Rock N Roller R14G Manual


Læs nedenfor 📖 manual på dansk for Rock N Roller R14G (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 3 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
R14G Mo d el Specif ica t i o ns Your Roc knRoller Multi-Car t shipp ing b ox should
contain a f r ame and t h e f ollo wing par ts: Reco m mend e d To o ls Fo r Asse m bly
Length (Compact) 42 2 x ½” lock nuts
Length (Extended) 2 x ½” at washer60 Channel Lock Pliers
(not included)
Width (Frame Bed) 2 x x 1 ¼ cotter pins15 1/8
Width (Rear Wheels) 20 2 x 20mm flat washers
Height (Folded) 2 x 8"x 3" (200mm x 75mm) rear wheels10
Height (Unfolded) 2 x 6"x 3" (150mm x 75mm) stem casters38
Front Casters 6” x 3 1 x Flat Wrench
Rear Wheels 8” x 3 1 x Assembly/instruction sheet
Weight 36 lbs.
Load Capacity 700 lbs.
1. Installing Rear Wheels
Gently slide wheel over axle as shown.
Do not force wheels onto axle. It is
recommended to lubricate axles with light
grease before installing. Install cotter pins
and bend ends outward.
2. Installing Front Swivel Casters
Attach front swivel casters as shown. While tightening lock nuts, grip
bearing cap with channel lock pliers or pipe wrench to prevent threaded
stem from turning. Tighten lock nuts rmly, but not excessively tight.
Check lock nut tightness on caster stems periodically.


Produkt Specifikationer

Mærke: Rock N Roller
Kategori: Ikke kategoriseret
Model: R14G

Har du brug for hjælp?

Hvis du har brug for hjælp til Rock N Roller R14G stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Rock N Roller Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer