Nitecore MT2A Manual


Læs nedenfor 📖 manual på dansk for Nitecore MT2A (1 sider) i kategorien Lommelygte. Denne guide var nyttig for 7 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
®
User Manual
Features
LED Premium CREE XP-G R5 LED
Maximum output of up to 280 lumens
High efficiency current circuit board
Maximum runtime of up to 50 hours
Two rapid switching modes suit various user requirements.
User-defined mode allows for customized brightness levels and a
multitude of functions
Intelligent memory functions
Anti-rolling design
Reverse polarity protection
Toughened ultra-clear mineral glass with anti-reflective coating
Aluminum reflector ensures a smooth and powerful beam
Aero grade aluminum alloy
HA III Military grade hard anodized
Detachable two-way anti-rolling clip
Purpose-made rhombic knurling for better grip
IPX-8 standard waterproof (submersible to two meters)
Dimensions
Length: 155mm (6.1)
Head Diameter: 22.56mm (0.92)
Tail Diameter: 21.5mm (0.85”)
Weight: 67grams (2.36oz)(without battery)
Thanks for purchasing NITECORE!
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1407-08, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Brightness & Runtime
ALL-ROUND Flashlight Expert
Accessories
Clip, lanyard, spare plastic cap,
and spare O-ring
Battery Options
Please follow our facebook for more info: NITECORE Flashlights
Operation instructions
Battery installation (as the picture shows)
1. Unscrew the tail cap in a counter-clockwise direction.
2. Insert two AA batteries with the positive pole pointing forward (toward the
light head).
Switching ON/OFF
Switch ON: Press the button on the tailcap until a “clickis heard.
Switch OFF: Press the button at the tailcap until a second time until aclick” is
heard.
Mode Switching
The Nitecore MT2A has two modes: Turbo and user-defined. These two modes
can be changed by simply tightening and loosening the flashlight head. Turbo
provides 100% output while user-defined users contains five selectable
sub-modes.
Turbo Mode
Turbo mode is accessed when the MT2A flashlight is switched ON and the
head lightly tightened. While in this mode, momentary illumination can be
achieved by switching off the flashlight and then half pressing and holding the
switch. Momentary illumination can be used as a flashing signal indicator or
apply to various tactical applications.
Note: After three minutes using of turbo mode, the flashlight will lower its
output automatically for preventing overheating, and efficiently ensure the
battery runtime.
User-Defined Mode
User-defined mode is accessed by slightly loosening the flashlight head. In this
mode, lightly and rapidly pressing the switch will cycle through brightness and
other functions in the following order: “High-Mid-Low- SOS-Strobe. Pressing
the switch all the way down will save and memorize a desired setting.
Tips: Make NITECORE MT2A your perfect multi-task flashlight.
NITECORE MT2A flashlights essentially have two modes: Turbo mode (100%
output) and custom mode. Turbo mode is accessed by tightening the flashlight
head while any of one of the four customizable modes (strobe, low, medium
and high) are selected by loosening the head and rapidly pressing the on/off
switch to cycle through the modes. A given mode can be saved by simply turn
off the light while in that mode. Real-world examples include: When used as a
flashlight around the home, the head can be loosened and low level selected in
custom mode, providing long runtimes at a lower light intensity. The same
flashlight could then be taken out and used a law-enforcement duty light, with
user-defined mode set in strobe, making it easy to alternate between turbo
mode and strobe with a simple twist of the flashlight head.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin
coating of silicon-based lubricant.
Warranty Service
All NITECORE ® products are warranted for quality. DOA / defective products
can be exchanged for replacement though a local distributor/dealer within the
14 days of purchase. After 14 days, all defective / malfunctioning NITECORE®
products will be repaired free of charge for a period of 18 months from the date
of purchase. After 18 months, a limited warranty applies, covering the cost of
labor and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE ® products and services, please
contact your national NITECORE ® distributor or send an email to
service@nitecore.com
TURBO HIGH MID LOW
LUMENS
125
LUMENS
280
LUMENS
50
LUMENS
15
2
h
15
min
5
h
12
h
50
h
115m (Beam Distance)
3300cd (Peak Beam Intensity)
IPX-8, 2m
(Waterproof AND Submersible)
1.5m (Impact Resistant)
SIZE
Nominal voltage
Compatible
Primary AA battery AA 1.5V Y (Recommended)
Rechargeable AA battery AA 1.2V Y (Recommended)
Primary AA Lithium battery L91 1.5V Y (Recommended)
Primary FeLiPO4 battery 14500 3.2V N (Banned)
Rechargeable Li-ion battery 14500 3.7V N (Banned)
NOTICE
Stated data has been
measured according to
the international
flashlight testing
standards ANSI/NEMA
FL1 using two high
quality AA Ni-Mh
rechargeable batteries
(1.2V, 2400mAh) under
laboratory conditions.
The data may vary due
to individual usage
habits and environmental
conditions.
WARNING
Ensure batteries are
inserted with the
positive (+) end
pointing to the head.
The MT2A will not
operate with incorrectly
inserted batteries.
NITECORE (SYSMAX) is a member of PLATO, participating in and helping to develop
the ANSI FL1 standard of measurement. Product testing data is in accordance with
these internationally recognized scientific standards.


Produkt Specifikationer

Mærke: Nitecore
Kategori: Lommelygte
Model: MT2A

Har du brug for hjælp?

Hvis du har brug for hjælp til Nitecore MT2A stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lommelygte Nitecore Manualer

Nitecore

Nitecore MH40 Pro Manual

6 September 2024
Nitecore

Nitecore HU2000 Manual

6 September 2024
Nitecore

Nitecore EDC27 UHi Manual

4 September 2024
Nitecore

Nitecore MT1C Pro Manual

4 September 2024
Nitecore

Nitecore MT2C Pro Manual

3 September 2024
Nitecore

Nitecore TM9K Pro Manual

2 September 2024
Nitecore

Nitecore EDC25 Manual

2 September 2024
Nitecore

Nitecore NU45 Manual

2 September 2024
Nitecore

Nitecore TUBE UV Manual

2 September 2024
Nitecore

Nitecore TUBE V2.0 Manual

2 September 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer

Fenix

Fenix E09R Manual

17 November 2024
Ledlenser

Ledlenser AL10R Work Manual

11 November 2024
Varta

Varta 17631 Manual

7 Oktober 2024
Varta

Varta 18803 Manual

3 Oktober 2024
Led Lenser

Led Lenser D14 Manual

1 Oktober 2024
Led Lenser

Led Lenser L5 Manual

1 Oktober 2024
Brennenstuhl

Brennenstuhl TL 1201 AF Manual

30 September 2024
Brennenstuhl

Brennenstuhl TL 601 AF Manual

30 September 2024