Ozito OSI-40 Manual

Ozito Loddemaskine OSI-40

Læs nedenfor 📖 manual på dansk for Ozito OSI-40 (4 sider) i kategorien Loddemaskine. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

SOLDERING

IRON

INSTRUCTION MANUAL

SPECIFICATIONS

Input: 230-240V ~ 50Hz

Power: 40W

Max. Temperature: 450°C

Weight: 0.23kg

OSI-40

STANDARD EQUIPMENT

WARRANTY

OZITO Australia/New Zealand (Head Ofﬁce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.

ozito.com.au

Soldering Iron

1220

IN ORDER TO MAKE A CLAIM UNDER THIS

WARRANTY YOU MUST RETURN THE PRODUCT

TO YOUR NEAREST BUNNINGS WAREHOUSE

WITH YOUR BUNNINGS REGISTER RECEIPT.

PRIOR TO RETURNING YOUR PRODUCT

FOR WARRANTY PLEASE TELEPHONE OUR

CUSTOMER SERVICE HELPLINE:

Australia: 1800 069 486

New Zealand: 0508 069 486

The beneﬁts provided under this warranty are in addition to other rights and remedies

which are available to you at law.

Our goods come with guarantees that cannot be excluded at law. You are entitled to a

replacement or refund for a major failure and for compensation for any other reasonably

foreseeable loss or damage. You are also entitled to have the goods repaired or replaced

if the goods fail to be of acceptable quality and the failure does not amount to a major

failure.

Generally you will be responsible for all costs associated with a claim under this warranty,

however, where you have suffered any additional direct loss as a result of a defective

product you may be able to claim such expenses by contacting our customer service

helpline above.

TO ENSURE A SPEEDY RESPONSE PLEASE

HAVE THE MODEL NUMBER AND DATE OF

PURCHASE AVAILABLE. A CUSTOMER SERVICE

REPRESENTATIVE WILL TAKE YOUR CALL AND

ANSWER ANY QUESTIONS YOU MAY HAVE

RELATING TO THE WARRANTY POLICY OR

PROCEDURE.

GENERAL POWER TOOL SAFETY WARNINGS

SOLDERING IRON WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to

follow the warnings and instructions may result in electric shock,

ﬁre and/or serious injury.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive atmospheres, such as in the

presence of ﬂammable liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never modify the plug in any

way. Do not use any adapter plugs with earthed (grounded) power tools.

Unmodiﬁed plugs and matching outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

d. Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords increase the risk of electric shock.

3. Personal safety

a. Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inﬂuence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. Always wear eye protection. Protective

equipment such as dust mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and/or battery pack, picking up or

carrying the tool. Carrying power tools with your ﬁnger on the switch or

energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A

wrench or a key left attached to a rotating part of the power tool may result in

personal injury.

e. Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or jewellery. Keep your hair,

clothing and gloves away from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

h. Do not let familiarity gained from frequent use of tools allow you to

become complacent and ignore tool safety principles. A careless action can

cause severe injury within a fraction of a second.

4. Power tool use and care

a. Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at the rate

for which it was designed.

c. Disconnect the plug from the power source and/or the battery pack from

the power tool before making any adjustments, changing accessories,

or storing power tools. Such preventive safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these instructions to operate

the power tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts,

breakage of parts and any other condition that may affect the power tool’s

operation. If damaged, have the power tool repaired before use. Many

accidents are caused by poorly maintained power tools.

g. Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and the

work to be performed. Use of the power tool for operations different from

those intended could result in a hazardous situation.

h. Keep handles and grasping surfaces dry, clean and free from oil and

grease. Slippery handles and grasping surfaces do not allow for safe handling

and control of the tool in unexpected situations.

WARNING! The appliance is not to be used by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction.

Young children should be supervised to ensure that they do not play with the

appliance.

• Ensure that the tip is correctly ﬁtted before heating the soldering iron. Ensure

that it is fastened correctly and tightly with the clamping screw.

• Do not leave the soldering iron plugged in and unattended. Disconnect the tool

from the mains power once ﬁnished with use.

• Allow the tool to cool completely before storage. Rest the tool on the provided

stand or a non-ﬂammable surface when required.

• The soldering iron must be placed on its stand when plugged in and not in use.

• A ﬁre may result if the soldering iron is not used with care, therefore:

• be careful when using the appliance in places where there are combustible

materials. Do not apply to the same place for a long time.

• do not use in presence of an explosive atmosphere

• heat may be conducted to combustible materials which are out of sight

• Do not expose to water or moisture. Ensure no liquids enters the tool.

• This tool is intended for indoor use only.

• Never start up the soldering iron without a soldering tip ﬁtted.

• Do not touch the tip while operating the tool.

• Only solder in well ventilated areas. Toxic fumes can be produced when

soldering which can lead to damage to the mucous membranes and or chronic

respiratory illnesses.

• Do not eat or drink whilst soldering as solder can contain lead. Always wash

your hands thoroughly after ﬁnishing work.

• Keep the hot soldering tip clear of the mains cable to prevent accidental

damage.

• Do not use the tool if the mains cable is damaged.

WARNING! When using mains-powered tools, basic safety

precautions, including the following, should always be followed

to reduce risk of ﬁre, electric shock, personal injury and material

damage.

Read the whole manual carefully and make sure you know how to switch the

tool off in an emergency, before operating the tool. Save these instructions and

other documents supplied with this tool for future reference.

The tool has been designed for 230V and 240V only. Always check that the

power supply corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for

Australia and New Zealand.

ELECTRICAL SAFETY

40W

3 YEAR REPLACEMENT WARRANTY*

Your product is guaranteed for a period of 36 months from the original date of

purchase. If a product is defective it will be replaced in accordance with the terms of

this warranty. Warranty excludes consumable parts, for example: valve adapters and

accessories.

*This product is intended for DIY use only and replacement warranty covers domestic use.

WARNING

The following actions will result in the warranty being void.

If the tool has been operated on a supply voltage other than that speciﬁed on the tool.

If the tool shows signs of damage or defects caused by or resulting from abuse, accidents

or alterations.

Failure to perform maintenance as set out within the instruction manual.

If the tool is disassembled or tampered with in any way.

Professional, industrial or high frequency use.

Angled Soldering Tip & Metal

Stand

Produkt Specifikationer

Mærke:	Ozito
Kategori:	Loddemaskine
Model:	OSI-40

Har du brug for hjælp?

Hvis du har brug for hjælp til Ozito OSI-40 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Loddemaskine Ozito Manualer

1 August 2024

10 April 2024

19 Maj 2023

15 Oktober 2022

Loddemaskine Manualer

Nyeste Loddemaskine Manualer

Parkside PLK 60 A1 Manual

3 November 2024

Stamos S-LS-62 Manual

19 Oktober 2024

Stamos S-LS-17 Manual

15 Oktober 2024

Stamos S-LS-12 Manual

15 Oktober 2024

Stamos S-LS-73 Manual

15 Oktober 2024

Stamos S-LS-6 Manual

15 Oktober 2024

Stamos S-LS-72 Manual

15 Oktober 2024

Stamos S-LS-10 Manual

15 Oktober 2024

Stamos S-LS-45 S Manual

15 Oktober 2024

Stamos S-LS-22 Manual

15 Oktober 2024