Oricom TP4 Manual

Oricom Ikke kategoriseret TP4

Læs nedenfor 📖 manual på dansk for Oricom TP4 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

3 Installation

3.2

5 Cleaning and care

6 Oricom Support & Warranty

english 2english 1

english 6english 5

english 9

english 4

english 8

english 3

english 7

english english 10 11

Index

1 General Information

Warnings

• The telephone is designed for indoor use only. Do not

install the telephone in areas where there is the risk of

an explosion, excessive exposure to smoke, dust,

vibrations, chemicals, moisture and heat.

• Do not install in damp locations such as a bathroom

or laundry, do not expose the unit to direct sunlight.

• Do not use your telephone during an electrical

thunderstorm as it is possible to get an electric shock.

Refer to information contained in Telstra White pages

directory.

• The earpiece of the handset may attract small metal

objects such as staples and pins. Care should be

taken when placing the handset near these items.

2 Location of controls

1. Hook switch

2. Keypad

3. Recall button

4. Mute Button

5. Pause Button

6. Redial button

7. Telephone line socket

8. Ringer adjusting switch

9. Recall time control switch

N13134

The A-Tick symbol indicates that this

product complies with all current

Australian ACMA standards.

3.1

Connecting the telephone

1. Plug one end of the curly cord into the socket on the handset.

2. Plug the other end of the curly cord into the socket at the

end of the base.

3. Plug the telephone line cord supplied into the socket on the

bottom of the base. Thread the line cord through the groove

toward the back of the base. So the phone base will lay at.

4. Plug the other end of the telephone line cord into the wall

socket.

Note: In Australia some phone wall sockets are the old “non

modular” style. If you have this type of wall socket you will

need to purchase a modular converter plug” (not supplied).

These can be obtained from electronic stores.

Wall mounting

Method A.

1. Use two screws for xing (not supplied).

2. At the desired location drill two holes one above the other,

75mm apart, and leave the screws protruding 5mm from

the wall.

3. Plug the telephone line cord into the base of the phone;

plug the other end into the telephone wall plate socket.

4. Now place the telephone base over the screws and gently

push forwards and then downwards.

5. Slide out the handset guide on the base, rotate it 180°

and replace it. The handset will rest on the guide when

wall mounted.

Pack Contents

TP4 telephone

Curly cord

Long line cord

4 Operation

4.1 Making a call

4.2 Receiving incoming calls

4.3 Redial function

1. Lift the handset and wait for the dial tone.

2. Use the keypad to enter the desired telephone number.

3. To end the call, replace the handset or press the hook

switch to make another call

1. If you receive an incoming call, the phone will ring.

2. To take the call, simply lift the handset.

If a number that you have dialled is engaged or you were

unable to get through to anybody. The last number dialled

will be saved in the telephone automatically. To use the

redial facility, proceed as follows:

1. Lift the handset.

2. Press the REDIAL button. The last saved redial number will

now be dialled.

4.4 MUTE

1. During a call, press and hold MUTE button. Your caller

cannot hear you now.

2. Release MUTE button to resume your call.

4.5 Pause

4.6 Recall

You can insert a few seconds pause into dialling in order to

access custom and telebanking services, long distance, etc.

Press button at the desired point in number. Press Pause

Pause button again if an additional 3.6 seconds is needed.

Press the button followed by the extension number to Recall

transfer calls when connected to a PBX.

4.7 Ringer volume control

The ringer can be adjusted using the switch located Ringer

on the back of the telephone. You can adjust the ringer from

a loud (High) to a soft (Low) sound level.

4.8 Recall time setting

The recall time setting switch should be set to 100ms. The

switch is located at the bottom of the phone.

The surface of the case can be cleaned with a dry, soft,

lint-free cloth. Never use cleaning agents, particularly

aggressive solvents. Apart from occasional cleaning of the

case, no other care is necessary. The rubber feet of the

base station are not resistant to all cleaning agents. The

telephone feet do not normally leave any marks on the

surface. However, on account of the multitude of varnishes

and surface finishes used, surface marks caused by the

feet of the unit cannot be ruled out. The manufacturer can

therefore not be held responsible for possible damage to

furniture or the like.

Customer Support

If you have any problems setting up or using this product

you will nd useful tips and information in the Troubleshooting

section of this user guide as well as “Frequently Asked

Questions” on our website www.oricom.com.au.

If you have further questions about using the product after

reviewing the resources above or would like to purchase

replacement parts or accessories please call our Customer

Support Team. Our dedicated local support team are more

likely to be able to help you than the retailer where you made

your purchase.

Important

Please retain your purchase receipt and attach to the back

page of this user guide as you will need to produce this if

warranty service is required. Take a few moments to register

your product online: www.oricom.com.au

MUTE REC ALL PAUSE

Important Information

Repair Notice

Please be aware that the repair of your goods may result in the

loss of any usergenerated data (such as stored telephone

numbers, text messages and contact information). Please

ensure that you have made a copy of any data saved on your

goods before sending for repair. Please also be aware that

goods presented for repair may be replaced by refurbished

goods or parts of the same type rather than being repaired.

Express Warranty (Australia)

This Express Warranty is provided by Oricom International Pty

Ltd ABN 46 086 116 369, Unit 1, 4 Sovereign Place, South

Windsor NSW 2756, herein after referred to as “Oricom”.

Oricom products come with guarantees that cannot be

excluded under the Australian Consumer Law. You are

entitled to a replacement or refund for a major failure and

compensation for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods repaired or

replaced if the goods fail to be of acceptable quality and the

failure does not amount to a major failure.

Oricom warrants that the product is free from defects in

materials or workmanship during the Express Warranty

Period. This Express Warranty does not extend to any product

from which the serial number has been removed or was

purchased outside of Australia.

Nothing in this Express Warranty excludes, restricts or

modies any condition, warranty, guarantee, implied term,

right or remedy pursuant to the Australian Consumer Law and

which may not be so excluded, restricted or modied. For

such conditions, terms, guarantees and warranties that

cannot be excluded, restricted or modied, Oricom limits the

remedies available to extent permitted in the relevant

legislation.

The Express Warranty Period will be 3 years from the date of

purchase of the product evidenced by your dated sales

receipt. You are required to provide proof of purchase as a

condition of receiving Express Warranty services.

You are entitled to a replacement product or repair of the

product at our discretion according to the terms and

conditions of this document if your product is found to be

faulty within the Express Warranty Period. This Express

Warranty extends to the original purchaser only and is not

transferable.

Products distributed by Oricom are manufactured using new

materials or new and used materials equivalent to new in

performance and reliability. Spare parts may be new or

equivalent to new. Spare parts are warranted to be free from

defects in material or workmanship for thirty (30) days or for

the remainder of the Express Warranty Period of the Oricom

branded product in which they are installed, whichever is

longer. During the Express Warranty Period, Oricom will where

possible repair and if not replace the faulty product or part

thereof. All component parts removed under this Express

Warranty become the property of Oricom. In the unlikely event

that your Oricom product has a recurring failure, Oricom may

always, subject to the Competition and Consumer Act 2010,

at its discretion, elect to provide you with a replacement

product of its choosing that is at least equivalent to your

product in performance.

No change to the conditions of this Express Warranty is valid

unless it is made in writing and signed by an authorised

representative of Oricom.

Oricom will not be liable under this Express Warranty, and to

the extent permitted by law will not be liable for any defect,

loss, damage or injury arising out of or in connection with a:

1. Failure by you to adhere to the warnings and follow the

instructions set out in this user guide for the proper installation

and use of the product;

2. Wilful misconduct or deliberate misuse by you of the

product;

3. Any external cause beyond our control, including but not

limited to power failure, lightning or over voltage; or

4. Modication to the product or services carried out on the

product by anyone other than Oricom or Oricom’s authorised

service provider.

How to make a claim under your Express Warranty

in Australia

Oricom has a simple warranty process for you to follow:

• Please call or email our Customer Support Team, 1300 889

785 or support@ oricom.com.au.

• A Customer Support Team member will verify after

troubleshooting with you if your product qualies under

warranty. If so, they will give you a Product Return

Authorisation number.

• We will then email or fax a Return Authorisation form and a

Repair Notice (if necessary), together with instructions on how

to return the goods for warranty service.

Please note that if a Customer Support Team member advises

that your product does not qualify for return, this warranty

does not apply to your product. Products that are authorised

to be returned to Oricom in Australia must include all of the

following:

• A completed Return Authorisation form

• A copy of your Proof of Purchase (please keep your original

copy)

• The faulty product, including all accessories.

Send the approved returns to:

Oricom International Pty Ltd

Locked Bag 658

South Windsor NSW 2756 Australia

Please note that this Express Warranty excludes expenses

incurred by you in returning any faulty product to us. You

must arrange and pay any expenses incurred (including

postage, delivery, freight, transportation or insurance of the

product) to return the faulty product to us, however, we will

arrange delivery of the repaired or replaced faulty product to

you.

7 Express Warranty Information

1. General Information 2

2. Location of controls 3

3. Installation 4

4. Operation 5

4.1. Making a call ...................................................... 5

4.2. Receiving incoming calls .................................... 5

4.3. Redial function ................................................... 5

4.4. Mute .................................................................. 5

4.5. Pause ................................................................. 5

4.6. Recall ................................................................ 5

4.7. Ringer volume control ........................................ 5

4.8. Recall time setting .............................................. 5

6 Oricom Support 7

5. Cleaning and care 6

7. Express Warranty Information 8

3.1. Connecting the telephone

.................................. 4

3.2. Wall mounting

.................................................... 4

Trimline Phone

TP4

Keep this user guide for future referenc e

Always retain your proof of purchase in case of warranty service and

r er y r warregist ou anty on line a w.orico o aut: ww m.c m.

Contact details for Oricom Support and Express Warranty Claims in Australia

Oricom International Pty Ltd

Locked Bag 658

South Windsor, NSW 2756 Australia

Email: support@oricom.com.au

Phone: 1300 889 785 or 02 4574 8888 (Monday to Friday 8am to 6pm AEST) Fax: (02) 4574 8898

Web: www.oricom.com.au

Contact details for Oricom Support and Express Warranty Claims in New Zealand

Email: support@oricom.co.nz

Phone: 0800 674 266

(Monday to Friday 10am to 8pm NZST)

Web: www.oricom.co.nz

Ref: 13052014

Produkt Specifikationer

Mærke:	Oricom
Kategori:	Ikke kategoriseret
Model:	TP4

Har du brug for hjælp?

Hvis du har brug for hjælp til Oricom TP4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Oricom Manualer

Oricom Eclipse OBHSSOO Manual

19 August 2024

18 August 2024

16 August 2024

14 August 2024

13 August 2024

Oricom WAKE'N' SHAKE WNS10 Manual

12 August 2024

Oricom VISO10 Manual

12 August 2024

Oricom Wake 'N' Shake Dynamite WNS80 Manual

12 August 2024

Oricom OBHAD200 Manual

12 August 2024

Oricom HNA100 Manual

11 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

SoundTube IPD-RS82-EZ Manual

26 November 2024

Kramer 4x1VB Manual

26 November 2024

Kramer RC-63A Manual

26 November 2024

SoundTube IPD-HP82-EZ Manual

26 November 2024

Kramer RK-KVM-1U-PP3 Manual

26 November 2024

Gioteck VX-2 (PS3) Manual

26 November 2024

AOpen DE3650-C Manual

26 November 2024

Lazer Urbanize MIPS Manual

26 November 2024

Symmons Dia 353GB-24 Manual

26 November 2024

SoundTube IPD-RS62-EZ Manual

26 November 2024