PolyJohn PSW1-2000 Manual

PolyJohn Wasmachine PSW1-2000

Læs nedenfor 📖 manual på dansk for PolyJohn PSW1-2000 (9 sider) i kategorien Wasmachine. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/9
PC-100421 Drain Plug- March 2015
Page 1 of 4
PC-100421 Drain Plug- March 2015
Page 2 of 4
Drain Plug
Replacement
Instructions
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
info@polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
sales@polyjohn.co.uk
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
This drain plug can be used in any holding tank or sink in which a drain is
needed. The opening of the drain is almost 4 times larger than the standard
1/2” drain which means that your sink can drain about 4 times faster. This
drain can be tted directly where a 1 drain plug currently is or in any
accessable at spot in a holding tank or sink. It uses a simple quarter turn
locking feature which makes draining the sink faster and easier.
General Overview
Step 1: If adding this drain to a sink that currently has a 1/2” drain plug, locate
a  at area where there is enough space to put the 1” uniseal (2-1/2’ Diameter).
The recommended locations for PolyJohn sinks are located below.
Installation
~~Tools Required~~
• Drill with 1-3/4” Hole Saw • Razor Knife
PC-100421P - Drain Plug
PC-000241 - O-Ring
PC-100421B - Drain Plug Body
PC-000418 - 1” Uniseal
Step 2: Using a drill with a 1-3/4” hole saw, drill a hole in the location where
the new drain plug is to be located. Clean any burrs or shavings o of the edge
of the hole.
Step 2: If replacing a 1” drain plug as used on the Applause and Bravo sinks,
remove the drain plug and drill over the spinweld using a drill with a 1-3/4 hole
saw as shown in the picture below. Clean any burrs or shavings o of the edge
of the hole. NOTE: The fresh water drain plug on the Applause sink cannot be
replaced with this drain plug.


Produkt Specifikationer

Mærke: PolyJohn
Kategori: Wasmachine
Model: PSW1-2000

Har du brug for hjælp?

Hvis du har brug for hjælp til PolyJohn PSW1-2000 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Wasmachine PolyJohn Manualer

Wasmachine Manualer

Nyeste Wasmachine Manualer

AEG

AEG L9WEN066CB Manual

16 September 2024
AEG

AEG Lavamat Special 8 Manual

16 September 2024
AEG

AEG LFR61G814O Manual

16 September 2024
Hoover

Hoover HBD 495D2E/1-80 Manual

16 September 2024
Indesit

Indesit EWDC 6145 W DE Manual

16 September 2024
Hoover

Hoover DYN 11146P8CH Manual

16 September 2024
Zanussi

Zanussi ZWG 7140 AP Manual

16 September 2024
Polar

Polar PFL 1005 Manual

16 September 2024
Balay

Balay 3TS973BE Manual

16 September 2024