Neewer RP18B Pro Manual

Neewer Lys RP18B Pro

Læs nedenfor 📖 manual på dansk for Neewer RP18B Pro (1 sider) i kategorien Lys. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
0706
0908
10
Adjust Brightness/Color Temperature
Notes
Install the Phone Holder
Connect the Remote Control via BluetoothMounting the Ball Head
APP Control
Specifications
Install the Ring Light
Product Diagram
Adjust Brightness:
Turn on the power switch
and rotate the "Brightness
Adjustment Knob" shown
in the diagram to adjust the
brightness, ranging from
0% to 100%.
Adjust Color Temperature:
Turn on the power switch
and rotate the "Color
Temperature Adjustment
Knob" shown in the diagram
to adjust the color
temperature, ranging from
2900K to 7000K.
1. Do not exceed the specified maximum load capacity.
2. Always check that all components are secure when using the product.
3. Never use below -40C or above 100°C. After use in damp/sandy/dusty environments, remember to wipe dry and clean it. Not
recommended for use near seawater.
4. Avoid prolonged exposure to direct sunlight and high temperature environments.
5. Clean with a mild detergent and a soft cloth, removing dust and sand from all locks and moving parts.
6. This device should not require regular lubrication care, however use standard lubricants if needed.
7. For your safety, do not touch any internal components on the product. If they become exposed after the product has been dropped,
do not use the light.
Model
CRI
TLCI
Numbers of LEDs (White)
Numbers of LEDs (Yellow)
Color Temperature
Input Voltage
Power
Maximum Illumination
Communication Range
Dimensions
RP18B Pro
97+
98
160 pcs
160 pcs
2900-7000 K
DC 15V/4A
45W
3300lux / 0.5m
20m
480×565×62.5 mm
Twist the leg adjustment
knob counterclockwise to
loosen it, and then expand
the tripod legs outward to
the desired angle. Afterward,
tighten the knob clockwise
to secure it.
① Cold Shoe Locking Ring
② Flexible Tube Arm
③ Phone Holder
Insert the base into the cold
shoe mount on the ring light.
Rotate the cold shoe locking
ring clockwise until it locks
in place to secure the phone
holder.
The phone holder can be
manually expanded on both
sides to accommodate
different phone sizes.
Insert the top of the tripod
into the bracket and rotate
the indicated knob clockwise
until it locks securely.
Rotate the light head
tightening counterclockwise
to loosen it, and then adjust
the angle.
Once the desired angle is set,
tighten the knob as shown
clockwise to lock the position.
Turn on the remote control.
Connect your phone to the
Bluetooth device named
"Neewer-Shutter."
Enable the phone's camera
function, and simply press
the remote control button
to take a photo.
If the indicator light on the remote control is not lit, check if the battery cover is loose or replace the batteries.
Power Port
Cold Shoe Mount
Stand Tighten Knob
Power ON/OFF Switch
Light Tightening Knob
Power Indicator Light Brightness
Adjustment Knob
Color Temperature
Adjustment Knob
04 05
Product Overview
Package Contents
1 x Ultra Slim Ring Light
1 x Carrying Case
1 x Folding Stand
1 x User Manual
1 x Adapter 1 x Power Cable
1 x Phone Holder with
Flexible Tube Arm
1 x Bluetooth
Remote Control
- The ultra slim RP18B PRO ring light features a full plastic body with high strength and all metal load bearing components,
ensuring a lightweight yet sturdy construction.
- Versatile and well-suited for various uses, such as live streaming, photography, clinics, makeup applications, and more.
- Can be controlled via Bluetooth with a mobile app, and also supports Bluetooth interaction with a computer.
- Comes with a tripod and phone clip, and is equipped with a cold shoe mount for expanded functionality.
Connect your phone via Bluetooth and control the LED light using the "NEEWER" app.
(To learn more about using with the app, scan the QR code on the "APP Prompt Card"
to access the app guide page.
* 0-100% brightness: Indicator lights on when Bluetooth is connected.
* 1-100% brightness: Indicator stays off when Bluetooth is not connected.
* 0% brightness: Indicator flashes when Bluetooth is not connected.
EN EN
EN EN
ENEN
EN
① Ball Head Locking Knob
② 1/4" Screw
③ Device Locking Knob
④ Metal Ball Head
⑤ Cold Shoe Locking Knob
⑥ Cold Shoe
Align the 1/4" screw on the
ball head with the 1/4"
threaded hole on the device
and tighten them clockwise.
Turn the "Device Locking
Knob" clockwise until it
securely locks the device in
place.
Attach the ball head and
device to the cold shoe
mount on the ring light,
then rotate the "Cold Shoe
Locking Knob" clockwise
until it is firmly secured to
the ring light.
To adjust the angle of the ball
head and the device, loosen
the "Ball Head Locking Knob"
counterclockwise (adjustable
by 360 degrees)
1 x Ball Head
Note: The speed at which you turn the knobs will affect the speed at which the brightness/color temperature changes.


Produkt Specifikationer

Mærke: Neewer
Kategori: Lys
Model: RP18B Pro

Har du brug for hjælp?

Hvis du har brug for hjælp til Neewer RP18B Pro stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Neewer Manualer

Neewer

Neewer TL97C Manual

8 Oktober 2024
Neewer

Neewer RP18B Pro Manual

8 Oktober 2024
Neewer

Neewer RGB62 Manual

9 Juli 2024
Neewer

Neewer RGB1200 Manual

12 Juni 2024
Neewer

Neewer SL90 Manual

12 Juni 2024
Neewer

Neewer RP12-H Manual

12 Juni 2024
Neewer

Neewer ZC-10S Manual

12 Juni 2024
Neewer

Neewer RP18H Manual

12 Juni 2024
Neewer

Neewer PL60C Manual

12 Juni 2024

Lys Manualer

Nyeste Lys Manualer