Sony VGP-PRS20 Manual

Sony Computertilbehør VGP-PRS20

Læs nedenfor 📖 manual på dansk for Sony VGP-PRS20 (4 sider) i kategorien Computertilbehør. Denne guide var nyttig for 35 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/4

Changes or modifications not expressly approved by the party responsible for compliance could

void the user’s authority to operate the equipment.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s

authority to operate the equipment.

Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with

FCC Class B limits, may be attached to this computer product. Operation with non-compliant

peripherals is likely to result in interference to radio and television reception.

All cables used to connect peripherals must be shielded and grounded. Operation with cables

connected to peripherals that are not shielded and grounded may result in interference to radio

and television reception.

If you have questions about this product, you can write to the Sony Customer Information

Service Center at 12451 Gateway Blvd., Fort Myers, FL 33913, USA or find Sony Customer

Service on the Web site at:

http://esupport.sony.com/EN/VAIO/

for customers in USA or

http://www.sony.ca/support/

for customers in Canada

Declaration of Conformity

Trade Name: SONY

Model No.: VGP-PRS20

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone No.: 858-942-2230

(For FCC-related matters only.)

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

For customers in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Before use

Before using the port replicator, please read this manual thoroughly and retain it for future

reference. See also the manuals provided with your computer for more information about

connecting the port replicator.

This port replicator is designed for Sony personal computers. However, it may not be used with

some models.

Specifications

Ports Port replicator connector: Custom connector (1)

USB : Type-A port (4) *1

External display output:

MONITOR () : Analog RGB (mini D-sub 15 pin) (1)

HDMI: HDMI output (1)

Network (LAN) : 10BASE-T/100BASE-TX/1000BASE-T (2)

Power requirement (AC adapter *

Input: AC 100-240 V, 50/60 Hz, 1.1 A - 0.5 A

Output: 19.5 V DC, 4.7 A

Operating temperature

5 °C to 35 °C (41 °F to 95 °F)

(temperature gradient less than 10 °C (18 °F)/hour)

Operating humidity

20% to 80% (not condensed), provided that humidity is less than 65% at

35 °C (95 °F) (hygrometer reading of less than 29 °C (84 °F))

Storage temperature

–20 °C to +60 °C (–4 °F to +140 °F)

(temperature gradient less than 10 °C (18 °F)/hour)

Storage humidity 10% to 90% (not condensed), provided that humidity is less than 20% at

60 °C (140 °F) (hygrometer reading of less than 35 °C (95 °F))

Dimensions Approx. 342.0 × 50.8 × 161.2 mm (w/h/d)

(Approx. 13.5 × 2.0 × 6.4 inches)

Mass Approx. 1,300 g (45.9 oz.)

Supplied accessories

AC adapter

Power cord *3

Operating instructions

*1 Compliant with the USB 2.0 standard and support high-/full-/low- speeds.

*2 Use the AC adapter (VGP-AC19V32) and power cord supplied with this product only.

*3 The numbers supplied vary depending on the country and region. Use a suitable power cord

that matches your power outlet.

Design and specifications are subject to change without notice.

English

WARNING

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

 Use the AC adapter and power cord supplied with this product only.

 To disconnect it completely, unplug the AC adapter or the power cable from

mains.

 The socket-outlet shall be installed near the equipment and shall be easily

accessible.

For customers in the USA

Owner’s Record

The model number and serial number are located on the bottom of your port replicator. Record

the serial number in the space provided here. Refer to the model and serial number when you

call your Sony Service Center.

Model No. VGP-PRS20

Serial No. ___________________

WARNING

The following FCC statements apply only to the version of this model manufactured for sale in

the USA. Other versions may not comply with FCC technical regulations.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and

can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

– Consult the dealer or an experienced radio/TV technician for help.

Avant utilisation

Avant d’utiliser le réplicateur de ports, veuillez lire attentivement ce manuel et conservez-le pour

toute référence ultérieure. Pour obtenir davantage d’informations sur le raccordement du

réplicateur de ports, reportez-vous aux manuels fournis avec votre ordinateur.

Ce réplicateur de ports est conçu pour les ordinateurs personnels Sony. Il se peut toutefois qu’il

ne puisse pas être utilisé avec certains modèles.

Spécifications

Ports Connecteur du réplicateur de ports : connecteur spécial (1)

USB : port de type A (4) *1

Sortie écran externe

MONITOR () : RVB analogique (mini D-Sub 15 broches) (1)

HDMI : Sortie HDMI (1)

Réseau (LAN)

10BASE-T/100BASE-TX/1000BASE-T (2)

Puissance requise (Adaptateur secteur *

Entrée : CA 100-240 V, 50/60 Hz, 1,1 A - 0,5 A

Sortie : 19,5 V CC, 4,7 A

Température de fonctionnement

5 °C à 35 °C (41 °F à 95 °F)

(gradient de température inférieur à 10 °C (18 °F)/heure)

Humidité de fonctionnement

20% à 80% (sans condensation), à condition que l’humidité soit inférieure à

65% à une température de 35 °C (95 °F)

(hygrométrie inférieure à 29 °C (84 °F))

Température de stockage

–20 °C à +60 °C (–4 °F à +140 °F)

(gradient de température inférieur à 10 °C (18 °F)/heure)

Humidité de stockage

10% à 90% (sans condensation), à condition que l’humidité soit inférieure à

20% à une température de 60 °C (140 °F)

(hygrométrie inférieure à 35 °C (95 °F))

Dimensions Approx. 342,0 × 50,8 × 161,2 mm (l/h/p)

(Approx. 13,5 × 2,0 × 6,4 pouces)

Poids Approx. 1 300 g (45,9 on.)

Accessoires fournis

Adaptateur CA

Cordon d’alimentation * 3

Mode d’emploi

*1 Conformité à la norme USB 2.0 et prise en charge de la vitesse haute/pleine/basse.

*2 N’utilisez votre produit qu’avec l’adaptateur CA (VGP-AC19V32) et le cordon d’alimentation

fournis avec votre ordinateur.

*3 Le nombre fourni varie selon le pays ou la région.

Utilisez un câble d’alimentation adapté à votre prise secteur.

La conception et les spécifications sont sujettes à modifications sans préavis.

Remarques sur l’utilisation

 Ne placez pas l’appareil dans des endroits :

– extrêmement chauds ou froids ;

– sales ou poussiéreux ;

– très humides ;

– soumis à des vibrations ;

– soumis à de puissants champs magnétiques ;

– sablonneux ;

– exposés au rayonnement direct du soleil.

 Ne soumettez pas l’appareil à des chocs mécaniques et ne le laissez pas tomber.

 Veillez à ce qu’aucun objet métallique n’entre en contact avec les parties métalliques de cet

appareil. Si cela se produit, un court-circuit risque de survenir et d’endommager l’appareil.

 Ne faites pas fonctionner l’appareil avec un câble endommagé.

 Ne faites pas fonctionner l’appareil s’il est tombé ou a subi des dommages.

 Veillez à ce que les contacts métalliques restent toujours propres.

 Ne démontez pas et ne transformez pas l’appareil.

 Le système chauffe en cours d’utilisation. Ceci n’a rien d’anormal.

 Gardez l’appareil à l’écart des téléviseurs et des récepteurs AM, il peut causer des interférences

dans la réception télévisée ou radiophonique.

 Lors du branchement ou du débranchement de l’appareil, manipulez-le avec soin.

 Lorsque vous transportez l’appareil, empêchez des corps étrangers de provoquer un

dysfonctionnement en utilisant la batterie, les caches de port et les protecteurs de fente

fournis, le cas échéant.

 Lorsque vous transportez votre ordinateur, veillez à retirer l’appareil au préalable. Si vous

déplacez votre ordinateur et que l’appareil est installé, l’appareil risque de tomber. Ceci peut

entraîner des blessures ou endommager l’appareil ou votre ordinateur.

Operating Instructions / Mode d’emploi /

Manual de instrucciones / Manual de instruções

Port Replicator

VGP-PRS20

¡IMPORTANTE!

POR FAVOR LEA DETALLADAMENTE ESTE MANUAL DE INSTRUCCIONES ANTES DE CONECTAR Y OPERAR ESTE

EQUIPO.

RECUERDE QUE UN MAL USO DE SU APARATO PODRíA ANULAR LA GARANTíA.

Notes on use

 Do not place the unit in locations that are:

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Vibrating

– Strong magnetic fields

– Sandy

– Exposed to direct sunlight

 Do not apply mechanical shock or drop the unit.

 Make sure that nothing metallic comes into contact with the metal parts of the unit. If this

happens, a short-circuit may occur and the unit may be damaged.

 Do not operate the unit with a damaged cord.

 Do not operate the unit if the unit itself has been dropped or damaged.

 Always keep the metal contacts clean.

 Do not disassemble or convert the unit.

 While in use, it is normal for the unit to get warm.

 Keep the unit away from TV or AM receivers, because it can disturb TV or AM reception.

 When connecting or disconnecting the unit, handle it carefully.

 When transporting the unit, prevent foreign objects from causing a malfunction by using the

battery pack, the port covers and the supplied slot protectors if there is any.

 When transporting your computer, be sure to remove the unit first. Moving your computer

with the unit installed could cause the unit to fall off, resulting in personal injury, or damage

to the unit or your computer.

 If there are any dust or dirt particles on the port replicator connector, your computer may not

be able to detect the port replicator when it is connected (even if the particles are invisible to

the eye).

If the connection seems to be poor, remove the AC power adapter and battery, and wipe off

the connector and the area around it on both the computer and the unit. Commercial air

dusters are also effective for blowing away residual dust and dirt.

Be careful not to damage the connector while cleaning them.

 When connecting the unit to a personal computer, remove the AC power adapter, LAN cable,

HDMI cable, and display cable from the computer.

 Simultaneous use of the HDMI output port and the MONITOR port is not possible.

Additionally, simultaneous use of the HDMI output port or the MONITOR port on your

computer and the HDMI output port or the MONITOR port on the port replicator is not

possible.

When the unit is connected to a personal computer, use the HDMI output port or

MONITOR port of the unit.

 The port replicator has a protective sticker covering each network (LAN) port. Connect a

10BASE-T, 100BASE-TX, 1000BASE-T cable to the network (LAN) port. Using an incorrect

cable, such as a phone cable, may result in an electric current overload that can cause a

malfunction, excessive heat, or fire in the network (LAN) port.

 It is extremely important that you replace the port replicator connector cover after

disconnecting your computer from the port replicator. If the connector is left uncovered, dust

may get inside and damage the computer.

 When sending a 3D video signal via the HDMI output port of this unit, select the STAMINA

mode with the performance selector switch on your computer.

On cleaning

Clean the unit with a soft dry cloth or a soft cloth lightly moistened with a mild detergent

solution. Do not use any type of solvent, such as alcohol or benzine, which may damage the

finish.

Trademarks

 VAIO is a trademark of Sony Corporation.

 HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

Français

AVERTISSEMENT

Afin de réuire les risques d’incendie ou de choc éectrique, n’exposez

pas cet appareil à la pluie ni à l’humidité.

Pour prévenir tout risque d’électrocution, n’ouvrez pas le boîtier.

Confiez l’entretien exclusivement au personnel qualifié.

 Utilisez uniquement l’adaptateur CA et le cordon d’alimentation fournis avec ce

produit.

 Pour déconnecter complètement votre ordinateur de la prise de courant,

débranchez l’adaptateur CA.

 L’appareil doit se trouver à proximité de la prise de courant et celle-ci doit être

facilement accessible.

Pour les utilisateurs au Canada

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

suite

Produkt Specifikationer

Mærke:	Sony
Kategori:	Computertilbehør
Model:	VGP-PRS20
Vægt:	1300 g
Produktfarve:	Sort
Antal HDMI-porte:	1
Ethernet LAN-porte (RJ-45):	2
Antal USB 2.0-porte:	4
Ethernet LAN:	Ja
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Dimensioner (BxDxH):	342 x 162.2 x 50.8 mm
Forbindelsesteknologi:	Docking
Indbygget kortlæser:	Ingen
Grænseflade:	USB
Antal VGA-porte (D-sub):	1
Kobber ethernet kabelteknologi:	1000BASE-T,100BASE-TX,10GBASE-T