Nitecore R25 Manual


Læs nedenfor 📖 manual på dansk for Nitecore R25 (1 sider) i kategorien Lommelygte. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/1
®
User Manual
Features
Premium CREE XP-L HI V3 LED
Crystal Coating Technology combined withPrecision Digital Optics Technology” for extreme reflector
performance
Dual-switch tail cap designed for tactical use and easy application
Powered by a dedicated 18650 rechargeable Li-ion battery
Charged with a stable, efficient dedicated charging dock
Maximum output up to 800 lumens
Boasts a peak beam intensity of 25,800cd and a throw distance up to 321 meters
Highly efficient circuit offers up to 15 hours of use
Three selectable modes brings flexibility in operation
STROBE READYTM button for quick access to Strobe (Chinese patent No.201320545349.4)
Integrated LEDs on tail switch to indicate remaining battery power (Chinese patent No.
ZL201220057767.4)
Anti-rolling design to provide a firm grip
Two-way titanium steel clip included
Toughened ultra-clear mineral glass with anti-scratch coating
Constructed from aero grade aluminum alloy with HAIII military grade hard-anodized finish
Waterproof in accordance with IPX-8 (two meters submersible)
Impact resistant to 1.5 meters
Dimensions
Length: 5.55(141mm)
Head diameter: 1.25(31.8mm)
Tail diameter: 1” (25.4mm)
Weight: 3.81oz (108.1g, without battery)
Dock size: 3.34” x 2.6”x 2.3(84.8mm x 66mm x 58.5mm)
Dock weight: 3.05oz (86.4g, without adapter)
*R25 NL188DW dedicated batteries are available for purchase.
Battery Options
Brightness & Runtime
Thanks for purchasing NITECORE!
The All-Round Flashlight Expert
Operation instructions
Battery installation
Install one 18650 Li-ion battery or two CR123 Li-ion
batteries with the positive pole pointing forward
(toward the bezel).
NOTE: Integrated LEDs within the tail switch will
blink to indicate remaining battery power after
battery installation. Please refer to Power Tips for
more information.
through all three brightness levels.
NOTE: When in medium and high mode, the R25 will reduce output luminance automatically after 3
minutes of use to prevent battery overheating and extend battery longevity.
To select a desired mode:
1. Ensure the R25 is switched off.
2. Loosen the head bezel.
3. Press and hold the STROBE READY
TM button on the tailcap while simultaneously tightening the
bezel.
4. Once the bezel has been tightened, the R25 will indicate a mode has been selected by flashing once
for Tactical Mode, twice for Law Enforcement Mode or three times for General Mode.
5. To cycle through all three modes, simply repeat the above procedures.
Strobe Ready
1. With batteries loaded and the light off, press and hold STROBE READY™ button on the tailcap to
enter Strobe mode, release to exit.
2. With the light on in Tactical Mode, press STROBE READYbutton on the tailcap to enter Strobe
mode. To exit, simply press STROBE READY
TM button again or switch the light off.
3. With the light on in Law Enforcement Mode or General Mode, press and hold STROBE READY™
button on the tailcap for more than 0.5 second to enter strobe mode. To exit, simply press STROBE
READYTM button again.
4. General mode provides an intelligent memory function to ensure direct access to the current Strobe
mode when reactivated.
Using Charging Dock
The R25 is capable of charging with a charging dock. You can fix the dock on a wall with screws.
Before charging, secure the flashlight to the dock. Turn the flashlight to align the charging pins on the
flashlight’s head to that on the dock. Connect the charging to a wall charger or a car adapter via its
charging cable.
1. Charging voltage is 5V, charging current 500mA.
2. The included car charger cord can only be used with 12V car charger.
Power Tips
Upon battery installation, the red power indicator LEDs in the tail switch will blink to indicate battery
power:
1. Three blinks indicate power levels above 50%;
2. Two blinks indicate power levels below 50%;
3. One blink indicates power levels below 10%.
Note: The power indication is set to be activated after 20 seconds of power cutoff. To inspect battery
power, please loosen the tail cap, wait 20 seconds and re-tighten it.
Changing / Charging Battery
Batteries should be replaced or recharged when output appears to be dim or the flashlight becomes
unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based
lubricant.
Warranty Details
Our authorized dealers and distributors are responsible for warranty service. Should any problem
covered under warranty occurs, customers can contact their dealers or distributors in regards to their
warranty claims, as long as the product was purchased from an authorized dealer or distributor.
NITECORE’s Warranty is provided only for products purchased from an authorized source. This applies
to all NITECORE products.
Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer
within the 15 days of purchase. After 15 days, all defective / malfunctioning NITECOR products can
be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60
months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the
cost of accessories or replacement parts.
The warranty is nullified if the product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties, or damaged by batteries leakage.
For the latest information on NITECORE® products and services, please contact a local NITECOR
distributor or send an email to service@nitecore.com.
All images, text and statements specified herein this user manual are for reference purpose only.
Should any discrepancy occurs between this manual and information specified on www.nitecore.com.
Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at
any time without prior notice.
NOTE
The above data has been
measured in accordance with
the international flashlight
testing standards ANSI/NEMA
FL1 using 1x Nitecore
NL188DW (3.7V, 3200mAh,
dedicated to R25) battery or 2x
CR123 (3V, 1700mAh) batteries
under laboratory conditions. The
data may vary slightly during
real-world use due to battery
type, individual usage habits
and environmental factors.
R25
SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX: +86-20-83882723
E-mail: info@nitecore.com
Web: www.nitecore.com
Address Rm1401-03, Glorious Tower, 850 East Dongfeng Road,
Guangzhou, China 510600
Please find us on facebook:
NITECORE Flashlights
Tactical Momentary Illumination
Press the tail switch partway down to turn on the flashlight, and release to turn it off.
Mode Selection
The R25 offers three different modes of illumination for different users and situations.
Mode 1-Tactical Mode: this mode only provides high output, and is ideal for self-defense,
emergencies and tactical operations.
Mode 2-Law Enforcement Mode: this mode provides two brightness levels: medium and high. This
mode is designed for law enforcement officers and patrol guards.
Mode 3-General Mode (default mode for first time use): this mode provides three brightness levels:
low, medium and high. With the light on, press the STROBE READY™ button on the tail to cycle
20160812
Accessories
Included: NL188DW dedicated battery (for
R25 only), R25 charging dock, charging
dock adapter, car charger, quality holster,
clip, tactical ring, lanyard, and spare O-ring
Optional: holster NTH30B, holster NCP30,
remote switch RSW2, tactical lanyard
NTL10/NTL20
CR123 3V
NL18650DW rechargeable lithium battery
18650
18650
3.7V
3.7V
RCR123 3.7V
TYPE
Nominal voltage
Compatible
18650 Rechargeable Li-ion battery
Primary Lithium battery *
Rechargeable Li-ion battery *
Yes (Recommended and
can be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
Yes (Compatible but can
NOT be recharged)
*Warning: The charging dock can only charge an R25 with dedicated NL188DW battery. Do not
charge ordinary 18650, CR123 or RCR123 batteries with the charging dock.
1
h
9
h
12
h
800
25,800cd
(Peak Beam Intensity)
321
m (Beam Distance)
1.5
m (Impact Resistant)
230 12050
3
h min30
5
h min30
2×CR1231×18650
45min
15
h
11
h
HIGH(Mode 1,2,3)MID(
Mode 3)MID (Mode 2)LOW (
Mode 3)
LUMENS LUMENS LUMENS LUMENS
IPX-8, 2m
(Waterproof AND Submersible)
3. When abnormal charging situations are detected (such as
non-rechargeable battery inserted, battery polarity reversed or
no battery inserted at all), the R25 will automatically stop
charging, and alert the user with blue LED blinks.
4. During charging, the blue indicator LED blinks every 1.5
seconds; upon charging completion, the R25 automatically
stops charging, and the blue LED goes constantly on.
5. The R25 charging dock can only charge an R25 with an
NL188DW dedicated battery. Do not charge an R25 on the
charging dock with ordinary 18650, CR123 or RCR123
batteries.
NL188DW


Produkt Specifikationer

Mærke: Nitecore
Kategori: Lommelygte
Model: R25

Har du brug for hjælp?

Hvis du har brug for hjælp til Nitecore R25 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lommelygte Nitecore Manualer

Nitecore

Nitecore MH40 Pro Manual

6 September 2024
Nitecore

Nitecore HU2000 Manual

6 September 2024
Nitecore

Nitecore EDC27 UHi Manual

4 September 2024
Nitecore

Nitecore MT1C Pro Manual

4 September 2024
Nitecore

Nitecore MT2C Pro Manual

3 September 2024
Nitecore

Nitecore TM9K Pro Manual

2 September 2024
Nitecore

Nitecore EDC25 Manual

2 September 2024
Nitecore

Nitecore NU45 Manual

2 September 2024
Nitecore

Nitecore TUBE UV Manual

2 September 2024
Nitecore

Nitecore TUBE V2.0 Manual

2 September 2024

Lommelygte Manualer

Nyeste Lommelygte Manualer

Fenix

Fenix E09R Manual

17 November 2024
Ledlenser

Ledlenser AL10R Work Manual

11 November 2024
Varta

Varta 17631 Manual

7 Oktober 2024
Varta

Varta 18803 Manual

3 Oktober 2024
Led Lenser

Led Lenser D14 Manual

1 Oktober 2024
Led Lenser

Led Lenser L5 Manual

1 Oktober 2024
Brennenstuhl

Brennenstuhl TL 1201 AF Manual

30 September 2024
Brennenstuhl

Brennenstuhl TL 601 AF Manual

30 September 2024