Rock N Roller R6RT Manual


Læs nedenfor 📖 manual på dansk for Rock N Roller R6RT (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 4 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
R6RT Mo del Spec i f ications Your Roc knRo ller Multi- Ca r t s h ip p ing bo x s ho uld
contain a f r am e and the f ollowing pa r ts : Reco m me nd e d To ols Fo r Assem b ly
Length (Compact) 28 2 x ½” at washers
Length (Extended) 2 x ½” lock nuts42.5 Channel Lock Pliers
(not included)
Width (Frame Bed) 1 x 1” (25 mm) square plastic endplugs12.5
Width (Rear Wheels) 18 1 x ¾” (20 mm) square plastic endplugs
Height (Folded) 2 x x 1 ¼ cotter pins9.5 1/8
Height (Unfolded) 2 x 20 mm at washer33.25
Front Casters 4” x 1 2 x 8”x 2” (200 mm x 64 mm) rear wheels
Rear Wheels 8” x 2.5 2 x 4”x 1” (100 mm x 25 mm) stem casters
Weight 22 lbs. 1 x Flat Wrench
Load Capacity 500 lbs. 1 x Assembly/instruction sheet
1. Installing Rear Wheels
Gently slide wheel over axle as shown.
Do not force wheels onto axle. It is
recommended to lubricate axles with light
grease before installing. Install cotter pins
and bend ends outward.
2. Installing Front Swivel Casters
Attach front swivel casters as shown. While tightening lock nuts, grip
bearing cap with channel lock pliers or pipe wrench to prevent threaded
stem from turning. Tighten lock nuts rmly, but not excessively tight.
Check lock nut tightness on caster stems periodically.


Produkt Specifikationer

Mærke: Rock N Roller
Kategori: Ikke kategoriseret
Model: R6RT

Har du brug for hjælp?

Hvis du har brug for hjælp til Rock N Roller R6RT stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Rock N Roller Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer