Sony Wireless Buzz! Buzzers Manual

Sony Joystick Wireless Buzz! Buzzers

Læs nedenfor 📖 manual på dansk for Sony Wireless Buzz! Buzzers (1 sider) i kategorien Joystick. Denne guide var nyttig for 28 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/1

Instruction Manual

Before using this product, carefully read this manual and retain it for future reference.

These Wireless Buzz!™ Buzzers are designed for use with the PlayStation

2 console and the

PLAYSTATION

3 system.

Product Contents

WA INGRN

To avoid potential electric shock or starting a ﬁ re, do not expose this product to rain or moisture.

Precautions

Safety

This product has been designed with the highest concern for safety. However, any electrical

device, if used improperly, has the potential for causing ﬁ re, electric shock or personal injury.

To ensure accident-free operation, be sure to follow these guidelines:

• Observe all warnings, precautions and instructions.

• Do not use the product if it functions in an abnormal manner.

• This product contains small parts, which, if rem ed, may be a choking hazard to children.ov

Use and Handling

• Do not expose the product to high temperatures, high humidity or direct sunlight.

• Operate in an environment where temperatures range between 5°C and 35°C.

• Do not allow liquid or small particles to get into the product.

• Do not put heavy objects on the product.

• Never disassemble or modify the product.

• Do not throw or drop the product, or physically damage it in any way.

• Do not touch the product’s metal parts or insert foreign objects into its USB connector.

Cleaning the Wireless Buzz!™ Buzzers

Dust may build up on the product after an extended period of time.

• Before cleaning the product, disconnect it from the PlayStation

2 console or the

PLAYSTATION

3 system for safety.

• Wipe the product’s surface with a soft, dry cloth.

• The product should be cleaned by an adult, or cleaned under close adult supervision.

• Do not use a moistened cloth to clean the product as water may cause it to malfunction.

• Do not use benzene, paint thinner or other chemicals as these may damage the product.

• When using a commercially available cleaning cloth, follow the instructions supplied with it.

AA Alkaline Batteries

• Do not throw the batteries into ﬁ re.

• Do not carry the batteries with coins or other metallic objects. The batteries can generate heat

if their positive and negative terminals come into accidental contact with metallic objects.

• Do not mix new batteries with old ones.

• Do not use diﬀ erent types of battery together.

• When you are not going to use the product for a long time, rem e the batteries to avoid ov

damage from battery leakage and corrosion.

• If battery leakage occurs, wipe oﬀ any deposit and install new batteries. If the deposit sticks to

you, wipe it oﬀ thoroughly.

Connecting the Wireless Buzz!™ Buzzers

USB receiver

• Remove the receiver cap from the USB receiver and insert

its USB connector into any USB connector on the front of the

PlayStation

2 console or the PLAYSTATION

3 system.

• Turn on the PlayStation

2 console or the PLAYSTATION

system.

Wireless Buzz!™ Buzzers

• Before using a Buzz!™ Buzzer, carefully remove its battery c er ov

and insert two AA alkaline batteries (supplied).

• To turn a Buzz!™ Buzzer on, push the POWER/LOCK switch

brieﬂ y towards the POWER position. When a Buzz!™ Buzzer is

activated, its blue LED indicator will ﬂ ash rapidly eight times.

• To turn a Buzz™ Buzzer oﬀ , push the POWER/LOCK switch

brieﬂ y towards the POWER position. The Buzz™ Buzzer’s blue

LED indicator will ﬂ ash slowly four times to indicate that it has

turned oﬀ . NOTE: A Buzz!™ Buzzer will turn oﬀ automatically if

left idle for 20 minutes.

• When using a Buzz!™ Buzzer, push the POWER/LOCK switch

into the LOCK position to make sure it doesn’t turn

oﬀ accidentally.

SLEH-00069

Pairing the Wireless Buzz!™ Buzzers

These Wireless Buzz!™ Buzzers have already been paired with the supplied USB receiver. If a

replacement Buzz!™ Buzzer is introduced, all four Wireless Buzz!™ Buzzers must be paired with

the USB receiver again.

• Push the POWER/LOCK switch on all four Wireless Buzz!™ Buzzers into the POWER position

and hold it for four seconds, until their blue LED indicators glow continuously. Be sure to

perform this operation within two metres of the PlayStation

2 console or the PLAYSTATION 3 ®

system.

• Press and hold the BIND button on the USB receiver. Its blue LED indicator will glow and ﬂ ash

once as each Buzz!™ Buzzer successfully pairs.

• As each Buzz!™ Buzzer pairs with the USB receiver, its blue LED indicator and red Buzz!™

button will ﬂ ash brieﬂ y, indicating a successful connection and pairing. To test the connection,

press any button and the blue LED indicator on the Buzz!™ Buzzer and the USB receiver will

ﬂ ash brieﬂ y.

• The USB receiver will pair with a maximum of four Wireless Buzz!™ Buzzers. To play with ﬁ ve to

eight Wireless Buzz!™ Buzzers, a second USB receiver is required.

Using the Wireless Buzz!™ Buzzers

When turned on, ensure that the Wireless Buzz!™ Buzzers are within approximately 10 metres of

the PlayStation

2 console or the PLAYSTATION

3 system. The usage and function of the product

may vary depending on the software in use. See the appropriate software manual for details.

Troubleshooting

If you experience any diﬃ culties while using the product, please call the appropriate PlayStation

customer service number which can be found:

– within every PlayStation

2 and PLAYSTATION

3 format software manual; and

– on our website at playstation.com

Speciﬁ cations

Interface (USB receiver and PS2™/PS3™) USB type 1.1

Interface (Buzz!™ Buzzer and USB receiv er) RF 2.4GHz, GFSK

USB connector (USB receiver and PS2™/PS3™) USB type 1.1

USB connector (Buzz!™ Buzzer and USB receiver) RF 2.4GHz, GFSK

Power consumption (USB receiver) Max. 100mA @ 5V

Power consumption (Buzz!™ Buzzer) Max. 45mA @ 3V

Buzz!™ Buzzer dimensions (approx.) 137 x 54 x 49mm

USB receiver dimensions (approx.) 77 x 23 x 8mm

)seirettab AA tuohtiw( g913 ).xorppa( thgiew latoT

C°53 - C°5 erutarepmet noitarepO

Next time you replace your batteries, think about purchasing Sony

rechargeable batteries. Using one Cycle Energy Blue

rechargeable battery is the equivalent of using 1000 disposable

batteries. Save money and be environmentally conscious!

Visit us at: sony-europe.com/energy

The manufacturer of this product is Namtai Electronic (Shenzhen) Co., Ltd. located at Gushu

Industrial Estate, Xixiang, Baoan, Shenzhen, 518126 China. Distributed in Europe by Sony

Computer Entertainment Europe Ltd, 10 Great Marlborough Street, London, W1F 7LP.

Where you see either symbol on any of our electrical products, batteries

or packaging, it indicates that the relevant electrical product or battery

should not be disposed of as general household waste in Europe. To

ensure the correct waste treatment of the product and batteries, please

dispose of them in accordance with any applicable local laws or

requirements for disposal of electrical equipment/batteries. In so doing, you will help to conserve

natural resources and improve standards of environmental protection in treatment and disposal of

electrical waste.

Design and speciﬁ cations are subject to change without notice.

“2”, “PLAYSTATION” and “PlayStation” are registered trademarks of Sony Computer Entertainment Inc. “ ” is a registered

Wireless Buzz!™ Buzzers

POWER/LOCK switch

blue LED indicator

battery c erov

• Four Wireless Buzz!™ Buzzers.

• Eight AA alkaline batteries.

• One USB receiver with receiver cap.

• One drawstring bag.

Produkt Specifikationer

Mærke:	Sony
Kategori:	Joystick
Model:	Wireless Buzz! Buzzers
Vægt:	319 g
Dimensioner (BxDxH):	137 x 54 x 49 mm
Forbindelsesteknologi:	Trådløs
Batteritype:	AA
Mac kompabilitet:	Ingen
Trådløs rækkevidde:	10 m
Enhedstype:	Gamepad
Minimum systemkrav:	Sony PlayStation 2/PlayStation 3
Mængde pr. kasse:	4 stk