Really Right Stuff BH-30 Manual


Læs nedenfor 📖 manual på dansk for Really Right Stuff BH-30 (2 sider) i kategorien Stativ. Denne guide var nyttig for 5 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
OPERATION
Attach the BH-30 to Tripod
1. Tighten the Pan Lock Knob to lock the Panning Base.
NOTE: Suicient lockup of both the pan and the ball can
be achieved with light to medium torque. Overcranking
the pan lock knob will result in unwanted drag on the ball.
2. Screw the ballhead onto the ”-16 threaded stud on the top of the 
tripod (stud should not protrude more than above platform or 
5-6 threads). Tighten the ballhead onto the tripod snugly, but do not
over-torque or it will be diicult to remove.
Set Up Your Tripod
Set up your tripod to match the required camera position.
Orient the Ballhead
Loosen the Pan Lock Knob and rotate the body of the BH-30 ballhead so
that you may operate the Main Lock Knob with your le hand while your
right hand is free to operate the camera controls. Tighten Pan Lock Knob
to secure the orientation.
1
2
Right Hand
Left Hand
Orient the Quick-Release Clamp
1.
Camera Body Plates & L-Plates:
For quick-release plates with le/right dovetail orientation, orient
your clamp as illustrated:
2.
Lens Plates & Rails:
For quick-release plates with fore/a or bidirectional dovetail
orientation, orient your clamp as illustrated:
As you adopt a procedure that works for you, it’s best to
practice that working mode consistently until it becomes
second nature. This will save you time in the field and help
avoid costly mistakes. Seasoned pros are able to setup
and shoot literally within seconds.
Lever Release Screw-Knob
Lever Release Screw-Knob
Using the Drop Notch
1.
Loosen the Pan Lock Knob and rotate the body 90º counter clockwise.
Retighten Pan Lock Knob.
2. Fully seat camera into the drop notch.
Using the Main Lock T-Lever
® ,, © 1990-2017 Really Right Stuff, LLC. All rights reserved.
The Main Lock T-Lever is longer on one
end. This design makes it easy to turn
the lever and apply enough pressure
to solidly lock the head. In some
instances, though, the long end of the
lever may hit the tripod platform or
even the clamp. That’s why we made
the main lock T-Lever spring loaded and
re-positionable:
1. Pull the T-Lever out.
2.
Rotate T-Lever to a new position.
The T-Lever actually drives an
internal six-sided hex nut, so
there are 6 possible positions
for the T-Lever.
3.
Allow T-Lever to snap into place.


Produkt Specifikationer

Mærke: Really Right Stuff
Kategori: Stativ
Model: BH-30

Har du brug for hjælp?

Hvis du har brug for hjælp til Really Right Stuff BH-30 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Stativ Really Right Stuff Manualer

Stativ Manualer

Nyeste Stativ Manualer

REVO

REVO AC-GRB Manual

11 December 2024
REVO

REVO AC-MUSIC Manual

11 December 2024
Moza

Moza AirCross S Manual

11 December 2024
Cartoni

Cartoni Focus 10 Manual

11 December 2024
Cartoni

Cartoni Master 40 Manual

11 December 2024
Cartoni

Cartoni Master 30 Manual

11 December 2024
Cartoni

Cartoni Magnum Manual

11 December 2024
Cartoni

Cartoni Maxima 5.0 Manual

11 December 2024
Cartoni

Cartoni Master M111 Manual

10 December 2024