Ozito ZLDDK-150U Manual

Ozito Boremaskine ZLDDK-150U

Læs nedenfor 📖 manual på dansk for Ozito ZLDDK-150U (2 sider) i kategorien Boremaskine. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

DRILL

DRIVER

12V Lithium Ion

INSTRUCTION MANUAL

SPECIFICATIONS

ZLDDS-012U

WHAT’S IN THE BOX

Cordless Drill Driver

TROUBLESHOOTING

WARNING! Wear ear protectors when impact drilling. Exposure to noise can

cause hearing loss.

Use auxiliary handle(s), if supplied with the tool. Loss of control can cause

personal injury.

Hold power tool by insulated gripping surfaces, when performing an operation

where the cutting accessory may contact hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may make exposed metal parts of the power tool

“live” and could give the operator an electric shock.

Before drilling into walls, ceilings etc, ensure that there are no concealed power cables

or pipes in the cavity.

WARNING! Some dust created by power sanding, sawing, grinding,

drilling and other construction activities contain chemicals known to cause

cancer, birth defects or other reproductive harm. Some examples of these

chemicals are:

• Lead from lead-based paints

• Crystalline silica from bricks and cement and other masonry products

• Arsenic and chromium from chemically treated timber

Your risk from exposure to these chemicals varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well ventilated

area and work with approved safety equipment, such as dust masks that are specially

designed to  lter out microscopic particles.

This appliance is not intended for use by young or inﬁ rm persons unless

supervised by a responsible person to ensure that they can use the appliance

safely. Young children should be supervised to ensure that they do not play with the

appliance.

ozito-diy.co.uk

DRILL DRIVER SAFETY WARNINGS

GENERAL POWER TOOL SAFETY WARNINGS

ELECTRICAL SAFETY

LED lights do not illuminate on charger

Check the charging adaptor is securely plugged into the wall outlet.

Check the battery is  rmly connected to the charging cradle.

Check that the charging jack is securely connected to the charging cradle.

The battery has a short run time

Ensure the battery is properly charged. It will take 4-5 charging cycles

before the battery reaches optimum charge and run time.

Variable speed trigger is locked

Ensure that the forward / reverse lever is in the correct position; pressed

left for forwards direction, pressed right for backwards direction. If it is in

between the two settings the variable speed trigger will be locked.

The drill is stripping the screw head

Ensure you are starting with a low torque setting and holding the drill

securely onto the screw head. Increase the torque setting as required.

Drill has cut out during use

The drill may have cut out due to excessive hand pressure. Reduce the

hand pressure applied while drilling.

The battery charge could be completely depleted. Place the battery on the

charging cradle and charge the battery.

Sparking visible through the housing air vents

A small amount of sparking may be visible through the housing vents.

This is normal and does not indicate a problem.

Belt Clip

WARNING! When using mains-powered tools, basic safety precautions, including

the following, should always be followed to reduce risk of ﬁ re, electric shock,

personal injury and material damage.

Read the whole manual carefully and make sure you know how to switch the tool o󰀨 in an

emergency, before operating the tool. Save these instructions and other documents supplied with

this tool for future reference.

The charger has been designed for 230V and 240V only. Always check that the power supply

corresponds to the voltage on the rating plate.

Note: The supply of 230V and 240V on Ozito tools are interchangeable for the UK.

This tools charger is double insulated; therefore no earth wire is required.

If the supply cord is damaged, it must be replaced by an electrician or a power tool repairer in order

to avoid a hazard.

Note: Double insulation does not take the place of normal safety precautions when operating this

tool. The insulation system is for added protection against injury resulting from a possible electrical

insulation failure within the tool.

The power supply for this products charger should be protected by a residual current device (rated

at 30mA or less). A residual current device reduces the risk of electric shock.

MAINTENANCE DESCRIPTION OF SYMBOLS

1. When not in use, the drill should be stored in a dry, frost free

location, keep out of children’s reach.

2. Keep ventilation slots of the drill clean at all times and prevent

anything from entering.

3. If the housing of the drill requires cleaning, do not use solvents.

Use of a cloth only is recommended.

4. Blow out the ventilation slots with compressed air periodically .

Note: Ozito Industries will not be responsible for any damage or

injuries caused by repair of the drill by an unauthorised person or by

mishandling.

Spare parts can be ordered from the Special Orders Desk

at your local Bunnings Warehouse.

For further information, or any parts not listed here, visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

GB: 0151 294 4488

IRL: 1850 882711

E-mail: info@ozito-diy.co.uk

SPARE PARTS

WARRANTY

iSC GmbH · Eschenstraße 6 · 94405 Landau /Isar · Germany 0819

Warning

Read instruction manual

ø Diameter

mA Milliamperes

Double insulated

/min Revolutions or reciprocation per minute

Ah Amp hour

Nm o Newton Meters nNo load speed

VVolts Hz Hertz

ac/~ W Alternating current Watts

Direct current

dc/

WARNING! Read all the safety information, instructions, illustrations and

technical data provided on or with this power tool. Failure to adhere to the

following instructions may result in electric shock,  re and/or serious injury.

Keep all the safety information and instructions in a safe place for future use.

The term „power tool“ used in the safety information and instructions refers to power

tools operated from the mains power supply (with a power cable) and to battery ope-

rated power tools (without a power cable).

1. Workplace safety

a) Untidy or unlit work areas Keep your work area clean and well illuminated.

can result in accidents.

b) Do not operate the electric tool in an environment where there is a risk of

explosions and where there are inﬂ ammable liquids, gases or dust. Electric

tools produce sparks which could set the dust or vapours alight.

c) Keep children and other people away from the power tool while you are

using it. If you are distracted you may lose control of the power tool.

2. Electrical safety

a) The connector plug from this electric tool must ﬁ t into the socket. The plug

should never be altered in any way. Never use adapter plugs together with

earthed electric tools. Unaltered plugs and correct sockets reduce the risk of an

electric shock.

b) Avoid bodily contact with earthed surfaces such as pipes, heating, ovens

and fridges. The risk of electric shock is increased if your body is earthed.

c) The ingress of water Keep the tool out of the rain and away from moisture.

into an electric tool increases the risk of an electric shock.

d) Do not use the power cable for a purpose for which it is not designed, for

example to carry the power tool, hang it up or to pull the plug out of the

socket. Keep the power cable away from heat, oil, sharp edges and moving

parts. Power cables that are damaged or tangled increase the risk of an electric

shock.

e) If you use an electric power tool outdoors, use only extension cables that

are suitable for outdoor use. The use of an extension cable which is suitable

for outdoor use reduces the risk of an electric shock.

f) If operation of the electric tool in a damp environment can not be avoided,

use a earth-leakage circuit-breaker. The earth-leakage circuit-breaker reduces

the risk of an electric shock.

3. Safety of persons

a) Be careful, watch what you are doing and use an electric tool sensibly. Do

not use the tool if you are tired or under the inﬂ uence of drugs, alcohol or

medication. A moment of inattention when using the electric tool can result in

serious injuries.

b) Wear personal protection equipment and always wear safety goggles.

Wearing personal protection (such as dust masks, non-slip safety shoes, safety

helmet or ear protection, depending upon the type and use of the electric tool)

reduces the risk of injury.

c) Make sure that the appliance cannot start up accidentally. Ensure that the

electric tool is switched oﬀ before you connect it to the power supply and/

or insert the battery, or pick up or carry the tool. If your  nger is on the switch

whilst carrying the electric tool or if you connect the appliance to the mains when

it is switched on, this can lead to accidents.

d) Remove all adjusting tools or wrenches before you switch on the power

tool. Any tool or wrench in a rotating part of the power tool could cause injuries.

e) Avoid abnormal working postures. Make sure you stand squarely and keep

your balance at all times. This will enable you to control the power tool better in

unexpected situations.

f) Wear suitable clothes. Never wear loose ﬁ tting clothes or jewelry. Keep hair,

clothing and gloves away from moving parts. Loose clothing, jewelry or long hair

can be caught by moving parts.

g) If dust extraction devices and dust collection devices can be ﬁ tted, they

must be connected and must be used correctly. The use of a dust extractor

can reduce the dangers posed by dust.

h) Do not allow yourself to be lulled into a false sense of security and do not

ignore the safety regulations covering electric power tools, even if you are

familiar with the power tool after having used it many times. Carelessness

can lead to serious injuries in just a fraction of a second.

4. Using and handling the power tool

a) Do not overload your power tool. Use the correct electric tool for the job in

hand. The correct tool will enable you to work better and more safely within the

speci c performance range.

b) Do not use an electric power tool if the switch is defective. An electric power

tool that cannot be switched on or o󰀨 is dangerous and must be repaired.

c) Pull the plug out of the socket and/or remove the battery pack before ma-

king any adjustments to the tool, changing accessories or putting the pow-

er tool down. These precautions will prevent the power tool starting accidentally.

d) Keep unused electric tools out of the reach of children. Do not allow people

who are not familiar with the power tool or who have not read these instruc-

tions to use the tool. Electric tools are dangerous if they are used by inexpe-

rienced people.

e) Look after power tools plug-in tools with care. Check that moving parts

function correctly and do not jam, and whether any parts are broken or da-

maged such that they adversely aﬀ ect the function of the power tool. Have

damaged parts repaired before you use the power tool. Many accidents are

caused by poorly maintained electric tools.

f) Carefully maintained cutting tools with Keep cutting tools sharp and clean.

sharp cutting edges will jam less and are easier to control.

g) Use the power tool, accessories, plug-in tools, etc. as set out in these

instructions. Take account of the conditions in your work area and the job

in hand. Using electric tools for purposes other than the one for which they are

designed can result in dangerous situations.

h) Keep the handles and grip surfaces dry, clean and free from oil and grease.

If the handles and grip surfaces are slippery, it will not be possible to operate and

control the power tool safely in unforeseen situations.

5. Using and handling the cordless tool

a) Only charge the batteries in chargers that are recommended by the manu-

facturer. A charger that is designed for a certain type of battery may pose a  re

risk if it is used with other types of battery.

b) The use of other batteries Use only the correct batteries in the electric tools.

may result in injuries and a  re risk.

c) Keep unused batteries away from paper clips, coins, keys, nails, screws

and other metallic objects that could cause a short circuit between the con-

tacts. A short circuit between the battery contacts may cause burns or a  re.

d) In case of incorrect use, ﬂ uid may escape from the battery. Avoid contact

with it. If you touch it by accident, rinse the aﬀ ected area with water. If you

get the ﬂ uid in your eyes, also seek medical advice. Leaking battery  uid can

cause skin irritation or burns.

e) Damaged or altered Never use damaged or altered rechargeable batteries.

rechargeable batteries can behave unpredictably and lead to a risk of  re, explo-

sion or injury.

f) Never expose a rechargeable battery to ﬁ re or high temperatures. Fire or

temperatures over 130°C pose a risk of explosion.

g) Follow all the instructions on charging and never charge the rechargeable

battery or cordless tool outside the speciﬁ ed allowable charging tempera-

ture range. Incorrect charging or charging outside the allowable charging tempe-

rature range could cause irreparable damage to the battery and increase the risk

of  re.

6. Service

a) Have your electric tool repaired only by trained personnel using only genui-

ne spare parts. This will ensure that your electric tool remains safe to use.

b) Never perform maintenance work on damaged rechargeable batteries. All

maintenance work on rechargeable batteries should only be performed by the

manufacturer or authorized after sales service outlets..

All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault,

please contact our service department at the address shown on this guarantee card. You can also contact us by telephone using the customer service

number shown. Please note the following terms under which guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the manufacturer mentioned below promises to buyers of its new products in addition

to their statutory guarantee claims are not affected by this guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or manufacturing faults on

a product which you have bought from the manufacturer mentioned below are limited to either the rectiﬁ cation of said defects on the product or the

replacement of the product, whichever we prefer.

Please note that our devices are not designed for use in commercial, trade or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly instructions or due to incorrect installation, a failure to follow the operating instructions

(for example connecting it to an incorrect mains voltage or current type) or a failure to follow the maintenance and safety instructions or by exposing the

device to abnormal environmental conditions or by lack of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example overloading the device or the use or unapproved tools or accessories), ingress of

foreign bodies into the device (such as sand, stones or dust, transport damage), the use of force or damage caused by external forces (for example by

dropping it).

- Damage to the device or parts of the device caused by normal or natural wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 60 months from the original date of purchase and is intended for DIY (Do It Yourself) use only. Lithium Ion

batteries and chargers are covered by a 12 month warranty. Warranty excludes consumable parts, for example: grinding discs. Guarantee claims should

be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end

of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such

cases, the work performed or parts ﬁ tted will not result in an extension of the guarantee period, and no new guarantee will become active for the work

performed or parts ﬁ tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR REGISTER

RECEIPT.

Please refer to the restrictions of this warranty concerning wearing parts, consumables and missing parts as set out in the service information in these

operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

Manual_ZLDDS-012U.indd 1-3 06.08.2019 10:30:39