the LED body.
7. Failure to follow the instructions and warning set out in the manual will
void the warranty.
480Lux@0.5m
Model PL81 Pro
Number of LEDs 90PCS
-10℃~40℃
Illuminance 100%(LUX)
CRI 95+
Color Temperature
Operating Temperature
2900K-7000K
Maximum power 5W
5V/2AInput Voltage
Using the product Using the product
PC/MAC Control
Short press the power button to turn
on the power. The indicator light will
show blue. Short press the power
button again to turn the LED light
off and into standby mode.
Insert the Type C end of the USB cable
into the USB-C type port on the light
body. Insert the other end into the
USB port of the computer to use as a
power source. (device will be in
standby with the the power indicator
showing green)
Powering On/Off
EN
03
Power Supply Color Temperature Adjustment
Brightness Adjustment
Indic or Light Display Brightnessat
25%
50%
75%
100%
Scan the QR code below for instructions on how to control the PL81 Pro
from a PC/MAC.
Installation Instructions Installation Instructions


Produkt Specifikationer

Mærke: Neewer
Kategori: Lys
Model: PL81 PRO

Har du brug for hjælp?

Hvis du har brug for hjælp til Neewer PL81 PRO stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Neewer Manualer

Neewer

Neewer NW48 II Manual

4 Februar 2025
Neewer

Neewer PL81 PRO Manual

4 Februar 2025
Neewer

Neewer RM18 Manual

4 Februar 2025
Neewer

Neewer FS300C Manual

4 Februar 2025
Neewer

Neewer FS150C Manual

4 Februar 2025
Neewer

Neewer HS60C Manual

4 Februar 2025
Neewer

Neewer AP150B Manual

11 Januar 2025
Neewer

Neewer TL97C Manual

8 Oktober 2024
Neewer

Neewer RP18B Pro Manual

8 Oktober 2024
Neewer

Neewer RGB62 Manual

9 Juli 2024

Lys Manualer

Nyeste Lys Manualer