Planet POE-E101 Manual

Planet Wifi repeater POE-E101

Læs nedenfor 📖 manual på dansk for Planet POE-E101 (4 sider) i kategorien Wifi repeater. Denne guide var nyttig for 20 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

- 1 -

- 2 -

- 3 -

- 4 -

- 5 -

- 6 -

- 7 -

- 8 -

Introduction

1.1 Packet Contents

Thank you for purchasing PLANET POE-E101 IEEE

802.3af Power over Ethernet Extender, your Power

over Ethernet Extender package shall contains following

contents:

Check the contents of your package for following parts:

Power over Ethernet Extender x 1

User's Manual x 1

If any of these pieces are missing or damaged, please

contact your dealer immediately, if possible, retain the

carton including the original packing material, and use

them against to repack the product in case there is a

need to return it to us for repair.

1.3 TechnicalSpecication

Model POE-E101

Interfaces

LAN IN

1 x 10/100Base-TX Ethernet with IEEE

802.3af PoE “Data + DC” in Auto

MDI/MDI-X, Auto-negotiation RJ-45

connector

LAN OUT

1 x 10/100Base-TX Ethernet with IEEE

802.3af PoE “Data + DC” out Auto

MDI/MDI-X, Auto-negotiation RJ-45

connector

Power over Ethernet

PoE

Standard IEEE 802.3af Power over Ethernet

PoE Power

Supply Type Mid-Span / Type B

PoE Power

Output 48V DC, 270mA, Max. 13 Watts

Power Pin

Assignment 4/5(+), 7/8(-)

2.2 Ports Connection

IN Port

Connect the PoE IN port from following

802.3af PSE device through a CAT-5e/6

UTP cable:

• PoE Injector

• PoE Injector Hub

• PoE Ethernet Switch

• Previous POE-E101

OUT Port

Connect the PoE OUT port to following

802.3af PD device through a CAT-5e/6

UTP cable:

• PoE IP Camera

• PoE VoIP Phone

• PoE Wireless AP

• PoE Splitter

• Next POE-E101

2.3 LEDDenition:

LED Color Function

PoE IN Green Lights to indicate the port is

providing 48V DC in-line power.

LNK/

ACT Green

Lights

indicate

the

port

is link up.

Blink: indicate that the extender is

actively sending or receiving data

over port.IN

PoE

OUT Green Lights to indicate the port is

providing 48V DC in-line power.

Standards Conformance

Regulation

Compliance FCC Part 15 Class A, CE

Standard

Compliance

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 10/100Base-TX Fast

Ethernet

IEEE 802.3af Power over Ethernet PSE

/ Mid-Span

IEEE 802.3af Power over Ethernet PD /

Mid-Span

IEEE 802.3x Flow Control

Environment

Operating

Temperature:

0 ~ 50 Degree C

Relative Humidity:

0 ~ 95% (non-condensing)

Storage

Temperature:

-40 ~ 85 Degree C

Relative Humidity:

5 ~ 95% (non-condensing)

1.2 Key Features

Complies with IEEE 802.3af Power over Ethernet

Extends the range of PoE an additional 100 meters

(328ft.)

Forwards both Ethernet data and PoE power to

remote device

Auto-detect and protect of PoE equipment from being

damaged by incorrect installation

Multiple units, daisy-chain installation support

No external power cable installation required

Compact size, Wall-mountable design

Plug-and-Play installation

Hardware Specication

Data Rate 10/100Mbps

Switch

Architecture Store-and-Forward

Switch

Throughput 148810pps@64Bytes

Latency 7.840µs

Maximum

Frame Size 1552Bytes

Flow Control Back pressure for Half-Duplex

IEEE

802.3x

Pause

Frame

for

Full-Duplex

LED

Indicators

• 1 x PoE IN (Green)

• 1 x LAN Data (Green)

• 1 x PoE OUT (Green)

Protection ESD (Ethernet) : 6KV (TBD)

Surge (EFT for power) : 6KV (TBD)

Dimension

(W x D x H) 94 x 70 x 26 mm

Weight 215g

Power

Requirement

IEEE 802.3af compliant with voltage

within 44V-56V DC

Power

Consumption 2 Watts (system maximum)

Mechanical Metal / Wall Mountable

Cable TIA/EIA-568, Category 5/5e cable

Hardware Description

2.1 Product Outlook

Hardware Installation

This product provides two different running speeds –

10Mbps, 100Mbps in the same device and automatically

distinguishes the speed of incoming connection.

This section describes the hardware features of

POE-E101. Before connecting any network device to the

POE-E101, read this chapter carefully.

3.1 Before Installation

Before your installation, it is recommended to check

your network environment. If there is any far away IEEE

802.3af devices need to power on, the POE-E101 can

provide you a way to supply power for this Ethernet

device conveniently and easily.

The POE-E101 is installed between the PSE (Power Source

Equipment) and the PD (Powered Device); it is powered

by PSE and forwards the Ethernet data and remaining

POE power to the PD. The POE-E101 doesn’t require

an external power supply and it can be installed easily

just plug and play; that means the operator does not

need to congure the POE-E101. The POE-E101 injects

power to the PDs without affecting the data transmission

performance. It offers a cost effective and quick solution

to extend power and data an additional 100m.

Note

The POE-E101 can be installed with third-party

device if the device complied with IEEE 802.3af

standard.

Produkt Specifikationer

Mærke:	Planet
Kategori:	Wifi repeater
Model:	POE-E101
Type:	Netværkssender & -modtager
Bredde:	94 mm
Dybde:	70 mm
Højde:	26 mm
Vægt:	215 g
Produktfarve:	Blå
Opbevaringstemperatur (T-T):	-10 - 85 °C
Relativ luftfugtighed ved drift (H-H):	0 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	2
Strømforbrug (typisk):	2 W
Driftstemperatur (T-T):	0 - 50 °C
Husmateriale:	Metal
Certificering:	FCC Part 15 Class A, CE
Kabelteknologi:	10/100Base-T(X)
Netværksstandarder:	IEEE 802.3, IEEE 802.3af, IEEE 802.3u, IEEE 802.3x
LED-indikatorer:	LAN, PoE
Monteringstype:	Væg
Plug and play:	Ja
Maksimal overførselsafstand:	300 m
Strøm over Ethernet (PoE):	Ja
Dataoverførselshastighed:	100 Mbit/s
Understøttede kabeltyper:	Cat5, Cat5e, Cat6
Auto MDIX IEEE:	Ja
Duplex system:	Fuld