Neewer X12 II Manual

Neewer Ikke kategoriseret X12 II

Læs nedenfor 📖 manual på dansk for Neewer X12 II (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF
Side 1/2
EN
EN
EN
About this product
Package Contents
Product Illustration Product Illustration
Remote Control ×1
Soft Cleaning Cloth ×1
X12 II Teleprompter ×1
01
How to Install
How to Install
02
EN
04
How to Install How to Install How to Install How to Use
03
Neewer's X12 II teleprompter contains a high-definition display to present
texts and a special coated glass positioned at a 45°angle in front of your
camera to reflect the texts onto the display so that speakers can clearly
read the script and look natural when facing the camera.
Fully unfold the teleprompter's
blackout shade and zip it up on
both sides. Please ensure the
sides are fully sealed all around
to avoid light leaking through.
Remove the teleprompter from its
packaging and remove the protective
layer of film on the glass before use.
①
Beam Splitter
Mirror Glass
Cold Shoe Slot
Display Holding Tray
Tray Securing Knob
Quick Release Plate
Cold Shoe Slot
Height
Adjustment
Knob
QR Plate Button
Base
Locking
Knob
Blackout shade
Camera
Safety Lock
Holding Base
Cold Shoe Slot
Beam Splitter
Glass Lock
Unfold the blackout shade
Push Safety Lock up and press
QR Plate Button to release
QR plate.
Remove the quick release plate
Insert the quick release plate screw
into your camera's bottom screw
hole and tighten it.
Attaching the entire quick release
plate to your camera
Put QR plate inside the clamp and
push Safety Lock down.
Re-inserting the quick release plate
back into the base
Placing tablet or cellphone devices
to play texts
Insert the top screw of your tripod
into the teleprompter's bottom hole,
ensuring a good fit, and tighten the
tripod's knob to secure (drop and
lock system).
Place the teleprompter on a tripod
Remove the protective layer of film
Loosen the Tray Securing Knob by
turning it counterclockwise, then pull
the tray to extend and accomodate
your tablet or cell phone. After
inserting your tablet or phone used
to play texts on the tray, push the tray
a little bit inward to secure your device
and finally rotate the Tray Securing
Knob clockwise to tighten.
Adjusting the camera position
Rotate the Holding Base Lock to loosen.
This will enable you to slide the Camera
Holding Base back and forth on the tray
in order to adjust your camera to the
required position. Tighten the Holding
Base Lock to secure.
How to store after use
After use, please fold the
teleprompter's shade and gently put
down the Beam Splitter Glass as
shown in the image.
②
※
Loosen the Height Adjustment Knob,
move the Camera Holding Base up or
down to set your camera at the
required height and tighten the knob.
③After your camera is secure in
position, please make sure the lens
is fully covered by the blackout
shade. Pull on the tether to ensure
there isn't any light leakage.
When adjusting your camera's position,
please ensure that the glass, tray and
other teleprompter parts aren't visible
in your camera's viewfinder.
Adjust the angle of the beamsplitter
Turn the knob shown in the image
anti-clockwise to adjust the angle
of the beamsplitter glass to 45°.
Secure in place by turning the
same knob clockwise.
EN
How to Use
05
Status Indicator
【Long Press】Turn on/off
Remote Control: Model RT113
【Short Press】Play/Pause 【Short Press】
Slow down (when playing);
Page up (when paused)
【Short Press】
Speed up (when playing);
Page down (when paused)
Note
(1) The teleprompter has fragile components and should be handled
carefully to avoid accidentally dropping or subjecting it to physical
impact.
(2) Please do not try to dismantle the product. Should you notice a defect,
please contact Neewer Customer Service or maintenance staff
authorized by Neewer to repair.
Specifications
Model
Size
Material Material Aluminum alloy+specialized coating glass
Download and install the APP for the teleprompter
Scan the QR code above (respectively for iOS and Android) with your
phone or tablet to download and install the APP for the teleprompter.
Connect your phone or tablet to the remote via the APP
① Long press the " " button to turn on the remote. A blue indicator will
flash on the screen.
② Activate the Bluetooth on your phone or tablet, log in the teleprompter
APP, search for the Bluetooth signal "NEEWER RT113", and select to
connect with the remote.
iOS Android
※Adjust the camera bracket to its initial
height and move it to the base end
before laying the beamsplitter flat
to prevent cracking.
X12 II
355*285*115 mm

Produkt Specifikationer

Mærke: Neewer
Kategori: Ikke kategoriseret
Model: X12 II

Har du brug for hjælp?

Hvis du har brug for hjælp til Neewer X12 II stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Neewer Manualer

Neewer

Neewer QR Manual

8 Oktober 2024
Neewer

Neewer X14 III Manual

7 Oktober 2024
Neewer

Neewer X12 II Manual

24 September 2024
Neewer

Neewer ST83 Manual

5 September 2024
Neewer

Neewer SP-02 Manual

5 September 2024
Neewer

Neewer NK-ST0203 Manual

4 September 2024
Neewer

Neewer QPRO-S Manual

3 September 2024
Neewer

Neewer PG001 Manual

3 September 2024
Neewer

Neewer SR101 Manual

3 September 2024
Neewer

Neewer ST46 Manual

3 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Panduit

Panduit FPONE1 Manual

14 November 2024
Panduit

Panduit FPONE4 Manual

14 November 2024
Garmin

Garmin dēzl Headset 210 Manual

14 November 2024
Klipsch

Klipsch KI-172-SMA-II Manual

14 November 2024
Auray

Auray ABP-35N Manual

14 November 2024
Auray

Auray CFP-68R Manual

14 November 2024
Royal Catering

Royal Catering RCBM_GN1/2_2 Manual

13 November 2024
Cateye

Cateye AMPP100 Manual

13 November 2024
Cateye

Cateye HL-EL450 Manual

13 November 2024
Cateye

Cateye AMPP200 Manual

13 November 2024