Ozito HTER-600U Manual
Ozito
Hækkeklipper
HTER-600U
Læs nedenfor 📖 manual på dansk for Ozito HTER-600U (3 sider) i kategorien Hækkeklipper. Denne guide var nyttig for 11 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
HEDGE
TRIMMER
600W 550mm
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Input: 230-240V ~ 50Hz
Motor: 600W
No Load Speed: 1,400/min
Blade Length: 550mm
Max. Cutting Capacity: 20mm
Protection Class: II
Weight: 3.85kg
WHAT’S IN THE BOX
Hedge Trimmer
Blade Cover
MAINTENANCE DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
• When not in use, the Hedge Trimmer should be stored in a dry, frost free
location not within the reach of children.
• Keep ventilation slots of the Hedge Trimmer clean at all times and prevent any
foreign matter from entering.
• If the enclosure of the Hedge Trimmer requires cleaning do not use solvents
but a moist cloth only.
• There are no user serviceable parts in the Hedge Trimmer; if a fault is
suspected or the supply cord requires replacement, return the Trimmer to a
power tool repairer.
• The blade rail should be cleaned and treated with light machine oil or spray
lubricant (such as WD40, CRC 5.56 or RP7) after each use. When a job lasts
for a longer period of time it is recommended that the blade rail also be treated
with spray lubricant at regular intervals during operation.
Carbon Brushes
When the carbon brushes wear out, the hedge trimmer will spark and/or stop.
Discontinue use as soon as this happens. They should be replaced prior to
recommencing use of the hedge trimmer. Carbon
brushes are a wearing component of the hedge
trimmer therefore not covered under warranty.
Continuing to use the hedge trimmer when carbon
brushes need to be replaced may cause permanent
damage to the hedge trimmer. Carbon brushes
will wear out after many uses but when the carbon
brushes need to be replaced, take the hedge trimmer
to an electrician or a power tool repairer for a quick and low cost replacement.
Always replace both carbon brushes at the same time.
Note: Ozito Industries will not be responsible for any damage or injuries
caused by the repair of the hedge trimmer by an unauthorised person or by
mishandling of the hedge trimmer. This tool is designed for DIY use - use in
commercial or industrial environments will void the warranty.
SPARE PARTS
HEDGE TRIMMER SAFETY WARNINGS
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
Problem Cause Remedy
Blades are not
cutting smoothly.
Blades could be
worn or damaged
Contact customer service.
Poor lubrication Lubricate
Excessive
sparking visible
through air vents
Carbon brushes
may have worn
out
Replace carbon brushes as
per maintenance section.
WARNING! ENSURE THE HEDGE TRIMMER IS
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
HTER-600U
ozito-diy.co.uk
Spare parts can be ordered from the Special Orders
Desk at your local Bunnings Warehouse or Homebase
store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: info@ozito-diy.co.uk
WARNING! When using mains-powered tools, basic safety precautions, including the
following, should always be followed to reduce risk of re, electric shock, personal injury
and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency,
before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Before you connect the equipment to the mains supply make sure that the data on the rating plate are
identical to the mains data.
This tool is double insulated therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid
a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The
insulation system is for added protection against injury resulting from a possible electrical insulation failure
within the tool.
Using an Extension Lead
Always use an approved extension lead suitable for the power input of this tool. Before use, inspect the
extension lead for signs of damage, wear and ageing. Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of an extension lead not
suitable for the power input of the tool or which is damaged or defective may result in a risk of re and electric
shock.
ADDITIONAL INFORMATION
1117
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach
you in perfect condition. In the unlikely event that your device develops a
fault, please contact our service department at the address shown on this
guarantee card. You can also contact us by telephone using the customer
service number shown. Please note the following terms under which
guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the
manufacturer mentioned below promises to buyers of its new products
in addition to their statutory guarantee claims are not affected by this
guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or
manufacturing faults on a product which you have bought from the
manufacturer mentioned below are limited to either the rectication of said
defects on the product or the replacement of the product, whichever we
prefer.
Please note that our devices are not designed for use in commercial, trade
or professional applications. A guarantee contract will not be created if the
device has been used by commercial, trade or industrial business or has
been exposed to similar stresses during the guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly
instructions or due to incorrect installation, a failure to follow the operating
instructions (for example connecting it to an incorrect mains voltage or
current type) or a failure to follow the maintenance and safety instructions
or by exposing the device to abnormal environmental conditions or by lack
of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example
overloading the device or the use or unapproved tools or accessories),
ingress of foreign bodies into the device (such as sand, stones or dust,
transport damage), the use of force or damage caused by external forces
(for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural
wear or tear or by normal use of the device.
4. Your Product is guaranteed for a period of 36 months from the original
date of purchase and is intended for DIY (Do It Yourself) use only. Warranty
excludes consumable parts. Guarantee claims should be submitted
before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the
guarantee period. The original guarantee period remains applicable to the
device even if repairs are carried out or parts are replaced. In such cases,
the work performed or parts tted will not result in an extension of the
guarantee period, and no new guarantee will become active for the work
performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST
RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR
REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts,
consumables and missing parts as set out in the service information in
these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
WARRANTY
WARNING! “Read all safety warnings, instructions, illustrations and specications
provided with this power tool.” Failure to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the warnings refers
to your mains-operated (corded) power tool or battery-operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to
lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the
risk of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power tool. Do
not use a power tool while you are tired or under the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with your
nger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities, ensure
these are connected and properly used. Use of dust collection can reduce dust-related hazards.
h) Do not let familiarity gained from frequent use of tools allow you to become complacent and
ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or remove the battery pack, if detachable, from
the power tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools and accessories. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power
tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and control of the tool in unexpected situations.
5. Service
a. Have your power tool serviced by a qualied repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
SERVICE INFORMATION
Please note that the following parts of this product are subject to normal
or natural wear and that the following parts are therefore also required
for use as consumables.
* Not necessarily included in the scope of delivery!
Category Example
Wear parts* Blade guide, Carbon brushes
Consumables* Blade
Missing parts
For EU countries only
Never place any electric power tools in your household refuse.
To comply with European Directive 2012/19/EC concerning old electric
and electronic equipment and its implementation in national laws, old
electric power tools have to be separated from other waste and disposed
of in an environment-friendly fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to the manufacturer, the
owner of the electrical equipment must make sure that the equipment is
properly disposed of if p1-he no longer wants to keep the equipment. The old
equipment can be returned to a suitable collection point that will dispose
of the equipment in accordance with the national recycling and waste
disposal regulations. This does not apply to any accessories or aids
without electrical components supplied with the old equipment.
The reprinting or reproduction by any other means, in whole or in part, of
documentation and papers accompanying products is permitted only with
the express consent of the iSC GmbH.
Subject to technical changes
Danger!
Sound and vibration
Sound and vibration values were measured in accordance with EN 60745.
Lpa sound pressure level: 89.80dB(A)
Kpa uncertainty: 2.77dB
Lwa
sound power level: 97.20dB(A)
Kwa uncertainty: 2.77 dB
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions) determined in
accordance
with EN 28662-1.
Front handle
Vibration emission value a
h = 1.99 m/s²
K uncertainty = 1.5 m/s ²
Rear handle
Vibration emission value a
h = 2.95 m/s²
K uncertainty = 1.5 m/s ²
The specied vibration value was established in accordance with a
standardized testing method. It may change according to how the electric
equipment is used and may exceed the specied value in exceptional
circumstances.
The specied vibration value can be used to compare the equipment with
other electric power tools.
The specied vibration value can be used for initial assessment of a
harmful effect.
Keep the noise emissions and vibrations to a minimum.
• Only use appliances which are in perfect working order.
• Service and clean the appliance regularly.
• Adapt your working style to suit the appliance.
• Do not overload the appliance.
• Have the appliance serviced whenever necessary.
• Switch the appliance off when it is not in use.
• Wear protective gloves.
Warning! Safety class II
Do not expose the hedge trimmer to rain or wet conditions.
Wear eye protection and
ear plugs!
Read the operating instructions to reduce the rick of inguiry
If the cable is damaged or cut, pull out the power plug from the
mains immediately.
DECLARATION OF CONFORMITY
Wei/Product-ManagementWeichselgartner/General-Manager
explains the following conformity according to EU directives and norms for
the following product
Electric Hedge Trimmer HTER-600U (Ozito)
2014/29/EU
2005/32/EC_2009/125/EC
2014/35/EU
2006/28/EC
X 2014/30/EU
2014/32/EU
2014/53/EC
2014/68/EU
90/396/EC_2009/142/EC
89/686/EC_96/58/EC
X 2011/65/EU
X 2006/42/EC
Annex IV
Notied Body:
Notied Body No.:
Reg. No.:
X 2000/14/EC_2005/88/EC
X Annex V
Annex VI
Noise: measured LWA = 97,20 dB (A); guaranteed LWA = 100 dB (A)
P = 0,6 KW; L/Ø = 55 cm
Notied Body:
2012/46/EU
Emission No.:
Standard references: EN 60745-1; EN 60745-2-15;
EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3
Landau/Isar, den 11.09.2017
First CE: 17 Archive-File/Record: NAPR017661
Art.-No.: 30.002.04 I.-No.: 11017 Documents registrar: Alex Kurz
Subject to change without notice Wiesenweg 22, D-94405 Landau/Isar
ISC GmbH · Eschenstraße 6 · D-94405 Landau/Isar
• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material to
be cut when blades are moving. Make sure the switch is off when clearing jammed material. A moment of
inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or storing
the hedge trimmer always t the cutting device cover. Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
• Keep the cable out of the cutting zone. During operation the cable may be covered by hedges and cut
through by accident.
Please read this safety information and the directions for use carefully and be sure to follow the instructions to
the letter.
1. Always remove the power plug from the socket-outlet before you perform any work on the hedge trimmer,
e.g.
- repairing a damaged cable
- cleaning the blades
- troubleshooting
- cleaning and maintenance
or before leaving the tool unattended.
2. The hedge trimmer can cause serious injuries! Read the directions for use carefully in order to acquaint
yourself with the correct way to handle, set up, service, start and put down the machine. Familiarize yourself
with all the machine’s control elements and its proper use.
3. Always handle the hedge trimmer with both hands.
4. When working with the hedge trimmer, wear sturdy shoes and make sure of your footing.
5. Never work with the hedge trimmer in the rain or on wet hedges and never leave the hedge trimmer
outdoors. The hedge trimmer must not be used if it is wet.
6. We recommend that you wear safety goggles and ear-muff s when working with the hedge trimmer.
7. Wear suitable working clothes such as rubber gloves and non-slip shoes. Do not wear loose garments. Keep
long hair in a hairnet.
8. Avoid abnormal postures and make sure of your footing, particularly when working on ladders and steps.
9. Keep the equipment at a suitable distance from your body while working. Never attempt to remove cuttings
with the blade running or to hold material you want to cut. Always switch off the equipment before attempting
to remove any jammed cuttings. A single moment of carelessness when using the hedge trimmer can result
in serious injuries.
10. Make sure there are no other persons or animals within your working area (radius of swing).
11. Carry the hedge trimmer only by its guide handle.
12. Keep the cable out of the cutting zone. During operation the cable may be hidden in the hedge and be cut
through by accident.
13. Before you use the hedge trimmer, examine the power cable for signs of damage and aging.
14. Use the hedge trimmer only when the power cable is in good working order.
15. Do not remove the power plug from the socket-outlet by pulling on the cable. Never carry the tool by its
cable. Take care not to damage the cable in any way.
16. Protect cables from heat, caustic uids and sharp edges. Replace damaged cables immediately.
17. Examine the cutting system regularly for signs of damage and, if necessary, arrange for the hedge trimmer
to be professionally repaired by the ISC Customer Service Center or a specialist workshop.
18. If the blades become jammed, e.g. due to thick branches or the like, switch off and unplug the hedge
trimmer immediately. Only then are you to remove the cause of the obstruction.
19. Keep the hedge trimmer in a dry place out of children’s reach.
20. During transportation and storage of the hedge trimmer, keep the blades covered at all times with the
special guard.
21. Take care not to overload the hedge trimmer and do not use it on jobs for which it is not intended, i.e. you
are allowed to use the hedge trimmer only to cut hedges, shrubs and perennials.
22. Use only cables and connectors approved for outdoor use:
- power cable HO7RN-F 2x1.0 with integral two-plug plug;
- extension cable HO7RN-F 3G1.5 with rain-water-protected earthing-pin plug and earthing-contact
coupling.
- The use of a leakage-current or earth leakage circuit-breaker is recommended for operating electric tools.
Ask your electrician!
23. The hedge trimmer requires regular inspection and maintenance. Always replace damaged blades in
pairs. If the hedge trimmer suffers any damage from impact (falling on hard ground etc.), have it checked
immediately by a specialist.
24. Look after your hedge trimmer carefully. Keep it clean and sharp to ensure efcient and safe cutting. Follow
the maintenance and cleaning instructions.
25. The German Farmers Union, for example, prohibits the use of electric hedge trimmers by persons aged 17
or less. Persons aged 16 and above may only use electric hedge trimmers if supervised by an adult.
26. Do not use the hedge trimmer with a damaged or excessively worn cutting system.
27. Check your surroundings and take note of any potential dangers which you may not be able hear due to the
machine’s noise.
28. Never try to work with an incomplete machine or a machine with unapproved modications.
29. It is advisable not to use the hedge trimmer when other persons, and particularly children, are nearby.
30. Children are not allowed to use the hedge trimmer.
31. The machine may exceed 85 db (A) at the workplace. The operator will require noise protection measures
and ear muff s if this is the case.
32. Always ensure that all the handles and safety equipment is tted when the hedge trimmer is in use.
33. Examine the hedge for any concealed objects, e.g. wire, before you start your work.
34. This equipment is not designed to be used by people (including children) with limited physical, sensory or
mental capacities or those with no experience and/or knowledge unless they are supervised by a person
who is responsible for their safety or they have received instructions from such a person in how to use the
equipment safely. Children must always be supervised in order to ensure that they do not play with the
equipment.
35. The equipment should be operated via a residual current protective device (RCD) with a trip current of no
more than 30 mA. Do not lose this safety information.
Do not lose this information.
Produkt Specifikationer
| Mærke: | Ozito |
| Kategori: | Hækkeklipper |
| Model: | HTER-600U |
Har du brug for hjælp?
Hvis du har brug for hjælp til Ozito HTER-600U stil et spørgsmål nedenfor, og andre brugere vil svare dig
Hækkeklipper Ozito Manualer
10 Oktober 2024
2 Oktober 2024
1 September 2024
25 August 2024
25 August 2024
15 August 2024
14 August 2024
12 August 2024
12 August 2024
8 August 2024
Hækkeklipper Manualer
- Hækkeklipper Scheppach
- Hækkeklipper Bosch
- Hækkeklipper Honda
- Hækkeklipper Stiga
- Hækkeklipper Metabo
- Hækkeklipper Martha Stewart
- Hækkeklipper DeWalt
- Hækkeklipper Husqvarna
- Hækkeklipper RYOBI
- Hækkeklipper Skil
- Hækkeklipper Gardena
- Hækkeklipper AL-KO
- Hækkeklipper Zipper
- Hækkeklipper Stihl
- Hækkeklipper McCulloch
- Hækkeklipper Makita
- Hækkeklipper Worx
- Hækkeklipper Dolmar
- Hækkeklipper Güde
- Hækkeklipper Jonsered
- Hækkeklipper Vonroc
- Hækkeklipper Hyundai
- Hækkeklipper Milwaukee
- Hækkeklipper Parkside
- Hækkeklipper Florabest
- Hækkeklipper Black And Decker
- Hækkeklipper FERM
- Hækkeklipper Trotec
- Hækkeklipper Einhell
- Hækkeklipper Hikoki
- Hækkeklipper Hitachi
- Hækkeklipper Bavaria
- Hækkeklipper Greenworks
- Hækkeklipper Kress
- Hækkeklipper Remington
- Hækkeklipper Park & Garden
- Hækkeklipper Levita
- Hækkeklipper Atika
- Hækkeklipper Cramer
- Hækkeklipper Echo
- Hækkeklipper Powerworks
- Hækkeklipper Texas
- Hækkeklipper Flymo
- Hækkeklipper Tanaka
- Hækkeklipper Wolf Garten
- Hækkeklipper Topcraft
- Hækkeklipper Kärcher
- Hækkeklipper Craftsman
- Hækkeklipper Gtech
- Hækkeklipper Hurricane
- Hækkeklipper Powerplus
- Hækkeklipper Gamma
- Hækkeklipper Pattfield
- Hækkeklipper Hanseatic
- Hækkeklipper Fieldmann
- Hækkeklipper Spear & Jackson
- Hækkeklipper Baumr-AG
- Hækkeklipper Sun Joe
- Hækkeklipper Cotech
- Hækkeklipper Brandson
- Hækkeklipper Qualcast
- Hækkeklipper Meec Tools
- Hækkeklipper Ferrex
- Hækkeklipper Fuxtec
- Hækkeklipper Shindaiwa
- Hækkeklipper Proviel
- Hækkeklipper Cocraft
- Hækkeklipper Yellow Garden Line
- Hækkeklipper Sovereign
- Hækkeklipper Garden Groom
- Hækkeklipper Challenge
- Hækkeklipper Sterwins
- Hækkeklipper McGregor
- Hækkeklipper Varo
- Hækkeklipper Kibani
- Hækkeklipper Grizzly
- Hækkeklipper G-Technology
- Hækkeklipper Maruyama
- Hækkeklipper Batavia
- Hækkeklipper Gardenline
- Hækkeklipper Efco
- Hækkeklipper Black Decker
- Hækkeklipper Gartenmeister
- Hækkeklipper Lux Tools
- Hækkeklipper Verto
- Hækkeklipper Anova
- Hækkeklipper Budget
- Hækkeklipper Deltafox
- Hækkeklipper Palmera
- Hækkeklipper Yardforce
- Hækkeklipper Powerpeak
- Hækkeklipper Eurogarden
- Hækkeklipper Toledo
- Hækkeklipper Kaaz
- Hækkeklipper Hoberg
- Hækkeklipper Garden Feelings
- Hækkeklipper Mr Gardener
- Hækkeklipper Kingcraft
- Hækkeklipper Mac Allister
- Hækkeklipper Robust
- Hækkeklipper LawnMaster
- Hækkeklipper Ergotools Pattfield
- Hækkeklipper Bestgreen
- Hækkeklipper CMI
- Hækkeklipper MacAllister
- Hækkeklipper Maxbear
Nyeste Hækkeklipper Manualer
23 November 2024
22 November 2024
15 Oktober 2024
14 Oktober 2024
4 Oktober 2024
30 September 2024
29 September 2024
29 September 2024
27 September 2024
21 September 2024