SSV Works GN-F65 Manual


Læs nedenfor 📖 manual på dansk for SSV Works GN-F65 (2 sider) i kategorien Højttaler. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
GN-F65
Polaris General
6.5” Speaker Front Kick Panels
SSV WORKS, 201 N. Rice Ave Unit A, Oxnard, CA 93030
www.SSVworks.com | Phone: 818-991-1778 | Fax: 866-293-6751
!
Please read and understand these
instructions completely before
installation to avoid possible injury, or
damage to the accessory or vehicle.
WARRANTY INFORMATION:
All SSV Works enclosures are covered by a limited lifetime warranty against
defects in material or workmanship. All SSV Works Electronics are covered by a
limited 1 year warranty against defects in material or workmanship. All SSV Works
Speakers are covered by a limited 1 year warranty against defects in material or
workmanship. Labor for replacement of defective components is not covered.
Contact SSV Works for further warranty information.
TOOLS NEEDED FOR INSTALLATION
PARTS LIST IMAGES
CREASE LINE
CREASE LINE
PASSENGER SID E
CREASE LINE
CREASE LINE
DRIVER SIDE
2. M6 x 1.0 Screws x 6
1. GN-F65 Enclosures
(1 pair)
4. Drll Template
3. M6 Washers x 6
- T-30 Torx Driver - Drill with 1/4” Drill bit - Scribe or Punch tool
A. Cut out the INSIDE template (Driver/Passenger) along the cut
line. Position the template on kick panel above the foot rest
making sure to line up arrows on template to the curves of the
panel as seen on image A.
B. Using a scribing tool, mark the center of the 3 drill points
illustrated on the template as shown on image B.
A B


Produkt Specifikationer

Mærke: SSV Works
Kategori: Højttaler
Model: GN-F65

Har du brug for hjælp?

Hvis du har brug for hjælp til SSV Works GN-F65 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler SSV Works Manualer

Højttaler Manualer

Nyeste Højttaler Manualer