Ozito PXCHTS-018U Manual
Ozito
Heggenschaar
PXCHTS-018U
Læs nedenfor 📖 manual på dansk for Ozito PXCHTS-018U (3 sider) i kategorien Heggenschaar. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/3
• Keep all parts of the body away from the cutter blade. Do not remove cut
material or hold material to be cut when blades are moving. Make sure the switch is off when
clearing jammed material. A moment of inattention while operating the hedge trimmer may result
in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade
stopped. When transporting or storing the hedge trimmer always t the cutting device cover.
Proper handling of the hedge trimmer will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the
cutter blade may contact hidden wiring. Cutter blades contacting a “live” wire may
make exposed metal parts of the power tool “live” and could give the operator an electric shock.
• Perform visual inspection on the hedge being trimmed. To ensure no wire
fences or foreign objects that the hedge trimmer may contact during operation.
• Never allow children or people unfamiliar with these instructions to use the Hedge Trimmer.
• Avoid using the Hedge Trimmer, while people, especially children or pets, are nearby.
• Use the Hedge Trimmer only in daylight or good articial light.
• Never operate the Hedge Trimmer with damaged guards or without guards in place.
• Switch on the Hedge Trimmer only when the hands and feet are away from the cutting blades.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Always remove the battery from the Hedge Trimmer when leaving the Hedge Trimmer unattended.
• Always remove the battery from the Hedge Trimmer before carrying out maintenance or cleaning
work.
• Inspect and maintain the Hedge Trimmer regularly. Have the Hedge Trimmer repaired only by an
authorized repairer.
• When not in use, store the Hedge Trimmer out of the reach of children.
• Face the cutting blades away from yourself, other people and animals while the power is connected
to the Hedge Trimmer (especially during operation).
• Use both handles.
• Keep ventilation openings clear of debris. Keep handles dry, clean and free of oil and grease.
• Never reach underneath the Hedge Trimmer (the cutting blade area) until it has completely stopped
and the power has been disconnected.
WARNING! When servicing, use only identical replacement parts. Use of any other parts
may create a hazard or cause product damage. To ensure safety and reliability, all repairs
should be performed by a qualied service technician.
WARNING! This appliance is not intended for use by young or inrm persons unless
supervised by a responsible person to ensure that they can use the appliance safely. Young
children should be supervised to ensure that they do not play with the appliance.
CORDLESS HEDGE
TRIMMER
ORIGINAL INSTRUCTIONS
SPECIFICATIONS
Voltage: 18V
Cuts/min: 2,200
Max. Cutting Capacity: 11mm
Blade Cutting Length: 460mm
Weight: 2.0kg
PXCHTS-018U
WHAT’S IN THE BOX
Hedge Trimmer
Blade Cover
MAINTENANCE
DESCRIPTION OF SYMBOLS
TROUBLESHOOTING
WARRANTY
SPARE PARTS
ozito-diy.co.uk
WARNING! When using mains-powered tools, basic safety precautions, including
the following, should always be followed to reduce risk of re, electric shock,
personal injury and material damage.
Read the whole manual carefully and make sure you know how to switch the tool off in an emergency, before operating the tool.
Save these instructions and other documents supplied with this tool for future reference.
Before you connect the charger to the mains supply make sure that the data on the rating plate are identical to the mains data.
This tools charger is double insulated therefore no earth wire is required.
If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order to avoid a hazard.
Note: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical insulation failure within the tool.
The power supply for this products charger should be protected by a residual current device (rated at 30mA or less). A residual current
device reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
ELECTRICAL SAFETY
0716
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR
BATTERY CHARGER.
1. Before using the charger read all instructions and cautionary markings on the charger, battery pack and the product using the
battery pack.
2. This charger is not intended for any uses other than charging rechargeable batteries. Any other use may result in risk of re,
electric shock or electrocution.
3. Do not place any object on top of the charger or place the charger on a soft surface that may result in excessive internal heat.
Place the charger in a position away from any heat source.
4. To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
5. Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
6. An extension cord should not be used unless absolutely necessary. Use of an improper extension cord could result in the risk of re,
electric shock or electrocution.
7. Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any way. Have it checked by an
electrician or power tool repairer.
8. Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is required. Incorrect reas-
sembly may result in a risk of electric shock, electrocution or re.
9. To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. Removing the battery pack
will not reduce this risk.
10. Never attempt to connect 2 chargers together.
11. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 40ºC (such as inside sheds or
metal buildings in summer).
12. The charger is designed to operate on standard household electrical power (240 volts). Do not attempt to use it on any other
voltage!
13. The battery pack is not fully charged out of the carton. First read the safety instructions and then follow the charging notes and
procedures.
14. The longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18 -
24ºC. Do not charge the battery pack in an air temperature below 10ºC or above 40ºC. This is important and will prevent damage
to the battery pack.
15. Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery can explode in a re.
16. Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or cracks, immediately
discontinue use and do not recharge.
17. During charging, the battery must be placed in a well ventilated area.
WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, re and/or serious injury.
Save all warnings and instructions for future reference. The term “power tool” in the
warnings refers to your mains-operated (corded) power tool or battery-operated (cordless)
power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b. Do not operate power tools in explosive atmospheres, such as in the presence of
ammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose
control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.
d. Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
f. If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces the risk of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the inuence of drugs, alcohol
or medication. A moment of inattention while operating power tools may result in serious personal injury.
b. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
c. Prevent unintentional starting. Ensure the switch is in the off-position before connecting
to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your nger on the switch or energising power tools that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
e. Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
g. If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b. Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
c. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are dangerous in
the hands of untrained users.
e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
g. Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. Battery tool use and care
a. Recharge only with the charger specied by the manufacturer. A charger that is suitable for one
type of battery pack may create a risk of re when used with another battery pack.
b. Use power tools only with specically designated battery packs. Use of any other battery packs may
create a risk of injury and re.
c. When battery pack is not in use, keep it away from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together may cause burns or a re.
d. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If
contact accidentally occurs, ush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
6. Service
a. Have your power tool serviced by a qualied repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
BATTERY AND CHARGER SAFETY WARNINGS
Cleaning and Storage
• Keep air intake clean and air vents free of debris to avoid overheating the motor.
• Do not use cleaning agents to clean the plastic parts of the tool.
A mild detergent on a damp cloth is recommended. Water must never come into contact with
the tool.
• If the trimmer vibrates abnormally, stop motor immediately. Abnormal vibration usually indicates
a mechanical problem continued operation could lead to injury or damage.
• Always place the blade cover on the blade before storing or transporting the hedge trimmer. Use
caution to avoid the sharp teeth of the blade.
• Store the hedge trimmer indoors, in a dry place that is inaccessible to children.
WARNING! ALWAYS ENSURE THE TOOL HAS
COMPLETELY STOPPED AND THE BATTERY IS
REMOVED PRIOR TO ANY MAINTENANCE.
Problem Cause Remedy
Trimmer is not
starting
Possible clogging Clean the trimmer blade of any
leaves or debris.
Battery is low in charge Charge battery
Battery not inserted properly Insert battery pack correctly
Trimmer is not
operating at full
capacity
Possible clogging Clean the trimmer blade of any
leaves or debris.
Motor stops while
trimming
Battery has no power Charge battery
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the
trimmer by an unauthorised person or by mishandling of the trimmer. This tool is designed for DIY use
- use in commercial or industrial environments will void the warranty.
HEDGE TRIMMER SAFETY WARNINGS
Read instruction manual
Keep bystanders away. Do not operate whilst people especially
children or pets are in the area.
Wear eye and ear protection.
89
Decibel level
Sharpening the cutting blade
1. Start and stop your hedge
trimmer until the cutter blade
and the guard are slightly
offset.
2. Remove the battery pack from
your hedge trimmer.
3. Clamp the blade assembly in a vise and le the exposed cutting surface of each
blade tooth. Remove as
little material as possible.
4. Remove the hedge trimmer from
the vise and insert the battery pack. Repeat
steps 1-3 for the unsharpened edges of the
blade teeth.
Note: Do not operate your hedge trimmer with
dull or damaged cutting blades. This may cause
overload and will give unsatisfactory cutting
results.
Lubricating the blade
For best operation and longer blade life, lubricate the hedge trimmer blade with light
weight machine oil before and after each use.
1. Remove the battery pack from the hedge
trimmer.
2. Lay the hedge trimmer on a at surface. Apply
a light weight machine oil along the edge of
the top blade.
Battery & Charger sold
separately
WARNING! DO NOT OIL WHILE THE HEDGE TRIMMER
IS RUNNING.
OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG
All of our products undergo strict quality checks to ensure that they reach you in perfect
condition. In the unlikely event that your device develops a fault, please contact our service
department at the address shown on this guarantee card. You can also contact us by
telephone using the customer service number shown. Please note the following terms under
which guarantee claims can be made:
1. These warranty terms regulate additional warranty services, which the manufacturer
mentioned below promises to buyers of its new products in addition to their statutory
guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.
2. The warranty services only covers defects due to material or manufacturing faults on
a product which you have bought from the manufacturer mentioned below are limited to
either the rectication of said defects on the product or the replacement of the product,
whichever we prefer.
Please note that our devices are not designed for use in commercial, trade or professional
applications. A guarantee contract will not be created if the device has been used by
commercial, trade or industrial business or has been exposed to similar stresses during the
guarantee period.
3. The following are not covered by our guarantee:
- Damage to the device caused by a failure to follow the assembly instructions or due to
incorrect installation, a failure to follow the operating instructions (for example connecting
it to an incorrect mains voltage or current type) or a failure to follow the maintenance and
safety instructions or by exposing the device to abnormal environmental conditions or by
lack of care and maintenance.
- Damage to the device caused by abuse or incorrect use (for example overloading the
device or the use or unapproved tools or accessories), ingress of foreign bodies into the
device (such as sand, stones or dust, transport damage), the use of force or damage caused
by external forces (for example by dropping it).
- Damage to the device or parts of the device caused by normal or natural wear or tear or by
normal use of the device.
4. Your Product is guaranteed for a period of 60 months from the original date of purchase
and is intended for DIY (Do It Yourself) use only. Lithium Ion batteries and chargers are
covered by a 12 month warranty. Warranty excludes consumable parts. Guarantee claims
should be submitted before the end of the guarantee period within two weeks of the defect
being noticed. No guarantee claims will be accepted after the end of the guarantee period.
The original guarantee period remains applicable to the device even if repairs are carried
out or parts are replaced. In such cases, the work performed or parts tted will not result
in an extension of the guarantee period, and no new guarantee will become active for the
work performed or parts tted. This also applies if an on-site service is used.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO
THE PLACE OF PURCHASE WITH YOUR REGISTER RECEIPT.
Please refer to the restrictions of this warranty concerning wearing parts, consumables and
missing parts as set out in the service information in these operating instructions.
CUSTOMER SERVICE HELPLINE
GB: 0151 294 4488
IRL: 1850 882711
Ozito-diy.co.uk
Spare parts can be ordered from the Special Orders Desk at your local
Bunnings Warehouse or Homebase store.
For further information, or any parts visit
www.ozito-diy.co.uk or contact Ozito Customer Service:
Great Britain: 0151 294 4488
Ireland: 1850 882711
E-mail: enquires@ozito-diy.co.uk
Produkt Specifikationer
| Mærke: | Ozito |
| Kategori: | Heggenschaar |
| Model: | PXCHTS-018U |
Har du brug for hjælp?
Hvis du har brug for hjælp til Ozito PXCHTS-018U stil et spørgsmål nedenfor, og andre brugere vil svare dig
Heggenschaar Ozito Manualer
10 Oktober 2024
2 Oktober 2024
1 September 2024
25 August 2024
25 August 2024
15 August 2024
14 August 2024
23 Juli 2024
20 Juli 2024
Heggenschaar Manualer
- Heggenschaar Scheppach
- Heggenschaar Bosch
- Heggenschaar Honda
- Heggenschaar Stiga
- Heggenschaar Metabo
- Heggenschaar DeWalt
- Heggenschaar Husqvarna
- Heggenschaar RYOBI
- Heggenschaar Skil
- Heggenschaar Gardena
- Heggenschaar AL-KO
- Heggenschaar Zipper
- Heggenschaar Stihl
- Heggenschaar McCulloch
- Heggenschaar Makita
- Heggenschaar Worx
- Heggenschaar Dolmar
- Heggenschaar Güde
- Heggenschaar Vonroc
- Heggenschaar Hyundai
- Heggenschaar Parkside
- Heggenschaar Florabest
- Heggenschaar Black And Decker
- Heggenschaar FERM
- Heggenschaar Einhell
- Heggenschaar Hikoki
- Heggenschaar Bavaria
- Heggenschaar Greenworks
- Heggenschaar Kress
- Heggenschaar Levita
- Heggenschaar Atika
- Heggenschaar Cramer
- Heggenschaar Echo
- Heggenschaar Texas
- Heggenschaar Flymo
- Heggenschaar Tanaka
- Heggenschaar Wolf Garten
- Heggenschaar Topcraft
- Heggenschaar Kärcher
- Heggenschaar Craftsman
- Heggenschaar Gtech
- Heggenschaar Hurricane
- Heggenschaar Powerplus
- Heggenschaar Gamma
- Heggenschaar Pattfield
- Heggenschaar Hanseatic
- Heggenschaar Fieldmann
- Heggenschaar Spear & Jackson
- Heggenschaar Baumr-AG
- Heggenschaar Sun Joe
- Heggenschaar Cotech
- Heggenschaar Brandson
- Heggenschaar Qualcast
- Heggenschaar Meec Tools
- Heggenschaar Ferrex
- Heggenschaar Fuxtec
- Heggenschaar Shindaiwa
- Heggenschaar Cocraft
- Heggenschaar Sovereign
- Heggenschaar Challenge
- Heggenschaar Sterwins
- Heggenschaar McGregor
- Heggenschaar Grizzly
- Heggenschaar G-Technology
- Heggenschaar Maruyama
- Heggenschaar Batavia
- Heggenschaar Gardenline
- Heggenschaar Efco
- Heggenschaar Black Decker
- Heggenschaar Lux Tools
- Heggenschaar Verto
- Heggenschaar Anova
- Heggenschaar Deltafox
- Heggenschaar Palmera
- Heggenschaar Yardforce
- Heggenschaar Powerpeak
- Heggenschaar Eurogarden
- Heggenschaar Toledo
- Heggenschaar Kaaz
- Heggenschaar Hoberg
- Heggenschaar Garden Feelings
- Heggenschaar Mr Gardener
- Heggenschaar Kingcraft
- Heggenschaar Mac Allister
- Heggenschaar Robust
- Heggenschaar LawnMaster
- Heggenschaar Ergotools Pattfield
- Heggenschaar Bestgreen
- Heggenschaar CMI
- Heggenschaar MacAllister
- Heggenschaar Maxbear
Nyeste Heggenschaar Manualer
4 Oktober 2024
30 September 2024
29 September 2024
29 September 2024
27 September 2024
21 September 2024
16 September 2024
15 September 2024
8 September 2024
6 September 2024