SSV Works WP-RZO + 2 Manual

SSV Works Højttaler WP-RZO + 2

Læs nedenfor 📖 manual på dansk for SSV Works WP-RZO + 2 (2 sider) i kategorien Højttaler. Denne guide var nyttig for 9 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
Tools Needed For Installaon
WP-RZO + 2
POLARIS RZR OVERHEAD 2 SPEAKER ADD ON
Drill with Drill bits
Phillips Head Screwdriver
Wire Crimpers / Strippers
Thread locker
1) From the underside of the cage, place the enclosure into the rear cage area.up
2) While holding the enclosure in place, put one of the brackets on top of the enclosure and using the
screws provided. Screw into the threaded insert on the enclosure. Do not over tighten the screws. (it is
recommended to use -Tight or another type of thread locker to prevent the screws from Loc
loosening)
3) Repeat for the second bracket
4) This is an step that can be done if you desire, Using a drill and drill bit, pre drill the holes for the optional
screws to mount the brackets to the cage, Once the holes are pre drilled, screw the provided screws into
the holes you just drilled to secure the enclosure in place.
Figure 4
Figure 1 Figure 2
Figure 3


Produkt Specifikationer

Mærke: SSV Works
Kategori: Højttaler
Model: WP-RZO + 2

Har du brug for hjælp?

Hvis du har brug for hjælp til SSV Works WP-RZO + 2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Højttaler SSV Works Manualer

Højttaler Manualer

Nyeste Højttaler Manualer