Nelson R55i Manual

Nelson Vandingskontrol R55i

Læs nedenfor 📖 manual på dansk for Nelson R55i (2 sider) i kategorien Vandingskontrol. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

R55i Gray Sprinkler with 1000P Valve

End of Pivot Plumbing Conﬁguration

R55/R75 + 1000P CONFIG. 10/2/17

Allowable pipe lengths

for R55i Gray sprinkler

with 1000 Series End of

Pivot Valves with METAL

connections.

Valve Models:

1000P-R

1000P-X

1000P-RX

Max = 12”

Min = 6”

Max = 24”

Max = 12”

Min = 6”

WARRANTY AND DISCLAIMER: Nelson Irrigation’s R55 and R75 End of Pivot Sprinklers and 1000 Series Valves are warranted for one year from date of original sale to

be free of defective materials and workmanship when used within the working specications for which the products were designed and under normal use and service. The

manufacturer assumes no responsibility for installation, removal or unauthorized repair of defective parts. The manufacturer’s liability under this warranty is limited solely to

replacement or repair of defective parts and the manufacturer will not be liable for any crop or other consequential damages resulting from defects or breach of warranty. THIS

WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS

FOR PARTICULAR PURPOSES AND OF ALL OTHER OBLIGATIONS OR LIABILITIES OF MANUFACTURER. No agent, employee or representative of the manufacturer

has authority to waive, alter or add to the provisions of this warranty, nor to make any representations or warranty not contained herein. This sprinkler may be covered

by one or more of the following U.S. Patent Numbers and other U.S. Patents pending or corresponding issued or pending foreign patents.6,814,305 and 6,827,291

Allowable pipe lengths for

R55i Gray sprinkler with

1000 Series End of Pivot

Valves with PLASTIC

connections

Valve Models:

1000P-R

1000P-X

1000P-RX

Max = 6” Max = 6”

Min = 6”

Max = 12”