Olympia HT 430-22 Manual

Olympia Ikke kategoriseret HT 430-22

Læs nedenfor 📖 manual på dansk for Olympia HT 430-22 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

User Manual

HT 430-22

Programmable energy-saving radiator

ID: 73024

User manual

Please read the user manual before you

place the thermostat. Keep the

documents for later questions and

provide them if you pass the thermostat

on to other persons.

Scope of delivery

1 HT 0- energy saving radiator 43 22

thermostat

1 User manual

1 Connector

3 Adapters (Danfoss RA, Danfoss RAV,

Danfoss RAVL)

2 batteries (mignon, AA)

Application as directed

By purchasing the HT 0- energy saving 43 22

radiator thermostat you own a programmable

radiator thermostat which can be used for

temperature regulations in enclosed rooms

and therefore, it can contribute to the

reduction of heating energy. Please use the –

thermostat only for this purpose. The

programming port is intended ONLY for our

programming stick. Never connect other

devices with the programming port!

The Programming stick can be found on:

www.addliving.com

Set up menu

By pressing

MENU,

you will arrive at the

set up menu. Please choose one of the

items with the selector wheel. With

you can select one menu item and with

the selection wheel they can be adjusted.

The button

confirms the setting. The

button

leads to the previous level.

MODE Select the mode

AUTO = automatic mode

MANU = manual mode

PROG S

etting of time

program

TEMP S

etting of comfort and economy

temperature

ZEIT Setting of date and time

FENS Window function

RES Reset of the device to factory

preset

ADAP Starting a new adaptation of to

adjust the valve

URLA T

ravel function

INST I

nstallation function (Please only

attach the controller to

the coupling ring in

this position)

OFFS A

daptation of temperature to the

room situation

STBY Standby mode

VERS version

DST Daylight saving time

Display and control elements

Union nut

Heating times

AUTO or MANU mode

Opens the main menu –

(starting from the standard display);

within a menu, navigate one step

back by pressing the button

OK –

Confirm

TIME Timer function –

Adjusting wheel

Key lock

Battery low

Vacation function

Comfort temperature

Energy-save temp.

Frost protection functio

Battery

compartment

USB-Port

Inserting / replacing batteries

Remove the battery lid by pressing the

battery lid upwards (1) at the highlighted

point and then taking it out (2).

(2)

Then insert the batteries as represented in the

appliance.

Do not use accumulators! Ensure

that the polarity is correct!

Safety information regarding handling

batteries

Warning! Risk of suffocation through

batteries.

• Keep batteries out of reach of children.

• Seek medical attention immediately if

one is swallowed.

Caution! There are different risks involved

when dealing with batteries.

• Never attempt to recharge standard

batteries, never short circuit batteries

and/or open batteries. Doing so leads to a

potential risk of overheating, fire or

explosion.

• Improper handling of

batteries/rechargeable batteries can

endanger your health and the

environment. Batteries/rechargeable

batteries may contain toxic and

environmentally harmful heavy metals

(Cd = cadmium, Hg = mercury, Pb = lead).

Therefore, hand in used batteries at a

municipal collection point. Therefore,

separate disposal and recycling of spent

batteries is essential for the environment

and health.

• Ensure the connection terminals are not

short-circuited.

• Never throw batteries into a fire or

water.

• Never expose batteries to any

mechanical loads.

• Leaking batteries could cause damage to

the device. If a battery should start to leak,

remove it from the device immediately to

prevent any further damage. Take the

utmost care when handling damaged or

leaking batteries and always wear

protective gloves.

• Avoid any contact with the skin, eyes,

and mucous membranes. Rinse any parts

of the body which have encounter battery

acid with plenty of clean water and

contact a doctor immediately. Avoid

extreme conditions and temperatures

which could affect the batteries, e.g. by

placing them on radiators or exposing

them to direct sunlight.

• Only use batteries of the type specified.

• Never use batteries of different types or

new and old batteries together.

• Ensure batteries are inserted with the

correct polarity.

• If the device will not be used for a longer

period, switch the device off and remove

the batteries.

• Remove empty batteries from the

device and dispose of them according to

the applicable directives.

• The batteries must be removed from the

device before its disposal.

• You are legally obliged to dispose of

batteries at your dealer or at the collection

points provided by the responsible waste

disposal authority.

Setting date and time

After inserting the batteries for the first

time the date will flash on the display.

Now, date and time can be set .

Set date with the selector wheel. Confirm

with

Set month with the selector wheel.

Confirm with

Set day with the selector wheel. Confirm

with

Set hour with the selector wheel. Confirm

with

Set minute with the selector wheel.

Confirm with

– That’s it.

On the display

PREP

. will be shown. Now, the

motor will completely move to the installation

position make the installation easier. As to

soon as HT 430 22- is ready for installation. INST

will be shown on the display (

INST

- any time

selected in the menu). Now please do not press

any other buttons! Plug device coupling for

ring.

→

see mounting.

The HT 430-22 automatically switches to

daylight saving time.

You can also set date and time via the

menu item later on. But in case of that, HT

430 22- does not move to the installation

position.

→

In case of replacing batteries, the

stored time programme will remain

active. You should check the specifi ed

time to ensure that.

Mounting

HT 2000 can be quickly and easily mounted on all

common valves (see adapter table). It can be

installed without grime and water spots because

the heating circuit is not interrupted.

Turn the manual thermostat head up

completely, loosen the

fastening and pull the thermostat off

the valve.

Use an appropriate adapter, if required,

and push it onto the valve.

Screw the connector on the valve or the

adapter.

Now, you put HT 2000 on the connector

until it noticeably clicks into place.

ATTENTION

: It must be possible to insert the

device without applying force, ensure that the

appliance is in the

INST

EIN

position.

→

In case of a later installation, please

switch in the menu to

INST

before you

install the device. Herewith the

installation is facilitated. Only mount it in

this position.

Dismounting

To remove HT - remove this at the 430 22,

EIN

(with the wheel turn on the highest

temperature of over 28 C° to

EIN

position),

wait for a short period and unscrew the

cap nut and remove the device from the

valve.

Adaptation

Initial installation: Press the button OK

until ADAP appears on the display so that

HT - will be able to start its 430 22

adaptation. The device will adapt itself to

the stroke of your valve body. To do this

the valve will now be opened and closed

several times to store the end points. In

some cases, this process can take a few

minutes. After successful adaptation it

returns to normal mode.

Should adaptation become necessary

again, e.g., if your radiator does not cool

down in the -Position, please press in

the menu the button until adaptation

starts again.

If the mistake is shown on the display

place HT 2000 onto the radiator valve

and then take the batteries out for a

short time execute a reset. to

Adapter

Heimeier,

Junkers

Landys+Gyr,

MNG, Honeywell,

Braukmann

Gewindemaß

von M 30x1,5

No adapter

required.

Danfoss RAV

(

accompanying pin

must be

plugged on

the valve tapped)

Danfoss RA

Danfoss RAVL

NOTE: Use the enclosed letter and nut

with Danfoss RA/RAV.

Please remove the marked connecting rods

completely before mounting the adapters!

Basic operating modes

MANU-Modus

In the MANU-mode HT 430- adjusts to the 22

manually speciﬁed temperature.

AUTO-Modus

In the AUTO-mode HT - changes 430 22

between to temperatures according to

the time program that has been set:

Comfort temperature

(factory preset

21°C)

Economy temperature

(factory preset

16°C)

The heating and economy times can be

specified via the

adjustable time

program

. It is

possible to set 8 switch points (4

heating and 4

economy times) per day at the most. HT

430-

has the

following factory preset:

Heating time:

Heating with comfort temperature

(factory

preset:

1st heating time at 07:00)

Economy time:

owering to economy temperature

(factory

preset:

1st economy time at 22:00)

Setting heating and economy times:

With HT

430 22-

it is possible to set 4 heating

and 4 economy times per

day one for each –

day or one for a block of several days. TAG1 to

TAG7 represent the weekdays from Monday to

Sunday. Additionally, the

corresponding days

are shown as abbreviation below the menu bar

the display

Block construction:

T 1 5 = same –

program

from Monday

Friday

T 1–6 = same

program

from Monday

Saturday

T 1–7 = same

program

from Monday

Sunday

→

For non-programmed days the factory

preset

remains active

Setting of an individual program:

Press

. Select the menu item

PROG

with the selector wheel. Press

OK.

TAG1

for Monday is shown on the display. Select

day/block with the selector wheel.

Confirm with

Set the beginning of the 1

heating time

(symbol ) with the selector wheel.

Confirm with

. Set the beginning of the

economy time (symbol ) with the

selector wheel. Confirm with

. Now, if

desired, a 2

, 3

or 4

heating/economy

Produkt Specifikationer

Mærke:	Olympia
Kategori:	Ikke kategoriseret
Model:	HT 430-22

Har du brug for hjælp?

Hvis du har brug for hjælp til Olympia HT 430-22 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Olympia Manualer

Olympia HT 430-23A Manual

16 August 2024

Olympia Emergency Button Manual

12 August 2024

Olympia ULA 400 Manual

10 August 2024

Olympia CI 200 Manual

10 August 2024

Olympia HT 430-22 Manual

10 August 2024

Olympia 6109 Manual

9 August 2024

Olympia UL 100 Manual

9 August 2024

Olympia TI 150 Manual

8 August 2024

Olympia HAT 430-23A Manual

6 August 2024

Olympia Sounds of Nature Box Manual

4 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Elektron Overbridge Manual

26 November 2024

Elektron Sidstation Manual

26 November 2024

SKROSS World Adapter Pro+ Manual

26 November 2024

SKROSS PRO – World & USB Manual

26 November 2024

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024