Proscan PSP8333-BLACK Manual

Proscan Højttaler PSP8333-BLACK

Læs nedenfor 📖 manual på dansk for Proscan PSP8333-BLACK (2 sider) i kategorien Højttaler. Denne guide var nyttig for 2 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

MODEL NO. PSP833-BLACK

PLEASE READ BEFORE OPERATING THIS EQUIPMENT

PROSCAN™ IS A REGISTERED TRADEMARK OF TECHNICOLOR USA INC.

AND USED UNDER LICENSE TO CURTIS INTERNATIONAL LTD.

INSTRUCTION MANUAL

PORTABLE TRUE WIRELESS

BLUETOOTH SPEAKER

1234

65 7

Getting Started

● Remove the product from the box.

● Remove any packaging from the product.

● Please retain all packaging after you have checked and counted all the parts and the

contents against the list.

Package Contents

● 2pcs Bluetooth Speakers

● 2pcs micro USB Charging Cable

● 1pc LINE IN Cable

● Instruction Manual

Features

● Portable True Wireless Bluetooth Speaker

● Double up your music beats with this Portable True Wireless Speaker, turn them on

and pair with each other wirelessly.

● Connect with your mobile device and stream wireless true wireless music – double

sound output than traditional speaker

● Wirelessly connect both speakers for true right & left stereo play back

● Works independently or together as paired true wireless speaker

● Built-in magnet at the bottom that sticks to each other

● Wireless range up to 10 meter

Safety Instructions

1. Keep the unit away from heat source, direct sunlight, humidity, water and any other

liquids.

2. Do not operate the unit if it has been exposed to water, moisture or any other liquids to

prevent against electric shock, explosion and/or injury to yourself and damage to the

unit.

3. Do not use the unit if it has been dropped or damaged in any way.

4. Repairs to electrical equipment should only be performed by a qualified electrician.

proper repairs may place the user at serious risk.

not use the unit with wet hands.

not put objects into any of the openings.

ep the unit free from dust, lint etc.

9. Do not use this unit for anything other than its intended use.

10. Keep the unit out of reach of children.

11. This product is not a toy.

12. Do not use the headset at excessive volume levels, as damage to hearing may occur.

Any Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired

operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

• This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment .This equipment should be installed and operated with

minimum distance 20cm between the radiator& your body.

• This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

1 LED INDICATOR

2. / SOURCE Button

3. SCAN Button

4. DC IN Jack (charging port)

5. LINE IN Jack

6. Built-in Microphone

7. Built-in magnet on bottom to suck 2 units together

Charging the speaker

The speaker has built-in rechargeable battery. When the battery is drained out, speaker

would turn OFF automatically. Please recharge the battery every time when it drains out.

Plug the Micro USB end of the included USB rechargeable cable into the charging port.

Plug the other end into a USB port on your computer or other devices made for USB

charging. Red LED light illuminates indicating that the device is being charged.

It takes about 2 hours to fully charge the speaker. Once the speaker is fully charged, Red

LED Light would turn OFF.

Please charge it completely before the first time use.

Power on/off the Bluetooth Speaker

Press and hold the / SOURCE button for 2-3 seconds to power ON/OFF the unit.

FCC Warning

For service assistance and product information,

please call: 1-800-968-9853.

Pour obtenir assistance et information appelez:

1-800-968-9853.

Curtis International Ltd.

7045 BECKETT DRIVE, UNIT 15,

MISSISSAUGA, ON, L5S 2A3

www.curtisint.com

LOCATION OF CONTROL

Activate the TWS pairing function:

1. Press and hold the / SOURCE button on each Speakers for 2-3 seconds to power

ON the unit. An indication tone will be heard and blue LED indicator will flash for

pairing.

2. After few seconds, both Speakers will pair together with another indication tone. The

LED light indicator on the host Speaker will flash blue rapidly, while the subordinate

Speaker LED light stay on.

3. At this point, activate the Bluetooth function on your mobile device, and search for

Bluetooth devices near you. Your mobile device should show one of “Pro PSP833”

instead of two in list, (This is the host Speaker. The reason you do not see subordinate

Speaker in the list of available devices is that it is already paired with the host

Speaker). Choose it to start the TWS pairing function.

4. Once paired successfully, an indication tone will be heard and the LED on the host

Speaker will light stay on.

Note: If both speakers pair unsuccessfully, power off both speaker and wait for a while to

power on both again

Please ensure that your device (iPhone, Tablet or Other Smart Phone) is paired with the

Bluetooth Speakers to stream music wirelessly. Once it is paired, play music from your

device.

Note: Other functions including volume increase/decrease, next/previous track, you may

need to control through your source device.

INSTRUCTONS FOR USE

1 2 3 4 5 6

Connecting two Speakers and a Bluetooth device for TWS pairing function

Making a call with the Bluetooth Speaker in TWS pairing mode

Listening to Music Wirelessly in Stereo pairing mode

Function

Answer incoming call

End call

Reject call

Operation

Incoming Call

Button

Short press the / SOURCE button of one

Speaker to answer an incoming call.

After your phone conversation, short press the

/ SOURCE button of one Speaker.

Long press the / SOURCE button 2-3

seconds on host Speaker.

Function

Pause

Play

Operation

Playing music

Pausing

Button

Short press the / SOURCE button of one

Speaker will pause the music

Short press the / SOURCE button of one

Speaker will resume the music.

Basic operation

Note:

1. Only host Speaker supports phone conversations

2. The host speaker is the left channel after paired with each other.

1. Ensure the Bluetooth Speaker is turned off, press and hold the / SOURCE button for

2-3 seconds to turn on, you would hear an indication tone and blue LED flashes rapidly.

2. Place the Bluetooth Speaker and Bluetooth device (phone or tablet that support call

answering) no further than 1 meter apart from each other;

3. Activate the Bluetooth function on your mobile device, please refer to the

manufacturer’s instructions for instructions on enabling Bluetooth on your device.

4. Once you have activated Bluetooth on your mobile device, select the “Pro PSP833”

from the list of available Bluetooth devices.

5. If required, enter the password “0000”confirm & finalize pairing。

6. Once paired successfully, another indication tone will be heard and the blue LED will

stay on.

7. You can now start to use the Speaker.

8. If pairing is unsuccessful, turn off the device first and then re-pair following the above

steps

9. Once you have paired the Bluetooth Speaker with a mobile device, the Speaker will

remember this mobile device and will pair automatically when its Bluetooth is activated

within the range, during subsequently pairing. You do not need to re-pair any previously

connected device.

10. The Bluetooth Speaker will attempt to automatically connect to the last device it was

paired with when switched on. If you want to pair it with a new device, please follow the

steps outlined above.

Pairing either one Bluetooth Speaker with Bluetooth devices

(phone or tablet that support call-answering)

1. Press and hold the / SOURCE button for 2-3 seconds to power ON speaker.

2. Press the / SOURCE button twice to select radio mode.

3. Press and hold SCAN button for 2-3 seconds to auto scan the available radio station

from the FM band. When the station is being received, unit will stop scanning a while

and store the station in the memory and then carry on until finish the scanning. Unit will

stop in the last available radio station.

4. If you want to listen another available station, press SCAN button once to recall next

available radio station from the memory. Repeat press SCAN button, you can listen to

different stations

5. If you want to mute the sound, press the / SOURCE button once.

6. To resume the sound, press the / SOURCE button once again.

TIPS FOR BEST RADIO RECEPTION

Plug in a micro USB charging cable in DC IN jack as an antenna for the radio and must be

fully extended for best reception.

Specifications are typical, individual units might vary. They are subject to continuous

improvement without notice and without incurring any obligation.

(Note: Battery life & charging time may vary based on usage & types of devices used.)

Bluetooth specification

Operating distance

Working time

Charging input voltage

Charging time

Speaker output

Built-In Battery

Size

Weight

Bluetooth 5.0

10 meter

Up to 2 hours (moderate volume)

DC 5V

About 2 hours

3W (each)

500mAh (each)

64.5x 63x 89 mm (each)

216g (each)

RADIO OPERATION

FOR EITHER ONE SPEAKER

Play music through “Line in (Auxiliary)” mode

1. Press and hold the / SOURCE button for 2-3 seconds to power ON speaker.

2. Insert one end of the LINE IN cable (included) into the LINE IN port, an indication tone

will be heard, and the other end to the audio device (such as phone /MP3 Player /

computer / tablet / …etc.).

3. Select your favorite song at the source device to play.

Note:

1. Play, Pause, Skip Forward, Skip Backward, Volume Increase/decrease can only be

controlled through the source devices, while playing music in LINE IN (Auxiliary) mode.

2. When inserted the LINE IN cable to this product, it will be disconnected the Bluetooth.

Care and Maintenance

Read the following recommendations before using the Bluetooth Speakers. Following these

you will be able to enjoy the product for many years.

1. Do not expose the Bluetooth Speakers to liquid, moisture or humidity to avoid the

product’s internal circuit being affected.

2. Do not use abrasive cleaning solvents to clean the device.

3. Do not expose the device to extremely high or low temperature as this will shorten the

life of electronic devices, destroy the battery or distort certain plastic parts.

4. Do not dispose of the device in a fire as it will result in an explosion.

5. Don not expose the device to contact with sharp objects as this will cause scratches

and damage.

6. Do not let the device fall on the floor. The internal circuit might get damaged.

7. Do not attempt to disassemble the device as it may get damaged if you are not

professional.

PLAY MUSIC THROUGH “LINE IN (AUXILIARY)” MODE

FOR EITHER ONE SPEAKER

Please ensure that your device (iPhone, Table or Other Smart Phone) is paired with the

Bluetooth Speaker to stream music wirelessly. Once it is paired, play music from your

device.

Note: Other functions including volume increase/decrease, next/previous track, you may

need to control through your source device.

Making a call with the Bluetooth Speaker in Bluetooth mode

SPECIFICATIONS

Listening to Music Wirelessly

Function

Answer incoming call

End call

Reject call

Operation

Incoming Call

Button

Short press the / SOURCE button to

answer an incoming call.

After your phone conversation, Short press

the / SOURCE button

Long press the / SOURCE button 2-3

seconds to reject the incoming call.

Function

Pause

Play

Operation

Playing music

Pausing

Button

Short press the / SOURCE button will

pause the music

Short press the / SOURCE button will

resume the music

Basic operation

To make a warranty claim, please email support@curtiscs.com or call

1-800-968-9853.

90 day Warranty

This product is warranted to be free from defects in material and workmanship for a

period of ninety (90) days from the date of original purchase. During this period, your

exclusive remedy is repair or replacement of this product or component found to be

defective, at our option; however, you are responsible for all costs associated with

returning the product to us. If the product or component is no longer available, we

will replace with a similar one of equal or greater value. Prior to a replacement being

sent, the product must be rendered inoperable or returned to us.

This warranty does cover glass, filters, wear from normal use, use not in not

conformity with the printed directions., or damage to the product resulting from

accident, alteration, abuse, or misuse. This warranty extends only to the original

consumer purchaser or gift recipient. Keep the original sales receipt, as proof of

purchase is required to make a warranty claim. This warranty is void if the product

is used for other than single-family household use or subjected to any voltage and

waveform other than as on the specified rating on the label (e.g., 120V~60Hz).

We exclude all claims for special, incidental, and consequential damages caused by

breach of express or implied warranty. All liability is limited to the amount of the

purchase price. Every implied warranty, including any statutory warranty or

condition of merchantability or fitness for a particular purpose, is disclaimed

except to the extent prohibited by law, in which case such warranty or

condition is limited to the duration of this written warranty. This warranty gives

you specific legal rights. You may have other legal rights that vary depending on

where you live. Some states or provinces do not allow limitations on implied

warranties or special, incidental, or consequential damages, so the foregoing

limitations may not apply to you.

For faster service, locate the model, type, and serial numbers on your appliance.

ATTACH YOUR PROOF OF PURCHASE HERE, PROOF OF PURCHASE IS

REQUIRED TO OBTAIN WARRANTY SERVICE.

Please have the following information available when you contact the Support

Team:

• Name, address and telephone number.

• Model number and serial number.

• A clear, detailed description of the problem.

• Proof of purchase including dealer or retailer name, address and date of

purchase.

Produkt Specifikationer

Mærke:	Proscan
Kategori:	Højttaler
Model:	PSP8333-BLACK

Har du brug for hjælp?

Hvis du har brug for hjælp til Proscan PSP8333-BLACK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Proscan Manualer

Proscan PSP8333-BLACK Manual

4 Marts 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Sonance Invisible Series IS10W Manual

3 Marts 2025

Bogen MB8TSL(VR) Manual

1 Marts 2025

1 Marts 2025

1 Marts 2025

1 Marts 2025

1 Marts 2025

1 Marts 2025

1 Marts 2025

Bogen CSD2X2U-V2 Manual

1 Marts 2025

Bogen AMBSL1 Manual

1 Marts 2025