Star Micronics TSP100IV Manual

Star Micronics Printer TSP100IV

Læs nedenfor 📖 manual på dansk for Star Micronics TSP100IV (2 sider) i kategorien Printer. Denne guide var nyttig for 8 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Download PDF

Side 1/2

For the owners of other companies’ trademarks mentioned in this document,see Trademarks in our website (https://www.star-m.jp/eng/trademarks.html).



Connect the printer to the internet.

(See “Wired LAN” in Step 1 “Connecting a

Tablet or PC”)



Scan the QR code from a smartphone or

tablet to access the registration site for

“Star Micronics Cloud Services”.



Follow the procedures to register the printer

with “Star Micronics Cloud Services” to start

using the services.

Registration

site

Digital Journal,

Printed

Promotion,

and more！

Service site

FREE services are available if you register

TSP100IV with Star Micronics Cloud Services.

Cloud Services

Star Windows Software

ⓘ The Windows driver is included in the

Star Windows Software.

The Star Windows Software can be

used to configure the printer settings

and perform an operation test.

 Download [ Star Windows Software ].

 Extract the downloaded software and

execute “Setup.exe”.

 Follow the wizard instructions and

complete software installation.

When using Windows

Star Quick Setup Utility

ⓘ For a wired LAN connection, use the

tablet that is connected to the same

network as the TSP100IV.

 Once a static IP address is assigned, IP address changes through the DHCP server will

not occur, so the specied connection destination device can be used continuously

once set.

 Install [ Star Quick Setup Utility ].

 Open the conguration utility, and

select [ Start Guide (Initial Settings) ] -

[ Search Printer ].

 Follow the instructions of the utility to

connect and set up a tablet.

When using Android iOS/

Preparing/setting up the conguration app

Conguration app

download site

ⓘ

Driver download site for Mac / Linux environment. (https://www.star-m.jp/supportsite-wsw.html)

Use the configuration app to set up the

printer from a tablet or PC.

Scan the QR code on the right side or search

the app to access the download site.

Turn on the power to the printer , and

check the blue LED lights up.

Connect the included power cable to the

inlet on the back side of the printer

.

Connect the plug of the power cable to the

outlet.

Turning on the Main

Unit Power

Pull the end of the paper out straight,

and push down both sides of the printer

cover to close .

Insert a paper roll in the direction shown in

the illustration .

To change the paper width, the

memory switch must be set. Refer to

the online manual for details.

ⓘ When using a paper roll with 58 mm

width, install the supplied paper

guide into the printer.

Push the cover opening lever  and then

open the printer cover .

2 Inserting a Paper Roll

Easy Setup

Guide

Safety

Instructions

Rubber

Feet

Paper Roll

GuideUSB CablePower Cable* LAN CableTSP143IV-UE

This Sheet

If contents are missing or damaged, please contact the reseller that sold you

the printer.

*accessories vary depending on the region where the printer was purchased.

What's Included

FAQ

TSP100IV online manual

This document explains the setup procedure for the TSP100IV.

For further instructions, please refer to the TSP100IV online manual. Please read

the instructions before using the printer. You can also see FAQ from the QR code

on the inside of the printer.

Introduction

Easy Setup Guide TSP100IV

80878781

ⓘ

Please refer to the above Service site for

available countries.

Communication and Recharge

Communication

Plug for the printer

Windows, Mac, Linux

Connecting a Tablet or PC

Connect an appropriate cable to the connector on the printer according to your

operating environment.

USB-A

You will need: USB cable included with the printer.

Plug for the printer

USB-C

You will need: USB cable included with the printer.

Wired LAN

You will need: LAN cable included with the printer.

Android

USB-A

Windows

USB-CLAN

3 12

ⓘWhen using a USB cable that is available commercially or that came with a

smartphone or tablet, perform thorough operation verification.

Android

Produkt Specifikationer

Mærke:	Star Micronics
Kategori:	Printer
Model:	TSP100IV

Har du brug for hjælp?

Hvis du har brug for hjælp til Star Micronics TSP100IV stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Star Micronics Manualer

Star Micronics TSP100IV Manual

5 September 2024

Star Micronics BSC10II-UE Manual

5 September 2024

Star Micronics SP700 Manual

21 August 2024

Star Micronics TSP1000 Manual

16 August 2024

Star Micronics TSP-L10 Manual

15 August 2024

Star Micronics mC-Print2 Manual

14 August 2024

Star Micronics TSP700II Manual

14 August 2024

Star Micronics TSP100III Manual

13 August 2024

Star Micronics TSP654IIBI-24 Manual

12 August 2024

Star Micronics SM-T400i-DB50 Manual

12 August 2024

Printer Manualer

Nyeste Printer Manualer

Huawei PixLab X1 Manual

21 December 2024

HP Deskjet 3000 Manual

21 December 2024

HP Color LaserJet 2500L Manual

21 December 2024

HP LaserJet P3005x Manual

21 December 2024

HP ENVY 4500 e-All-in-One Manual

21 December 2024

Samsung SCX-3205 Manual

21 December 2024

Pantum BP4200DN Manual

20 December 2024

Pantum BP4200DW Manual

20 December 2024

Pantum BM4200AD Manual

20 December 2024

Pantum BM4200ADN Manual

20 December 2024