Philips HR2034 Manual
Læs nedenfor 📖 manual på dansk for Philips HR2034 (2 sider) i kategorien Blender. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere
Side 1/2
Congratulations on your purchase and welcome to Philips! To fully
benet from the support that Philips offers, register your product
at www.philips.com/welcome.
Read this user manual carefully before you use the appliance and save it for
future reference.
- Never immerse the motor unit in water or any other liquid, nor rinse it
under the tap. Only use a moist cloth to clean the motor unit.
- Check if the voltage indicated on the appliance corresponds to the local
mains voltage (110-120/127V or 220-230/240V) before you connect
the appliance.
- Do not use the appliance if the plug, the mains cord or other parts are
damaged.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualied persons in
order to avoid a hazard.
- Do not touch the blades, especially when the appliance is plugged in.
The blades are very sharp.
- Never reach into the blender jar with your ngers or an object while
the appliance is running.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- Never let the appliance run unattended.
- If the blades get stuck, unplug the appliance before you remove the
ingredients that block the blades.
- Never use the blender jar to switch the appliance on and off.
- Always unplug the appliance from the mains before you assemble,
disassemble or make adjustments to any of the parts.
- Never use any accessories or parts from other manufacturers or that
Philips does not specically recommend. If you use such accessories or
parts, your guarantee becomes invalid.
- Do not exceed the maximum level indicated on the blender jar.
- Always make sure the lid is properly closed and the measuring cup is
inserted properly before you switch on the appliance.
- Never ll the blender jar with ingredients hotter than 80°C/175°C.
This Philips appliance complies with all standards regarding electromagnetic
elds (EMF). If handled properly and according to the instructions in this
user manual, the appliance is safe to use based on scientic evidence
available today.
This feature ensures that you can only switch on the appliance if you have
properly assembled the blender jar on the motor unit. If the jar is correctly
assembled, the built-in safety lock will be unlocked.
A Motor unit
B 0 = OFF button
C PULSE/QUICK CLEAN button
D Speed buttons (1 to 3)
E Integrated blade unit
F Level indication
G Blender jar
H Lid of blender jar
I Lid opening lever
J Measuring cup
K Spatula
L Filter (HR2034 only)
The blender is intended for:
- Blending uids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks, shakes.
- Mixing soft ingredients, e.g. pancake batter or mayonnaise.
- Pureeing cooked ingredients, e.g. for making baby food.
- You only need to remove the lid for cleaning purposes (Fig. 3).
To prevent spillage, always insert the measuring cup into the lid before you
start processing.
- Do not prepare recipes that contain large quantities of oil or fat.
- Cut solid ingredients into smaller pieces before you put them in the
blender. Do not process a large quantity of dry ingredients at the same
time. Process these ingredients in a series of small batches instead.
- If you are not satised with the results when you blend solid ingredients,
switch off the blender and press the PULSE/QUICK CLEAN button a
few times to let the blender run briey. You can also stir the ingredients
with the provided spatula, as long as it rests on the lid (even when
the blender is running). If you want to use the spatula without resting
it on the lid, switch off the appliance, open the lid and then stir the
ingredients. You can also remove some of the contents of the jar and
process smaller amounts.
- To crush ice cubes, put max. 5 cubes at a time in the jar and press the
PULSE/QUICK CLEAN button a few times. Keep the lid on the jar
during processing.
You can use the lter to obtain extra nely blended sauces, fresh fruit juices
or cocktails. All pips and skins are caught in the lter.
The grooves of the lter and the ribs inside the blender jar help you put the
lter in the right position.
Cut fruits into smaller pieces and soak dried pulses, such as soy beans,
before you process them in the lter.
Make sure the lid is closed and the measuring cup is in the lid. This prevents
pulp and skins from ending up in your drink.
- Particularly when you process large quantities, we advise you not to put
all the ingredients in the lter at the same time. Start to process a small
quantity, let the appliance run for a moment, switch it off and then add
another small quantity.
- To get the best result when you make fruit juices and cocktails, add
approx. 300ml water to 150g fruit. You can also use other liquids, e.g. to
make cocktails.
You can use the spatula to prepare smoothies and other recipes which are
difcult to blend.
All removable parts are dishwaher proof, except for the motor unit.
HR2030: You can order the lter from your Philips dealer.
- Do not throw away the appliance with the normal household waste
at the end of its life, but hand it in at an ofcial collection point for
recycling. By doing this, you help to preserve the environment. (Fig. 18)
If you need service or information or if you have a problem, please visit
the Philips website at www.philips.com or contact the Philips Consumer
Care Centre in your country (you nd its phone number in the worldwide
guarantee leaet). If there is no Consumer Care Centre in your country, go
to your local Philips dealer.
Ingredients:
- 90g dried soy beans
- 600ml water
This chapter lists the questions most frequently asked about the appliance.
If you cannot nd the answer to your question, contact the Customer Care
Centre in your country.
Can I clean
all removable
parts in the
dishwasher?
Yes, except the motor unit. Only clean the motor unit
with a moist cloth.
What does
‘PULSE/QUICK
CLEAN’ mean?
When you press the PULSE/QUICK CLEAN button,
the appliance runs at its highest speed until you
release the button. Use the PULSE/QUICK CLEAN
button when you want to have more control over
the processing jobs. You can also use this button
to quick-clean the blender jar (see chapter ‘Cleaning’).
Can I pour boiling
hot liquids into
the blender jar?
No, let hot liquids cool down to 80°C/175°F to
prevent damage to the jar.
Why does
the motor
produce an
unpleasant
smell during
processing?
It is normal for a new appliance to give off an
unpleasant smell or emit some smoke the rst few
times it is used. This phenomenon stops after you
have used the appliance a few times. If the appliance
has been switched on too long, it may also give off
an unpleasant smell or emit some smoke. In this case,
switch off the appliance and let it cool down for 60
minutes.
The appliance
stopped running
because the
blade unit is
blocked. What
should I do?
Press the OFF button (0) and use a spatula to
dislodge the ingredients that block the blade unit. We
also advise you to process a smaller quantity.
Why does the
fruit juice or soy
milk contain a lot
of pulp or skins?
To prevent pulp and skins from ending up in your
drink, make sure that the lter is properly placed
in the jar. Also make sure the lid is closed and the
measuring cup is inserted in the lid.
HR2034, HR2030
3101_106_0519_1_DFU-Leaflet_A6_v2.indd 1 20-10-11 13:49
Produkt Specifikationer
| Mærke: | Philips |
| Kategori: | Blender |
| Model: | HR2034 |
Har du brug for hjælp?
Hvis du har brug for hjælp til Philips HR2034 stil et spørgsmål nedenfor, og andre brugere vil svare dig
Blender Philips Manualer
10 September 2024
7 September 2024
2 September 2024
2 September 2024
1 September 2024
31 August 2024
31 August 2024
29 August 2024
18 August 2024
24 Juli 2024
Blender Manualer
- Blender DeLonghi
- Blender Sinbo
- Blender Bosch
- Blender SilverCrest
- Blender OBH Nordica
- Blender Sencor
- Blender Krups
- Blender Siemens
- Blender Day
- Blender Wilfa
- Blender GE
- Blender Breville
- Blender Panasonic
- Blender Gorenje
- Blender AENO
- Blender VOX
- Blender Ninja
- Blender Caso
- Blender Concept
- Blender Gastroback
- Blender Steba
- Blender Vitek
- Blender Rommelsbacher
- Blender OK
- Blender AEG
- Blender Electrolux
- Blender Shark
- Blender Braun
- Blender Magimix
- Blender Hotpoint
- Blender Melissa
- Blender Kenwood
- Blender Sage
- Blender Omega
- Blender Korona
- Blender Sanyo
- Blender Grundig
- Blender Witt
- Blender Livoo
- Blender Klarstein
- Blender Bodum
- Blender Tefal
- Blender Trisa
- Blender Princess
- Blender Matsui
- Blender Nedis
- Blender Emerio
- Blender Severin
- Blender Logik
- Blender Hendi
- Blender Bartscher
- Blender Moulinex
- Blender Sunbeam
- Blender Westinghouse
- Blender Hyundai
- Blender Imetec
- Blender AKAI
- Blender TriStar
- Blender Clas Ohlson
- Blender Brandt
- Blender Trevi
- Blender Adler
- Blender Black And Decker
- Blender Camry
- Blender Blaupunkt
- Blender Tomado
- Blender BEKO
- Blender Privileg
- Blender Sandstrøm
- Blender Smeg
- Blender Costway
- Blender Clatronic
- Blender Mesko
- Blender Quigg
- Blender Buffalo
- Blender Proficook
- Blender Noveen
- Blender Medion
- Blender Fagor
- Blender König
- Blender AFK
- Blender Bifinett
- Blender Morphy Richards
- Blender Russell Hobbs
- Blender WMF
- Blender Ariete
- Blender Innoliving
- Blender KitchenAid
- Blender Zelmer
- Blender Bamix
- Blender Boretti
- Blender Vivax
- Blender JML
- Blender George Foreman
- Blender Galanz
- Blender Amica
- Blender Wolf
- Blender Telefunken
- Blender Vitamix
- Blender Cuisinart
- Blender Orbegozo
- Blender Optimum
- Blender Koenig
- Blender Taurus
- Blender Xiaomi
- Blender Exquisit
- Blender Elba
- Blender Schneider
- Blender MPM
- Blender Profilo
- Blender G3 Ferrari
- Blender Gourmetmaxx
- Blender Domo
- Blender Mellerware
- Blender BEEM
- Blender Saro
- Blender Dynamic
- Blender Thomas
- Blender Hamilton Beach
- Blender Ambiano
- Blender Unold
- Blender Bellini
- Blender Nevir
- Blender Ursus Trotter
- Blender Inventum
- Blender Eufy
- Blender Soundcraft
- Blender Fakir
- Blender Swan
- Blender Khind
- Blender Midea
- Blender Laica
- Blender SVAN
- Blender Danby
- Blender Sogo
- Blender Koenic
- Blender Scarlett
- Blender Izzy
- Blender Focus Electrics
- Blender ECG
- Blender Nova
- Blender Solis
- Blender Saturn
- Blender Trebs
- Blender Prixton
- Blender Fritel
- Blender Renkforce
- Blender Eldom
- Blender Maxwell
- Blender H.Koenig
- Blender OneConcept
- Blender Eta
- Blender Turmix
- Blender Bella
- Blender NutriBullet
- Blender Rotel
- Blender Kalorik
- Blender Cecotec
- Blender Cosori
- Blender Baby Brezza
- Blender Solac
- Blender Chefman
- Blender Arnica
- Blender Nostalgia
- Blender Emeril Lagasse
- Blender Tower
- Blender Brentwood
- Blender Continental Edison
- Blender Aurora
- Blender Duronic
- Blender Bestron
- Blender Philco
- Blender Waring Commercial
- Blender TurboTronic
- Blender Arzum
- Blender Kogan
- Blender Oster
- Blender Bourgini
- Blender Ufesa
- Blender Dash
- Blender Comelec
- Blender JTC
- Blender Orava
- Blender Maestro
- Blender Haeger
- Blender Create
- Blender Nutrichef
- Blender Flama
- Blender Kambrook
- Blender Salton
- Blender Heinner
- Blender Nordmende
- Blender King
- Blender Farberware
- Blender Tesco
- Blender Gallet
- Blender Zephir
- Blender Bugatti
- Blender Zeegma
- Blender Grunkel
- Blender Coline
- Blender Imarflex
- Blender Wëasy
- Blender Livington
- Blender Łucznik
- Blender Girmi
- Blender Mia
- Blender Globe
- Blender Esge
- Blender Blendtec
- Blender Kitchen Crew
- Blender Mystery
- Blender InstantPot
- Blender Petra Electric
- Blender Espressions
- Blender Lagrange
- Blender Moa
- Blender WestBend
- Blender Just Perfecto
- Blender AvaMix
- Blender Robot Coupe
- Blender Tribest
- Blender Semak
- Blender Bar Maid
- Blender BioChef
- Blender Vitinni
- Blender Apuro
- Blender Luvele
- Blender Novamatic
- Blender Back To Basics
- Blender Beautiful
- Blender Usha
- Blender Electroline
Nyeste Blender Manualer
20 September 2024
20 September 2024
19 September 2024
18 September 2024
17 September 2024
17 September 2024
17 September 2024
16 September 2024
16 September 2024
16 September 2024