Sony RDH-GTK11IP Manual

Sony Højttaler RDH-GTK11IP

Læs nedenfor 📖 manual på dansk for Sony RDH-GTK11IP (4 sider) i kategorien Højttaler. Denne guide var nyttig for 36 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

WARNING

To reduce the risk of re, do not cover the ventilation

opening of the apparatus with newspapers, tablecloths,

curtains, etc. Do not place the naked ame sources such

as lighted candles on the apparatus.

To reduce the risk of re or electric shock, do not expose

this apparatus to dripping or splashing, and do not place

objects lled with liquids, such as vases, on the apparatus.

Do not install the appliance in a conned space, such as a

bookcase or built-in cabinet.

As the main plug is used to disconnect the unit from the

mains, connect the unit to an easily accessible AC outlet.

Should you notice an abnormality in the unit, disconnect

the main plug from the AC outlet immediately.

Do not expose batteries or apparatus with battery-

installed to excessive heat such as sunshine, re or the

like.

e unit is not disconnected from the mains as long as it

is connected to the AC outlet, even if the unit itself has

been turned o.

Notice for customers: the following

information is only applicable to

equipment sold in countries applying EU

directives.

e manufacturer of this product is Sony Corporation,

1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. e

Authorized Representative for EMC and product safety is

Sony Deutschland GmbH, Hedelnger Strasse 61, 70327

Stuttgart, Germany. For any service or guarantee matters

please refer to the addresses given in separate service or

guarantee documents.

For customers in Europe and

Australia

Disposal of Old Electrical &

Electronic Equipment

(Applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the product or on its packaging indicates

that this product shall not be treated as household

waste. Instead it shall be handed over to the applicable

collection point for the recycling of electrical and

electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. e recycling of materials

will help to conserve natural resources. For more detailed

information about recycling of this product, please

contact your local Civic Oce, your household waste

disposal service or the shop where you purchased the

product.

Applicable accessories: Remote commander

Europe Only

Disposal of waste batteries

(applicable in the European

Union and other European

countries with separate

collection systems)

is symbol on the battery or on the packaging indicates

that the battery provided with this product shall not be

treated as household waste.

On certain batteries this symbol might be used in

combination with a chemical symbol. e chemical

symbols for mercury (Hg) or lead (Pb) are added if the

battery contains more than 0.0005% mercury or 0.004%

lead.

By ensuring these batteries are disposed of correctly,

you will help prevent potentially negative consequences

for the environment and human health which could

otherwise be caused by inappropriate waste handling of

the battery. e recycling of the materials will help to

conserve natural resources.

In case of products that for safety, performance or data

integrity reasons require a permanent connection with an

incorporated battery, this battery should be replaced by

qualied service sta only. To ensure that the battery will

be treated properly, hand over the product at end-of-life

to the applicable collection point for the recycling of

electrical and electronic equipment.

For all other batteries, please view the section on how

to remove the battery from the product safely. Hand the

battery over to the applicable collection point for the

recycling of waste batteries.

For more detailed information about recycling of this

product or battery, please contact your local Civic Oce,

your household waste disposal service or the shop where

you purchased the product.

License and Trademark Notice

iPhone, iPod, iPod classic, iPod nano, and iPod touch

are trademarks of Apple Inc., registered in the U.S. and

other countries.

MPEG Layer-3 audio coding technology and patents

licensed from Fraunhofer IIS and omson.

Windows Media is either a registered trademark or

trademark of Microso Corporation in the United

States and/or other countries.

is product contains technology subject to certain

intellectual property rights of Microso. Use or

distribution of this technology outside of this product

is prohibited without the appropriate license(s) from

Microso.

All other trademarks and registered trademarks are of

their respective holders. In this manual, ™ and ® marks

are not specied.



Operations

Getting StartedLocation of Controls

Unit (Top)

Unit (Front)

Rear

Note

Headphone output is not available as this system does not have a

headphone jack.

Remote

is manual mainly explains operations using the

remote, but the same operations can also be performed

using the buttons on the unit having the same or similar

names.

To lock the buttons on the unit (Child lock

function)

You can lock the buttons except (on/standby)   on

the unit to prevent them from being operated by mistake.

Hold down  on the unit until “CHILD LOCK ON”

or “CHILD LOCK OFF” appears on the display . e

buttons except   on the unit will be locked or

unlocked.

Note

e child lock will be cancelled when you disconnect the power cord.

Tip

Operations using the buttons of the remote are possible even when the

child lock function is enabled.

Playing the iPod/iPhone

1 Select the iPod function.

Press FUNCTION +/  repeatedly.

2 Place the iPod/iPhone onto the iPod/iPhone

connector .

3 Press the PUSH button and secure the iPod/iPhone.

4 Start playback.

Press .

To control the iPod/iPhone

To Press

Pause playback    (pause) / (stop) .

Select a track

or chapter of

audiobook/

podcast

  (go back)/ (go forward)

. To fast-forward or fast-rewind,

hold down the button.

Find a point in a

track or chapter

of audiobook/

podcast

Hold down (rewind)/ (fast  

forward)  during playback, and

release the button at the desired

point.

Choose the

selected item

(enter) .

Scroll up/down

the iPod menus

 / .

Return to the

previous menu or

select a menu

TOOL MENU /RETURN 

(return) .

To use the system as a battery charger

You can use the system as a battery charger for an iPod/

iPhone whether the system is on or o.

When charging the iPod/iPhone while the system is

on, make sure to select a function other than the USB

function.

e charging begins when the iPod/iPhone is placed

on the iPod/iPhone connector . e charging status

appears on the iPod/iPhone display. When charging the

iPod/iPhone, place the iPod/iPhone on the connector

with the iPod/iPhone player stopped.

For details, see the user’s guide of your iPod/iPhone.

To stop charging an iPod/iPhone

Remove the iPod/iPhone.

Notes on charging an iPod/iPhone

When the USB function is selected while the system is on, you

cannot charge an iPod/iPhone.

If the display mode is demonstration or clock, you cannot charge an

iPod/iPhone even if the system is o.

If you press DISPLAY  while charging when the system is o,

the system stops charging an iPod/iPhone. To restart charging of an

iPod/iPhone, reconnect the iPod/iPhone when the display mode is

Power Saving mode.

Notes

Turn the “Shake to Shue” function o on the iPod/iPhone to avoid

unexpected track changes when listening to music at high volumes.

If the battery of the iPod/iPhone is empty, the system may not

recognize it. In such a case, recharge it with a computer, etc. then

connect it to the system.

e performance of the system may vary, depending on the

specications of your iPod/iPhone.

When placing or removing the iPod/iPhone, handle the iPod/iPhone

in the same angle as that of the iPod/iPhone connector on the unit

and do not twist or sway the iPod/iPhone to prevent connector

damage.

Do not carry the unit with an iPod/iPhone set on the connector.

Doing so may cause a malfunction.

When placing or removing the iPod/iPhone, brace the unit with one

hand and take care not to press the controls of the iPod/iPhone by

mistake.

Before disconnecting the iPod/iPhone, pause playback.

Hold down /    to fast-rewind (or fast-forward) while

playing video if /   does not function.

To change the volume level, use VOLUME +/ . e volume level

does not change if you adjust it on the iPod/iPhone.

is system is designed for iPod/iPhone only. You cannot connect

any other portable audio players to the iPod/iPhone connector.

To use an iPod/iPhone, refer to the user’s guide of your iPod/iPhone.

Sony cannot accept responsibility in the event that data recorded to

iPod/iPhone is lost or damaged when using an iPod/iPhone with

this system.



Playing a le of the USB device

e audio format that can be played back on this system

is MP3/WMA*/AAC*.

* Files with DRM (Digital Rights Management) copyright protection

or les downloaded from an online music store cannot be played

on this system. If you try to play one of these les, the system plays

the next unprotected audio le.

Check the websites below for the information about

compatible USB devices.

For customers in Latin America:

<http://esupport.sony.com/LA>

For customers in Europe and Russia:

<http://support.sony-europe.com/>

For customers in other countries/regions:

<http://www.sony-asia.com/support>

1 Select the USB function.

Press FUNCTION +/  repeatedly.

2 Connect the USB device to the (USB) port .

3 Start playback.

Press .

Other operations

To Press

Pause playback  (pause) . To resume play, press

the button again.

Stop playback  (stop) . To resume play, press

 (play) *

1. To cancel resume

play, press  again*2.

Select a folder +/  repeatedly.

Select a le   (go back)/ (go forward)

.

Find a point in

a le

Hold down (rewind)/ (fast  

forward)  during playback, and

release the button at the desired

point.

Select Repeat Play REPEAT  repeatedly until “ ”

(repeat all tracks) or “ ” (repeat

one track) appears.

*1 When playing a VBR MP3/WMA le, the system may resume

playback from a dierent point.

*2 Resume play returns to the top folder.

To change the play mode

Press PLAY MODE  repeatedly. You can select Normal

Play mode (playback in sequence of all les on the USB

device), Folder Play mode (“FLDR” for all les in the

specied folder on the USB device), or Shue Play mode

(“SHUF”).

Notes on the play mode

When you select Shue Play mode “SHUF,” the system shue-plays

all audio les on the connected USB device in random order. Shue

Play mode may play the same le repeatedly.

When the play mode is set to Folder Play mode, “ ” is not

available.

When the play mode is set to Shue Play mode, the repeat function

is not available.

When repeat play is set, Shue Play mode is not available. When

repeat play is set to “ ,” Folder Play mode is not available.

When you turn o the system, the selected Shue Play mode

(“SHUF”) is cleared and the play mode returns to Normal Play

mode.

Note on Repeat play

If you select “ ” when the system is in Normal Play mode, the system

executes repeat play of all audio les on the USB device until you stop

playback. If you select “ ” when the system is in Folder Play mode,

the system executes repeat play of all audio les in the selected folder

until you stop playback.

Notes

When USB cable connection is necessary, connect the USB cable

supplied with the USB device. See the operation manual supplied

with the USB device for details on the operation method.

It may take about 10 seconds before “READING” appears depending

on the type of USB device connected.

Do not connect the system and the USB device through a USB hub.

When the USB device is connected, the system reads all the les on

the USB device. If there are many folders or les on the USB device,

it may take a long time to nish reading the USB device.

With some connected USB devices, aer an operation is performed,

there may be a delay before it is performed by this system.

Compatibility with all encoding/writing soware cannot be

guaranteed. If audio les on the USB device were originally encoded

with incompatible soware, those les may produce noise or

interrupted sound, or may not be played back at all.

is system cannot play audio les on the USB device in the

following cases;

 when the total number of audio les in a folder exceeds 100.

 when the total number of audio les on a USB device exceeds

10,000.

 when the total number of folders on a USB device exceeds 100

(including the “ROOT” folder and empty folders).

ese numbers may vary depending on the le and folder structure.

Do not save other types of les or unnecessary folders on a USB

device that has audio les.

e system can play back to a depth of 8 folders only.

is system does not necessarily support all the functions provided

with a connected USB device.

Resume play will be cancelled when you disconnect the power cord.

Folders that have no audio les are skipped.

e audio formats that you can listen to with this system are as

follows:

 MP3: le extension “.mp3”

 WMA: le extension “.wma”

 AAC: le extension “.m4a”

Note that even when le name has the correct le extension, if the

actual le diers, the system may produce noise or may malfunction.



 Power

Connect the power cord to a wall outlet.

e demonstration appears on the display . When you press  , the

system turns on and the demonstration automatically ends.

If the supplied adaptor on the plug does not t your wall outlet, detach it from the

plug (only for models equipped with an adaptor).

 Audio in L/R (DVD/PC IN jacks)

Connect an optional component such as digital audio players or a device with

analog audio outputs, using a commercially available RCA audio input cable.

 Antennas

When inserting the connector of FM lead/AM loop antenna, make sure to insert it

in the correct orientation.

Find a location and an orientation that provide good reception when you set up

the antennas.

Keep the antennas away from the power cord to avoid picking up noise.

To use the system as a battery charger

You can use the system as a battery charger for USB

devices that have a rechargeable function when the

system is on.

Press FUNCTION +/  repeatedly to select the USB

function.

e charging begins when the USB device is connected

to the (USB) port . e charge status appears on

the USB device display. For details, see the user’s guide of

your USB device.

Listening to the radio

1 Select the tuner (TUNER FM/TUNER AM) function.

Press FUNCTION +/  repeatedly.

2 Perform tuning.

For automatic scanning

Press TUNING MODE  repeatedly until “AUTO”

appears, and then press +/ . Scanning stops

automatically and “TUNED” and “ST” (for stereo

programs only) light up on the display  when a

station is found.

If “TUNED” does not light up and the scanning does

not stop, press  to stop scanning, then perform

manual tuning (below).

When you tune to an FM station that provides RDS

services, information such as the service name or

station name is provided by broadcasts.

For manual tuning

Press TUNING MODE  repeatedly until “AUTO”

and “PRESET” disappear, and then press +/ 

repeatedly to tune to the desired station.

Tip

To reduce static noise on a weak FM stereo station, press FM MODE

 repeatedly until “MONO” appears to turn o stereo reception. You

will lose stereo eect, but reception will improve.

 To wall outlet

 AM loop antenna

 To DVD/PC IN L jack

 To DVD/PC IN R jack

 FM lead antenna (Extend

it horizontally.)

Installing the system

e system can be installed either vertically or horizontally. Select the installation

style based on your preferences (except for iPod nano model users). Note that with

this system, horizontal installation is required when using iPod nano models.

Horizontal installation Vertical installation

Using the remote

Insert the two R6 (size AA) batteries (supplied), matching the polarities shown below.

Notes on using the remote

With normal use, the batteries should last for about 6 months.

Do not mix an old battery with a new one or mix dierent types of batteries.

If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage

and corrosion.



Setting the clock

1 Press   to turn on the system.

2 Press TIMER MENU  to select the clock set mode.

If “PLAY SET” ashes, press /    repeatedly to select “CLOCK,” and then press (enter) .

3 Press /    repeatedly to set the hour, then press .

4 Use the same procedure to set the minutes.

Note

e clock settings are reset when you disconnect the power cord or if a power failure occurs.

To display the clock when the system is o

Press DISPLAY . e clock is displayed for about 8 seconds.

Using the iPod/iPhone

To prevent the iPod/iPhone from falling, always secure the iPod/iPhone with the holding arm when using the iPod/

iPhone with this system. When removing the iPod/iPhone, li up the holding arm until it clicks and snaps into position,

and then disconnect the iPod/iPhone from the iPod/iPhone connector.

1 Place the iPod/iPhone onto the iPod/iPhone connector.

2 Press the PUSH button until the holding arm is released with a click.

e holding arm ips out to secure the iPod/iPhone.

iPod/iPhone

connector

PUSH button

Holding arm

Note for iPod nano model users

DO NOT install the system vertically when using iPod nano models with this system. iPod nano models cannot be secured with the holding arm

because of their height. Install the system horizontally.

Note on carrying the system

DO NOT carry the system with the iPod/iPhone connected. If you do, the iPod/iPhone may fall and be damaged. Sony cannot accept responsibility

for any damage caused by inappropriate usage.

Notes

When using commercially available iPod/iPhone cases, the connected iPod/iPhone may not be recognized by the system. If this happens, remove

the case from the iPod/iPhone and reconnect it to the iPod/iPhone connector.

When using a vertically installed system, make sure that the connected iPod/iPhone remains upright, not tilted.



4-418-233- (1)11

HOME AUDIO

DOCKING SYSTEM

FST-GTK33iP/GTK11iP

RDH-GTK33iP/GTK11iP

Operating Instructions

Produkt Specifikationer

Mærke:	Sony
Kategori:	Højttaler
Model:	RDH-GTK11IP
Vægt:	16800 g
Produktfarve:	Sort
Bluetooth:	Ingen
FM radio:	Ja
Udgangseffekt (RMS):	230 W
Equalizer:	Ja
Antal USB 2.0-porte:	1
Dimensioner (BxDxH):	749 x 449 x 416 mm
Hurtig start guide:	Ja
Batterier inkluderet:	Ja
Fjernbetjening inkluderet:	Ja
Frekvensområde:	- Hz
Lyd-output kanaler:	2.0 kanaler
Understøttede radiobånd:	AM, FM
RDS Tuner inkluderet:	Ja
Mikrofonindgang:	Ja
Baggrundslys:	Ja
Fjernbetjeningstype:	RM-AMU137
Kampatibilitet med Apple-docking:	iPhone, iPod
Equalizer, funktioner:	Flat, hip hop, jazz, Pop, Rock, Techno
Indbygget oplader:	Ja