PolyJohn PSW1-2100 Manual

PolyJohn Wasmachine PSW1-2100

Læs nedenfor 📖 manual på dansk for PolyJohn PSW1-2100 (2 sider) i kategorien Wasmachine. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
PC-100421 Drain Plug- March 2015
Page 1 of 4
PC-100421 Drain Plug- March 2015
Page 2 of 4
Drain Plug
Replacement
Instructions
POLYJOHN
USA
PolyJohn Enterprises Corp
2500 Gaspar Ave.
Whiting, IN 46394
Phone: 800-292-1305
Fax: 219-659-0625
www.polyjohn.com
info@polyjohn.com
POLYJOHN
WORLDWIDE
PolyJohn (UK) Ltd.
Equinox 1 Audby Lane
Wetherby, England LS22 7RD
Phone: 44 (0) 1937-583333
Fax: 44 (0) 1937-583322
sales@polyjohn.co.uk
POLYJOHN
CANADA
PolyJohn Canada
P.O. Box 2300
199 Forest Plain Rd.
Orillia, Ontario LV3 6S2
Phone: 800-465-9590
Fax: 705-325-8250
info@polyjohncanada.ca
This drain plug can be used in any holding tank or sink in which a drain is
needed. The opening of the drain is almost 4 times larger than the standard
1/2” drain which means that your sink can drain about 4 times faster. This
drain can be tted directly where a 1 drain plug currently is or in any
accessable at spot in a holding tank or sink. It uses a simple quarter turn
locking feature which makes draining the sink faster and easier.
General Overview
Step 1: If adding this drain to a sink that currently has a 1/2” drain plug, locate
a  at area where there is enough space to put the 1” uniseal (2-1/2’ Diameter).
The recommended locations for PolyJohn sinks are located below.
Installation
~~Tools Required~~
• Drill with 1-3/4” Hole Saw • Razor Knife
PC-100421P - Drain Plug
PC-000241 - O-Ring
PC-100421B - Drain Plug Body
PC-000418 - 1” Uniseal
Step 2: Using a drill with a 1-3/4” hole saw, drill a hole in the location where
the new drain plug is to be located. Clean any burrs or shavings o of the edge
of the hole.
Step 2: If replacing a 1” drain plug as used on the Applause and Bravo sinks,
remove the drain plug and drill over the spinweld using a drill with a 1-3/4 hole
saw as shown in the picture below. Clean any burrs or shavings o of the edge
of the hole. NOTE: The fresh water drain plug on the Applause sink cannot be
replaced with this drain plug.


Produkt Specifikationer

Mærke: PolyJohn
Kategori: Wasmachine
Model: PSW1-2100

Har du brug for hjælp?

Hvis du har brug for hjælp til PolyJohn PSW1-2100 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Wasmachine PolyJohn Manualer

Wasmachine Manualer

Nyeste Wasmachine Manualer