Really Right Stuff BPC-16 Manual


Læs nedenfor 📖 manual på dansk for Really Right Stuff BPC-16 (3 sider) i kategorien Stativ. Denne guide var nyttig for 10 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/3
MAINTENANCE
General Care
Keep ball free of dust and grit. Do not attempt to disassemble the
BPC-16.
Clamp Maintenance
Our clamp delivers a lifetime of wear. However, from time to time,
we recommend placing a drop of lubricant on the shaft to prevent
binding. If you find that your clamp is not closing as smoothly as it
used to, unscrew the knob to fully open the clamp and turn it upside
down. Blow out any dirt or grit, and place a drop of lubricant on the
threads.
GUARANTEE
ALL REALLY RIGHT STUFF BRAND PRODUCTS ARE GUARANTEED
TO THE ORIGINAL PURCHASER TO BE FREE OF DEFECTS IN
MATERIALS OR WORKMANSHIP FOR FIVE (5) YEARS FROM THE
DATE OF PURCHASE. PRODUCTS WILL BE REPAIRED OR REPLACED
AT OUR OPTION.
® , ™, © 1990-2018 Really Right Stu, LLC. All rights reserved. Comes with stud, ” hex key, T8 Torx¼-20
BPC-16
PANNING MICRO BALL
PATENT PENDING
1146 Farmhouse Lane, San Luis Obispo, CA 93401 USA
1-805-528-6321 | 1-888-777-5557
www.ReallyRightStu.com
SPECIFICATIONS:
Weight: ............................................................................4.4 ounces (125g)
Height: ........................................................2” overall, 1.85added height
Load Capacity: 5 pounds (2.3kg) .................................................................
Tripod Mount: female ¼”-20 socket ............................................................
Ball Articulation: ±45°, 9 notch ................................................................
Panning Base: increments, zero to 360° ................................................
Optional Mount Stud: 1/4”-20 x 1/2” ...........................................................
Ball Diameter: .................................................................................... 16mm
Stem Base Diameter: ........................................................................ 0.725
Tension Adjustment: via ball clamp lever ..................................................
Locking Mechanism:..................................nested jaw & pan lock knobs
PATENT PENDING


Produkt Specifikationer

Mærke: Really Right Stuff
Kategori: Stativ
Model: BPC-16

Har du brug for hjælp?

Hvis du har brug for hjælp til Really Right Stuff BPC-16 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Stativ Really Right Stuff Manualer

Stativ Manualer

Nyeste Stativ Manualer