Römer Max-Fix Manual

Römer Bilsæde Max-Fix

Læs nedenfor 📖 manual på dansk for Römer Max-Fix (2 sider) i kategorien Bilsæde. Denne guide var nyttig for 33 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

01 02

13 19

CARE AND MAINTENANCE Please observe the instructions on the use of child restraint systems described

in your vehicle owner’s manual.

The seat may be used in all vehicles equipped with the ISOFIX anchoring

systems. Please consult your vehicle owner’s manual for information the seats

which are approved for child safety seats in the weight class 0-18 kg.

The fastening with ISOFIX and support leg is based on semiuniversal approval.

The seat may be used only in those vehicles cited in the enclosed vehicle type

list. This type list is constantly updated. The latest version can be obtained from

us or from www.britax.eu / www.roemer.eu.

You can use your child car seat as follows:

NEXT CHILD SAFETY SEATS

USE IN THE VEHICLE

PRODUCT OVERVIEW

Shoulder pads

Harness buckle

Headrest

Cover

ISOFIX insert guides

ISOFIX attachement points (car) Shoulder straps

ISOFIX indicators

Recline wheel

Adjustment strap

Adjusting button Release button

Fabric loop

Locking arms

Support leg

Support leg indicator

Adjustment buttons

TWO-YEAR WARRANTY

For this child safety seat we offer a 2-year warranty against manufacturing or

material defects. The warranty period is effective from the day of purchase.

The warranty covers only child safety seats which have been handled properly

and which have been sent to us in a clean and proper condition.

The Warranty does not cover:

• natural signs of wear and damage resulting from excessive stress

• damage resulting from inappropriate or improper use

What is covered by the warranty?

Fabrics: All of our fabrics meet very high requirements with regard to colour

fastness when exposed to UV radiation. Nevertheless, all fabrics fade when

exposed to UV radiation. This is not a material defect, but rather a normal sign

of wear which is not covered by the warranty.

Buckle: Buckle malfunctions are often due to accumulations of dirt or foreign

bodies which may stop the buckle from working properly. If this happens, the

buckle can be cleaned, olease follow the procedure described in your user

instructions.

Please contact your retailer immediately in the event of a warranty claim. He or

she will give you the advice and support you need. When processing claims,

product-specic depreciation rates will be applied. Please refer to our General

Terms and Conditions which are available from your retailer.

Use, care and maintenance

The child safety seat must be used in accordance with the user instructions.

We point out expressly that only genuine accessories and replacement parts

must be used.

To ensure the full protective effect of the child safety

seat:

• In the event of an accident with an impact speed above 10

km/h it is possible that the child safety seat may have been

damaged, but that the damage may not be immediately obvi

ous. In this case the child safety seat must be replaced.

Please dispose of it properly.

• Regularly check all important parts for damage. Make sure

that the mechanical components in particular are all in per-

fect working order.

• To prevent damage, ensure that the child safety seat does

not become jammed between hard objects (car door, seat

runners etc.).

• Always have the child safety seat checked if it has been

damaged (e.g. if it is dropped).

• Never lubricate or oil parts of the child seat.

• In order to properly protect your child, it is imperative that

you install and use the MAX-FIX exactly as described in this

manual.

Please observe the waste disposal regulations in your country.

CARE INSTRUCTIONS

Disposal of packaging Container for cardboard

Cover Residual waste, thermal utilisation

Plastic parts In accordance with the labelling in the

designated container

Metal parts Container for metals

Harness straps Container for polyester

Buckle &latch Residual waste

In the direction of travel No

On seats featuring:

ISOFIX attachments (between seat surface and

backrest)

Yes 1)

1) If there is a front airbag: Slide the passenger seat a long way back and refer to any

instructions in vehicle owner’s manual.

(Please observe the applicable regulations in your country)

BRITAX RÖMER

child safety seat

Tested and certied ac-

cording to ECE* R 44/04

Group Body weight

MAX-FIX 0+ & 1 0 to 18 kg

• -The child safety seat has been designed, tested and certied according to the requirements of the Euro

pean Standard for Child Safety Equipment (ECE R 44/04). The test mark E (in a circle) and the certica-

tion number are located on the orange certication sticker (sticker on the child safety seat).

• This certication will be invalidated if you make any modications to the child safety seat.

• The MAX-FIX child safety seat must only be used to secure your child in the vehicle. It must never be

used as a seat or toy in the home.

• Risk of injury due to unauthorised modications! Unauthorised technical modications may reduce or

entirely void the seat´s protective properties.

- Do NOT make any technical modications to the baby seat.

- Use the baby seat only as described in the user instructions.

*ECE = European Standard for Child safety Equipment

Care for the harness buckle

It is vital for the safety of your child that the harness buckle works correctly.

Malfunctions of the harness buckle are usually caused by accumulations of dirt

or foreign bodies. Malfunctions are as follows:

• The buckle latches are ejected only slowly when the red release button is

pressed.

• The buckle latches will no longer lock home (i.e. they are ejected again if you

try to push them in).

• The buckle latches engage without an audible „click“.

• The buckle latches are difcult to insert (you feel resistance).

• The buckle only opens if extreme force is applied.

Remedy

wash out the harness buckle so that it functions properly once again:

Cleaning the harness buckle

1. Open the harness buckle 07 (press the red button).

2.Turn the recline wheel

and move the seat shell 26 upwards into the most

reclined position.

3. Grasp under the seat shell 26 and slide the metal plate 24 which is used to

fasten the harness buckle 07 to the seat shell up on its edge through the

strap slot 25 .

4. Soak the harness buckle 07 in warm water with dishwashing liquid for at

least an hour. Then rinse and dry it thoroughly.

Cleaning the cover

Please be sure to use only genuine Britax/RÖMER replacement seat covers,

as the seat cover is an integral part of the child safety seat which plays an

important role in ensuring that the system works properly. Replacement

seat covers are available from your retailer.

• The child seat must not be used without its cover.

• The cover can be removed and washed with a mild detergent using the

washing machine‘s cycle for delicate items (30 °C). Please observe the

instructions on the washing label of the cover.

• The plastic parts can be cleaned using soapy water. Do not use harsh

cleaning agents (such as solvents).

• The harnesses can be washed in lukewarm soapy water.

• The shoulder pads can be washed in lukewarm soapy water.

Caution: Never remove the buckle latches 21 from the straps.

Caution: The child seat must not be used without the seat cover.

Removing the cover

1. Turn the recline wheel

and move the seat shell 26 downwards into the

upright position.

2. Loosen the harness straps as far as possible.

3. Open the harness buckle 07 (press the red button).

4. Slide the headrest 04 to its lowest position.

6. Remove the cover of the headrest 04.

7. Open the poppers on the left and right of the rear part of the cover.

8. Fold the rear part of the cover onto the seat surface.

9. Thread the harness straps through the cutout in the cover.

10. Unhook the elastic seam of the cover under the edge of the seat shell.

TIP: Start at the handles on the side and at the upper edge of the seat shell.

11. Pull the cover up and over the bezel of the strap adjuster.

12. Feed out the harness buckle 07 and the end of the strap from the cover.

13. Pull the cover upwards a little and then put it with the cutout over the head-

rest 04 .

Re-tting the Cover:

Simply follow the steps in the opposite order.

Caution: Check that the harness straps are not twisted and that they

have been correctly inserted in the belt slots on the cover.

Storage compartment

MAX-FIX base

BRITAX RÖMER Child safety seats Testing and certication

in accordance with ECE R 44/04

Rearward facing Forward facing Group Body weight

MAX-WAY 1 2 – 9 – 25 kg

MULTI-TECH 2 1 2 – 9 – 25 kg

KIDFIX /KIDFIX SICT 2 3 – 15 – 36 kg

KID / KID plus 2 3 – 15 – 36 kg

0-18 kg

MAX-FIX

0 – 18 kg

0 ~ 4 y

User instructions

www.britax.eu

EDV-Nr. 2000007169 13/03

Produkt Specifikationer

Mærke:	Römer
Kategori:	Bilsæde
Model:	Max-Fix
Bredde:	450 mm
Dybde:	530 mm
Højde:	780 mm
Vægt:	14200 g
Produktfarve:	Grå
Monteringstype:	ISOFIX
Gruppe:	0+/1 (0 - 18 kg; 0 - 4 år)